The 510 on an rda, rta should always be screwed on tight. The 510 on the hog is just adjustable rather than spring loaded. 1 thing i found with my...
If it's jerking you may not have your cores centred perfectly. Talcum powder can help or as Meg said, eliquid or even water. But everyones...
Meg was/is a pleasure to deal with. Fast, courteous and fair, she is also willing to help with any queries. Would highly recommend!
Isn't he cute!
Has anyone tried the steamcrave titan? I like the idea of a series build deck. Being able to hold 28mls is a bit ridiculous, so is 18mls, but in...
That's not good news but thanks for the tip
I got 1 too! You, 1st hog coming my way - slowly. Delivery could take 5 lonngggg weeks, and $30usd postage. Fuckers!
Haha, I've seen his vid and some of my decores have been like that. Think i got carried away! I had to change to a board anyway for when i get my...
Scratch that Mge, silly question. I've changed my set up. Attached swivels to a board and put that in vice. Bit smoother now! D'oh.
Hey all, this would be much easier with a pic but I'm not at home so I'll try explain. I'm using 3 big swivels atm, same as I've seen a couple of...
I now know how important it is setting up your core wires. It takes me a while but i get there eventually! Lol. The most success with making...
Bloody hell! Why can't there be a right way and a wrong way! It would make, life so much easier!
BTW, I'm assuming that a slider is a bit of well, crimped ribbon, that you can use to keep wires in place? I've never actually used 1. Would they...
Ha the Australian govt recently tried to enforce $5 for each item coming into the country! Thank god it didn't pass. The Aussie/canadian dollars...
I'll give that a go. Making staples is a piece of cake, all I've gotta do now is get my stagger - ing sorted. I'm gonna need more wire at this...
Actually, I've got 1 more for you. When using ribbon, is there any way to make it nice and straight? Every now and then it gets caught on the roll...
Cool thanks.
Hey guys, this is going to sound like a dumb arse question after reading the last few Mges but here goes. When I'm making my decores i find i get...
Thanks, I'll have a look.
I'm hoping that with the lt spinner and the dual core holder thingy I'll be able to make 9 or 10 inches at a time. It's not a big deal but setting...
Yeah it's the wrap wire that overlaps just once. I've found if i make 6inch cores then they don't collapse.
Ah OK, i understand. I'm probably just to the left of my drill when i start so i could, move over a touch. But, because I'm only making 6 inches...
Do you mean you don't wrap the 1st few inches of your core wires? Is that it?
Sorry, i don't really understand that. Starting in the middle? I make 6 inch cores and start right at 1 end, by the drill. It works beautifully...
Hmm. Just shouldn't be happening though. I'm supposed to get my spinner in a week so i might just make heaps of decores and fused Claptons till it...
Hey, the last 3 aliens I've made, and I'm just making 6 inches at a time to make things easier, as soon as i hit the exact middle it's doubled...
That probably makes 2 of us!
Yeah i did a bit of research and didn't read anything about that. Maybe it's cos of her girlie arms! Lol
You serious Meg? Bout the x1?
Back to coils, i tested my build on my coilmaster 521 mini tab a couple of days ago and it came in at .1ohms. Today, it's reading .14. Is this...
Apologies for posting that Mge in this section, i was hoping to get an informed opinion. I'll research them.
Hey, which would you rate higher, the x1 or the vcm mech? Sorry to go off topic but I have the option to buy 1 of either cheap right now. X1 comes...
I realised my mistake as soon as I'd made it, luckily, so it's still usable. Sort of. I didn't know about the 90 degrees on the wrap, I just judge...
Man that sounds like a hassle with the kanthal. Pity I bought 500ft of 36g. I'll use it to practice my alien building.
I'm so jealous of both of you! Iknocked out my 2nd alien, the 1 with a tiny imperfection. For some reason it decided to overlap - once! Then went...
OK, I'll keep an eye out for that. And your right, I don't need problems when I'm away from home cos I only carry batteries and juice. Maybe I'll...
Another quick question, if you make a small mistake while wrapping your cores, and I do mean small, is it still usable? I wrapped it and put it in...
It's weird, it's not spitting and it's not even popping the way I've experienced it before. It's a great vape, just odd. I'll see how it goes over...
I know this has nothing to do with aliens but here goes, I put some fused Claptons, ni80, in rda last night and they're making a strange soft...
I'll try both and see how I go. I need the practice anyway. And thanks, I think all the problems I was having was down to not stretching my decore...
I thought that might be the case. I think I'll stick with the ni80. I prefe the taste too.
Hey, I've been making my decores out of 40ni80 but i also have some 36g kanthal. I wanted 36g ni80 but the store had sold out. Anyway, is there...
It wouldn't be my 1st choice for a hog but for $100aud Vs $300 new it's hard to pass on.
I read they have a serial number behind the battery sticker so I'll check but there are a few other give aways. I'll be careful.
Your absolutely right. I mged Vaperz cloud. They're pretty good helping with this stuff.
Yeah i just figured about 40% too. Your sure about that with the hog? I don't know much about the voltmeter model but he's saying its a 3.hmmm....
I'll give it a try, in the meantime, do you know if this is a genuine v3 hog? I have the option to buy it for 1 third it's cost. Seems too good to...
Now says file too big. You'll have to take my word for it. It's as good as any I've seen! Woo-hoo. 1 down, a million to go!
Ha, i noticed that. Had to try and keep my breathing regular. I was so stoked it was working. Seems 9 inches of decore isn't enough for 6 inches...
Fair enough. Where i live in Australia there's only 1,or 2 people that sell hand made coils. And aliens sell for around $20 us per pair. I just...