Become a Patron!
Mutation Indulgence RTA (Tank)
- Thread starter VAPEROXX
- Start date
So did I. Waiting for it to ship. Haven't been this hyped for a tank in a whike.
Got two of these. However, just one is in use. My wicking isn't perfect yet, due to slight leaking when re-filling.
Yeah, another Human showed me his Mutation RTA and raved about it so I scratched the shiny-itis itch and the lil biotch is on the way. I'm a sucker for shiny shit. This Human claimed to be fitting 3mm ID coils into this rascal. True?
True.
Watch the video at vapordna. http://www.vapordna.com/Project-Sub-Ohm-Edition-Mutation-X-MT-RTA-p/psomxr.htm
I did, even before I bought it.
BTW, what is the ID of your coils? I'm currently using 3 mm.
I'm running 2.5 mm parallel 24g KA1 7 wraps, .15 ohms
obsolete post
Last edited:
Holy crap! I just got mine, cleaned it and built it. Using rabbit wire. Dual 3mm; 10 wraps; .18 ohm. This thing is good. My 3 MG juice has me messed up. Like a nasty dripped build. Can wait for my mech box. Probably won't be able to walk straight afterwards.
Sick tank. I'm vaping it on a dual battery mech box, but I've tossed it on a VW box and taken it up to 150 watts and no burnt hits. I'm just running 2.5mm coils but there is room for more. Flavor is pretty good on it too. Great tank.
I think the drip tip is too small, but the can be easily fixed. My only con.
Sent from my SM-N920T using Tapatalk
510 clipping the wire? The 510 is usually the connections between the atomizer and the mod. However, if you're talking about the fastening screws cutting the wire, you can smoothen the edges, by either sand paper, and/or file.0.19ohm twisted 26gk on a 2.4mm screwdriver. I was having trouble with the ohms jumping around until I adjusted the 510. It was clipping the leads on 28th ni200. Any suggestions how to prevent that? Works great with a thicker gauge wire though.
Sent from my SM-N920T using Tapatalk
Yeah, sorry. Two different issues there that ran together when typed. I haven't thought about smoothing the screws to prevent clipping the leads. I'll give that a shot. Thanks @Neunerball
Sent from my SM-N920T using Tapatalk
Sent from my SM-N920T using Tapatalk
I just got mine in the mail today and Im really liking it! I tossed in a dual coil build with 24g kanthal 8 wraps 2.5 id .30ohms, running 60w on my Ipv3 li. So far this thing is as close to a dripper as Ive ever had with a tank. I dont taste any flavor loss like I kind of expected after reading a few reviews. And I actually really like the short drip tip that comes with it as well.
I have yet to refill it so I dont know how well my wicking did to prevent the refill leak but so far I really really like this tank! I feel a refill coming very soon tho, this bitch guzzles juice but I expected that!
I have yet to refill it so I dont know how well my wicking did to prevent the refill leak but so far I really really like this tank! I feel a refill coming very soon tho, this bitch guzzles juice but I expected that!
martinelias
Silver Contributor
Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Not much of a tank guy but havent tried 1 since the first atlantis, so i was going to pull the trigger on an aromamizer, crown or smok... i think i'll get this instead. Looks pretty sick.
Sent from my SM-N920T using Tapatalk
Sent from my SM-N920T using Tapatalk
I sold my Aromamizer. It was just kinda a flat vape, even at higher watts. Hard to explain but it just wasn't my thing. This Mutation X and the Crius were much better tanks for me.
TT
TT
I really want grub screws. The stock screws are giving me a run for my money
LOL, they already have a newer tank now. The Mutation X Mutank Sub-Ohm Tank System, for those, that like replacement coil heads. 
Including a silicone band.
Including a silicone band. 
ddloco
Member For 4 Years
I got the mutank it's a beast in rebuild mode I got dual 22ga 5 wrap on 2.5mm rod ohms out to .19 not a dry hit yet at 100 watts, wicking for me is gonna be a learning experience I get leaks when filling up I have not tried the pre-made coils yet but the RBA is killer it's so much vape I've been coughing like crazy, I love it lol
Sent from my SM-N910T3 using Tapatalk
Sent from my SM-N910T3 using Tapatalk
There are no pre-made coils...it's an RTA ONLY...
ddloco
Member For 4 Years
its the newer one the mutank it's both the even have Clapton and twisted coil heads avaliable
Sent from my SM-N910T3 using Tapatalk
Oh that one. Heard about it, but rebuildable decks are my thing.
ddloco
Member For 4 Years
it comes with the same type of rebuild deck that comes with the mt
Sent from my SM-N910T3 using Tapatalk
Nice. I just don't do pre-made coils so there is no point in me getting one. My next purchase is a VCMT by Vaperz Cloud.
That tank does look badass! I'm giving it some serious consideration even with a bit higher price. As far as this Mutation Tank. I think for their first go at an actual RTA its pretty good. I really dislike the post screws and every other refill it seems like it likes to leak pretty unpleasantly even with the air flow closed off. For me its a stay at home tank more than anything, I do like it, but I'm not exactly in love with it. My first build went very smoothly then I tried to use one of my own screwdrivers with a new build and shredded 2 of the post screws
From what I've seen the main objective is to make sure the juice channels are blocked off pretty solidly so juice can't flow behind the wicking & make it's way into the center area of the deck too much. Packing it in towards the back of the channel should take care of it, still leaving some fluff in the wick. That should help with leak issues.
iSubOhm
Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Never mind.. This new Mutank looks like it craps on the TFV4.. Glad this came out before I ordered a TFV4. Definitely getting Indulgences new tank before I get Smok's
I'm the illegitimate love-child of strategy and creativity. Now neither parent admits to having me.
I'm the illegitimate love-child of strategy and creativity. Now neither parent admits to having me.
When I've had leak issues on other tanks the first thing I would try is to close the air flow completely while filling and after I have it filled I then turn it upside down before opening the air flow. Actually made that my normal procedure now. Also allows make sure to leave a small air gap in the tank when filling. (Sure you're already doing that tho)
Does it leak just at the first or leaks some continually?
Does it leak just at the first or leaks some continually?
If you stuff and tuck it like a dripper, it should be fine. Can't really over wick this. I don't do fancy coils, so I can do regular ss wraps at 3mm and that's enough cotton to stop leak period. With 3mm coils, I feel I can refill it with the airflow open.
Good point, kinda looked over the point about the coil size. I agree that 3mm coils do give the ability to use enough cotton.
Good deal. I wicked just like I wick the mutation X v4 rda and no leaks
Your suggestion is good,how about this? Close the air flow completely while filling,and open the air flow after filling,then put it aside for several minutes.It will not leak.Looking for your comments lol
I bought the mutank too,I tried by this way,no leaky haha
The Moohhh tank is on my wish list. I got two MT-RTA, but only one is currently in use. Started off with 3 mm coils, I only had slight leaking, when refilling. However, the turning upside down thingy helped avoiding it.