Its a regular 18-- series nemesis
Fresh build, dual 6 wrap 24g royal wire at 0.16 ohm with some Japanese Ko Gen Do cotton
Thanks, thats exactly what i was looking for.
I onced made a peach RY4 mix that somehow smelled like cat urine. It took me and my GF an hour to realize it was the juice while searching around...
Anyone who is good with electronics, can you draw up a basic wiring diagram for an unregulated mod using a N channel Mosfet to offset the amperage...
Some coil abuse
Issue is with the way a switch works that with every time you pass current that is over the maximum rating it damages the switch.
It can cause...
I figured best thing for clouds would be just pure VG with just small amount of flavoring. As I noticed some flavors seem to be too much at very...
Can someone help me out with basic wiring of a mosfet for a box mod.
I am trying to use a mosfet in unregulated mode just to offset the AMP...
My DIY bottom feeder
I don't miss hacking up a lung every morning
I don't miss dying after running a mile
I don't miss yellow fingers
My personal favorite is a 6 wrap royalwire 24g duals, meters at about 0.16 ohm
Tried it it did seem to produce more vapor, but than i just ordered a cherry vape drip tip to not deal with spit back
My current favorite is the TFA green tea with a little apple.
Last nights build. Dual 9 wrap 22g using royal wire with Ko Gen Do japanese cotton wicks. Meters out to 0.18 ohm
A shot form last night
Twisted 26g Dual micro coils at 0.26 ohm. Great flavor
If I could only have one it would be my Reos
My new Vanilla, love this setup
Most of it straight from camera with just basic exposure, color balance and temperature adjustments.
I use of camera flashes with color gels to...
For juice tasting I prefer to make a small micro coil and than feed a small piece of oxidized mesh through it. Holds a few drops of juice and easy...
One more to keep you guys going
Some twisted 28g, came out to 0.36 ohm great setup got the TOBH with lots of lavor
Combination of two of my favorite things :D
4 strand 24g 4 wrap 0.2 ohm
Totally agree I wish i has some photos of my first builds, they were scary looking.
One more for now. And as a heads up the guice is just some plain VG with food coloring for effect
I don't its actually very dull looking now. I tried to keep it polished but it was just too much of a hassle.
I love Standard cell block 4 and a nice dark stout like Imperial Russian Stout
Does this count? Most my mods have patina on them, the bling attracts too much finger prints
Loving the new community and the interface for the forum.
I totally agree that is Vape Art for sure.
Just wanted to share some of my Vape art with you guys.
I will post up more later if people are interested in seeing more. Also...
SHould work fine in a tube mod just doa 26650 diameter tube with a 18650 battery or a Zen style setup.
More info can be found here.
Not sure how they are planning on using them though..
One more build a single 20g 5/6 wrap. Build produced large amount of vapor but was a little too hot for my liking
Wow that looks like a perfect DIY board as far as dimensions go, odd that no USB charging.
I would love for the negative posts to be attached from the bottom with screws instead of press fit
One of my all time favorite builds, but a total pain to build. Stacked 26g quad coils at 0.18 ohm.
Yeah if I don't find a 30 amp switcha mosfet setup is my backup plan
I was talking about making an unregulated Box mod at wich point all of the current would be running through the switch.
I am addicted to buying drip tips. Have probably close to 40 of them.
As far as large bore tips check this out:...
I am still in search of a 30 amp momentary switch. I would love to make a unregulated box mod but so far the switch seems to be a limiting factor....