Become a Patron!

ENDED~~~~~~~ORIGIN VAPES Horizon Tech Phantom Tank GIVEAWAY! ENDS 10/10/2015

Roadtrip635

Roadtrip635

Gold Contributor
Member For 4 Years
10/02 #3

Origin_Vape_UD_Youde_Pre-built_Clapton_Coils_A1_Kanthal_26GA_and_32GA_Sub-Ohm_02.jpg
 
100%VG

100%VG

Bronze Contributor
Member For 4 Years
10/03
Entry #1

PIF to the next person to post.

Smok XCube 2 160W in Black
https://originvape.com/product/smok-xcube-2-160w/

The bigger, badder brother of the XCUBE, the Smok XCUBE 2 is a 160 watt temperature control box with upgradeable firmware. This mod does not charge via USB, you need to charge the dual 18650 batteries externally. Clear-coated, black finish with a 16-color changeable LCD color panel!
  • Manufactured by Smok, creators of the M80
  • Dual-battery mod, takes 2 18650 batteries sold separately
  • Firmware is upgradeable via enclosed mini USB cable
  • Firmware version: 1.080
  • Velvet pouch to safely store your mod without damaging it
  • Black paint with clear coat surface
  • OLED readout on top
  • Firing button is the side of the mod
  • 160 watts of power
  • Temperature control & Variable Wattage modes
  • Scratch-off authentication verification
 
Vapingbeauty

Vapingbeauty

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
10.3.15
#1
IPV3 Li Mod by Pioneer4You

Sent from my SM-N910V using Tapatalk
 
100%VG

100%VG

Bronze Contributor
Member For 4 Years
10/03
Entry #2

PIF to the next person to post.

SX Mini M-Class by YiHi
https://originvape.com/product/sx-mini-m-class/

Newest batch with revisions applied (June 2015)

  • Made by Yihi to extremely high standards
  • SS firing button
  • SS spring-loaded 510 connector
  • 60W in regulated mode, 85W in bypass mode (mechanical mode)
  • SX350J platform
  • Temperature control functionality – Joule mode
  • Reads resistance down to 0.15 ohms in variable wattage mode
  • Reads resistance down to 0.05 ohms in Joule mode
  • Internal and external stainless steel torx screws
  • Gravity sensor
  • Upgradeable firmware
  • Joule output: 10J-60J
  • Temperature range: 200F-580F
  • Chargeable via mini USB
 
100%VG

100%VG

Bronze Contributor
Member For 4 Years
10/03
Entry #3

PIF to the next person to post

IPV3 Li Mod by Pioneer4You with Temp Control
https://originvape.com/product/ipv3-li-mod-by-pioneer4you/

This mod features the newest YiHi chipset, and has many engineering refinements over the IPV3. Only the case is the same! 200 Watts of power after the newest firmware update.

IPV3 Li Mod Features Include:
  • YiHi temperature control chipset
  • Reads resistance down to 0.1Ω in Power mode
  • Reads resistance down to 0.05Ω in Joule Mode
  • Redesigned internals
  • All-aluminum body works as a heat sink
  • Wattage output 7W-165W
  • Built by Pioneer4You
  • Takes dual 18650 batteries in series (not included)
  • YiHi SX330-V3SL Upgradeable chip
    • 165 watts upgradeable to 200 watts with a later firmware update
  • Touch sensor functionality has returned
  • Limited warranty – USA service center.
  • No direct charging capability
  • New IPV3 Li firmware will be uploaded to P4U’s website on 6/20/15
    • After the firmware upgrade, Power mode will support 200W max.
    • After the firmware upgrade, Joule mode will support 75J max.
    • After the firmware upgrade, The mod has the capability to read titanium and nickel wire to control temperature.
 
You must log in or register to reply here.

VU Sponsors

Top