Get ticker clouds

Silentbob1990 · Jan 19, 2016

Thanks in advance trying to get some ticker clouds and bigger with out blowing my face off trying to sub ohm below .2ohms . I have right now 24 26 29 gage a1 wire vaping on a Apollo with 9heaven 13 hell rda. So any help will be greatly appreciated

kickboxerwalker · Jan 20, 2016

A simple parallel coil may be a good place to start. Try 5 wraps of the 24 or 26 in parallel.

Sent from my iPhone using Tapatalk

Neunerball · Jan 20, 2016

Silentbob1990 said:
Thanks in advance trying to get some ticker clouds and bigger with out blowing my face off trying to sub ohm below .2ohms . I have right now 24 26 29 gage a1 wire vaping on a Apollo with 9heaven 13 hell rda. So any help will be greatly appreciated

What mod and batteries are you using?

Neunerball · Jan 20, 2016

kickboxerwalker said:
A simple parallel coil may be a good place to start. Try 5 wraps of the 24 or 26 in parallel.

Sent from my iPhone using Tapatalk

That doesn't mean, he doesn't blow his face off.

raymo2u · Jan 20, 2016

I would advise using something that produces alot of heat, has alot of surface area and holds juice just as well as the cotton. I would suggest some fused claptons.
Some 2 x 24g or 26g/32g-40g Fused Claptons with 3mm ID and 5-7 Wraps will do it. Make sure on the 13H9H Rda to close the airflow down a half of a bump and you will also add to vapor density. You can also Stage it with some 24g or 26g to help with Ramp up.

3 x 34K 40N Paralleled with 28K (The Perfect Flawless Build) .jpg

Density is something that most clouds are missing, thats where the flavor is!

Silentbob1990 · Jan 20, 2016

Neunerball said:
What mod and batteries are you using?

Apollo clone and mxjo 18650 2500mah

Neunerball · Jan 20, 2016

Silentbob1990 said:
Apollo clone and mxjo 18650 2500mah

Your battery has a continuous discharge rate of 20A only. Therefore, the lowest resistance you can use is 0.3 Ohm. See http://www.steam-engine.org/batt.asp
You can use http://www.steam-engine.org/coil.asp as a guideline for your coil builds. However, verify your build with an Ohm meter. Otherwise, you might blow your face off.
If you want to make lower resistance coil (s), get http://liionwholesale.com/collectio...2100mah-flat-top-wholesale?variant=1038136780

Silentbob1990 · Jan 21, 2016

Neunerball said:
Your battery has a continuous discharge rate of 20A only. Therefore, the lowest resistance you can use is 0.3 Ohm. See http://www.steam-engine.org/batt.asp
You can use http://www.steam-engine.org/coil.asp as a guideline for your coil builds. However, verify your build with an Ohm meter. Otherwise, you might blow your face off.
If you want to make lower resistance coil (s), get http://liionwholesale.com/collectio...2100mah-flat-top-wholesale?variant=1038136780

So I'm picking up a parallel box mod today will that be better

raymo2u · Jan 21, 2016

Silentbob1990 said:
So I'm picking up a parallel box mod today will that be better

Think of Parallel as 1.5x's the headroom with amperage, it is not a full double amperage spec. It may be batter/safer then a single battery but the batteries still matter. Do not cheap out on the brain and heart of your setup, these are what holds your faces/hands fate when pressing the fire button.

With 20A CD cells I would only limit your build to a 30a, maybe 35a.

Silentbob1990 · Jan 21, 2016

raymo2u said:
Think of Parallel as 1.5x's the headroom with amperage, it is not a full double amperage spec. It may be batter/safer then a single battery but the batteries still matter. Do not cheap out on the brain and heart of your setup, these are what holds your faces/hands fate when pressing the fire button.

With 20A CD cells I would only limit your build to a 30a, maybe 35a.

Oh I know. I don't buy cheap stuff when it comes to my safety I've been look at one for awhile so I've done why research

Silentbob1990 · Jan 21, 2016

raymo2u said:
Think of Parallel as 1.5x's the headroom with amperage, it is not a full double amperage spec. It may be batter/safer then a single battery but the batteries still matter. Do not cheap out on the brain and heart of your setup, these are what holds your faces/hands fate when pressing the fire button.

With 20A CD cells I would only limit your build to a 30a, maybe 35a.

Oh I know. I don't buy cheap stuff when it comes to my safety I've been look at one for awhile so I've done why research

Get ticker clouds

VU Sponsors