Become a Patron!

amps

  1. Shinyobjects

    Time for Pulse Discharge!

    Disclaimer: Please no one try what I'm about to describe. While it may be listed as safe on a website, I know enough to know that this is pushing the limits much further than they need be pushed. I just don't want to get anyone killed... Hey guys, Quick question for anyone who may happen to...
  2. A

    Batteries and amps question

    My ohms is .12 requiring 35 amps. My mod takes two 18650s I have samsung 25r 2500mah 20amp. With both of these in my mod is it safely giving 35 amps?
  3. C

    Help with building coils and safeties

    I have a voopoo drag with the gene chip in it. I recently purchased a rda and a kit along with wire and cotton. I have researched ohm law and looked at coil building calculators. I have two 18650 batteries with 20 continuous and 30 pulse amps. they are both 3.7 volts. I'm confused as to since i...
  4. Youngvapor

    Voltage or Amps

    Ok guys, so i know how steam engine works. All i wonder is, will more voltage take more power of the battery or amps? My build right now is .18 ohm and it sucks out the batteries. Its a 4 battery mod guys, so i have a capacity of atleast 16 volts and 80 amps.
  5. F

    Can I run dual Samsung 25rs at super low ohm?

    I've tried reading many battery articles across the web, and see stuff like continuous capacity, amps, capacity, safety, etc. But I don't feel like I really understand it in practice. So I'll just come out and ask: I'm using two Samsung 25r batteries in a Predator mod. I use an RTA with...
  6. PwnStar51

    4 Battery mods and different mAh/currents

    Hey all, I recently got a Snowwolf 365 and got 4 batteries at that time. 3 of them a E-SYB 18650 3.7V 3500mAh with a 30A discharge current, and one is an E-SYB 18650 3.7V 2800mAh with a 49A discharge current. My question is; is it safe to use all 4 together or would that damage my mod myself in...
  7. B

    Trying to find a clear answer for a change! Otherwise I'm going back to Marlboro's immediately! :'(

    In need of serious help before I say f*** all of this and go back to cigarettes. I have the Sigelei 90w plus mod with a single 26550 / 4200mAh / 40A / 3.7V battery. It came with an Ares tank, which I liked for it's simplicity. But as they don't make it anymore, I did some research and ordered...
  8. MSalmanKhan

    Need help, new coil, battery safety information needed

    Hello, I have a 3 battery regulated mod (Smok Koopor Primus 300W) with TFV8 RBA section. I'm going to use 2 coils in the RBA. The resistance of one coil is 0.23 ohms so two coils will give 0.11 ohms. I'll be using 3 Samsung 25INR 20a batteries with this build. Battery specs are...
  9. V

    Resistance Variations: Effect's on battery drain rate (regulated mod)

    I've heard and seen supporting evidence of two opposing theories on whether or not battery life is conserved at low resistance and in an opposing theory that low resistance correlates to faster battery drainage. From my interpretation of Ohms law V=I*R in conjunction with P=(V^2)/R or P=I*V...
  10. KingClouds

    My battery limit? WHAT LOL

    Okay so I just got the smok h priv (reg box mod) and i put a rda on it, so I use two 18650 batteries 20 amps each. Im just confused on how to stay within the amp limits, could someone please help me better understand? Since I have two batteries does that make it 40 amps all together?
  11. damndirtyvapes

    RX200S amp reading/limit

    Can anyone tell me if the RX200S limits the amps drawn from the coil the way the Cuboid does? I.e., the Cuboid has a coil amp readout on screen and won't fire if the amp draw is greater than 25A. This is stupid, since it's not how regulated mods work. But what are you going to do. Does the...
  12. zdawk

    Why aren't we building within the limits?

    OK, so in the last couple days, I've learned a lot about building with in your limits in concern to mech mods, particularly tube mech mods. I guess I just don't understand why I see so many sub .2 ohm builds on tube mechs if its unsafe. Why not use a parallel mech mod to safely get down to .1...
  13. Ethangon

    Ohms Amps Watts Volts

    First and foremost, I apologize if there is a previous thread explaining this well. I understand how electronic cigarettes work, and i've familiarized myself with each part. I just can't seem to understand the relationship between Ohms, Amps, Watts, and Volts. I recently ordered some parts from...
  14. robbh47

    battery problems HELP

    So I'm a nooby, I apologise in advance as my terminology will probably be all off. I purchased the E-leaf Istick 100watt and I'm planning on a dual tiger coil build in a tugboat RDA. However I feel the batteries I bought may not be safe, I NEED HELP. The batteries are 18650 li ion and have...
  15. B

    need help with a battery question

    i ordered kanger's new topbox nano in a holiday bundle a few days back that came with 1 Kanger Topbox Nano 60w TC Starter Kit 1 5 pack of 0.5ohm Kanger SSOCC Replacement Coils 2 LG HG2 18650 20A 3000mAh Battery 1 Nitecore i2 Battery Charger (2-Bay) 1 Vape Combo Pack (5 Flavors - 15mL Bottles)...
  16. tomasaki

    About variable mods and amps.

    Hey guys! I'm fairly new to vaping, i have an Evic Vtc Mini mod and a clone Velocity Mini. I'm using samsung batteries (smurf and grinch). I'm vaping a dual clapton coil on my velocity mini, reading 0.20 ohms and 13.0-13.5 amps on 36watts on my Evic. I have 3 questions: 1) I read that smurfs...
  17. Cloud

    Batteries

    What is the best and safest battery that will heat up my coil faster. I'm using a vtc 4 on this .16 build but I feel the ramp up time is to slow. Any suggestions on better amp batteries.

VU Sponsors

Top