Become a Patron!

stainless steel

  1. GodFamilyGunsVape

    Atty/Builder Stands, Panels, Drip Tips, Cloudy Artwork

    If you guys are collectors, builders or just normal folks that like your vape gear to look good,, and pleasing to the eyes. I have custom built some atty/builder stands, most all of them are made out of stabwood (wood that has been stabilized) Resin that is pearlescent, metallic, opique...
  2. V

    Stainless steel GAUGE parallel COIL

    Hey guys! I've been searching a lot and i decided to use stainless steel material to create my own COIL (stainless steel GAUGE parallel). I know that there exist other materials such that kanthal a1 or nichrome 80,90. The problem is that i found different types of wires related to this material...
  3. 3Avape Official

    Vapesoon 810 Resin & SS Drip Tip $1.65

    Kindly note that the Vapesoon 810 Resin & SS Drip Tip will be shipped out in random color. Parameters: Type: 810 Drip Tip Material: Resin & Stainless steel Package includes: 1x Vapesoon 810 Resin & SS Drip Tip
  4. Archeria

    30mm inner diameter beauty ring... do these exist?

    Hi There! I'm looking for a beauty ring for my Steam Crave Aromamizer Plus. I've been all over the internet looking for one and the largest I can find is 26mm. I need 30mm on the inside not the outside. I would like it to be either gunmetal or silver if at all possible but at this point I...
  5. Wu-Tangcl

    Experience with Notch Coils?

    Is there anyone here who has experience with Notch coils? They are mostly Stainless steel and i am wondering about these. I haven't tried them yet hence the question. To me they look awesome for TCR Please share your thoughts and experiences if any.
  6. B

    SS316L 26g Tempcontrol combusted briefly

    Hello I just built a SS316L build for my first time and i did a 8wrap 26G dual coil build that ohmed out at .25. Just simple round wire. I set it up in my ohmmeter and pulse-fired until it glow evenly, this is the only "dry burning" i did. After that i put it on my Sigelei Reuleaux 250w that i...
  7. B

    Which wire to buy for claptoning and normal builds

    So, I have a Voopoo Drag and a Vgod TTP Clone, and I would like to start claptoning normally (I did a clapton, but the ramp up was horrible, it was a 26/28 ss316 build...). So, I thought I will buy some ss wire for the core and kanthal for the clapton (because it's cheaper xD), and I don't know...
  8. F

    Cleaning coils and wire changes/oxidation - what's the authority?

    I use SS316L in my RTAs. I think it's got the best flavor and best health rating according to this board. One of my RTAs has 3.5mm coils (why don't people use larger coil diameters like this, btw?) and the other has 2.5mm coils. The main one I vape is at 0.11 ohms, at 125 watts with a 150% 1s...
  9. Enrocc

    FUSED CLAPTON SPECIALS! 21'+ quad core ss - $55, 10'+ tri-core ss - $25, 5'6" tri-core ni80 - $15!

    Hello! I love making wire and I do it well. Custom orders are welcome! Triple or quad core? Yeah!! Stainless steel? You got it!! I also make perfect coils to specs--diameter, ohms, clouds, flavor--you name it and name your price and I'll make it right now! Message me here or email me at...
  10. VapeMate

    Some wire safety questions

    Hello community, i've been looking around for builds in youtube when i saw an interesting title, wire safety! i knew some things about nichrome but i didn't know a thing about different grades of nichrome after watching that video, i started to research and study more but i wasn't so happy after...
  11. L

    Can't stop subohming?!

    Whats up guys, i've had a lot of problems lately with ohms being too low on more complex builds, not sure where the problem.. The most recent was a build tonight, I have 2 pieces of claptoned 28g SS/32g Ni80, and one strand of fused clapton 26g SS/3g NI80 I then wound the three cores (4 pieces...
  12. K

    SS Atomizer Head

    Is there a rule of thumb for stainless steel temp control settings? What's the highest temp safest to vape?
  13. PhantomOp

    Wire -- Quality -- Sources

    I keep running across a bunch of threads where people are asking about the good wire / best wire to use for coil building. Now we have a "sticky" thread that will be updated with the wire suppliers and opinions of quality. Advanced Vape Supply Good quality wire, clean, no complaints SS316L...
  14. Flurry24

    Stainless steel taste

    So I have been using kanthol Clapton coils regularly and I just built with stainless steel for the first time... it was firing great but it tastes like garbage, is this normal???
  15. stevenbuker12

    Trade Black or SS goon for brass goon

    Does anyone have a brass goon or any nice brass attys they would trade for a goon? Got a brass switch and want something nice brass to matchy matchy. Let me know! Maybe a Kennedy or fuel or TM2
  16. R

    Rita Vapes! review: Coil Master SEB stainless steel bottle

    Rita Vapes! review: Coil Master SEB stainless steel bottle
  17. skt239

    Vape Forward Stout

    Hello all, hope everyone is well. So, I will most likely have a Vape Forward Stout coming some time next week and was looking for feedback from some of the owners here on the forum. I've done some reading and watched a couple videos (best one is P. Busardo's for anyone interested) and now want...
  18. W

    Problem with SS coils in TC mode (TobBox Mini)

    Hello guys, So first Of all Im new to vaping. I got my first mod (Topbox Mini) a couple weeks ago and I've been vaping in TC mode with a Nickel coil at about 450-480 degrees fahrenheit. Today I decided to change my coil as my juice was apparently dissapearing so I put this new SS coil that came...
  19. skt239

    TC Pre-set Question

    Hello all, I had a question about TC settings that come pre-programmed on mods like the RX200, Evic, or any mod with a TC pre-set. Does the mod just use a TCR value in the setting or is it done some other way? I ask because on my RX and Evic the vape using the TCR setting for SS is very weak...
  20. culvre

    SS 316L TCR values on Evic VTC mini?

    I'm going to be getting some SS 316L wire for my Bellus RTA soon. So first off, will that work in the SS316 mode on the Evic mini? If so, it would negate the second question I have... Second, if it won't work, how do I set the TCR values in the mod so it will work? I'm sick of the delicate...
  21. patorpw

    To TC or not to TC

    I count myself as an experienced vaper for 3 years plus now. Plenty of experience with mods and building coils and all that good stuff. I've always stuck with kanthal up to now for my ADVs. I've dabbled with Nichrome 80 when the fancy has taken me but I've always steered away from TC coils...
  22. kennykoils

    316l hard on cells?

    I was told on a Facebook group that running 316L coils on mechs is hard on the cells in some way, is there any merit to this or is buddy blowing hot air?
  23. Dannyboy928

    Kangertech SSOCC 0.5ohm coils...need some advice please...

    Hey, I usually use a TFV4 on a SMOK X-CUBE II, but about a week ago my tank smashed while I was working, so the only thing available to purchase close to being capable that kind of wattage in the neighbourhood was a Kangertech NEBOX. (It was going to be my next mod until I heard about leaking...
  24. jasondberman

    Sub-Ohm RTA help please

    I'm pretty new to the vape scene and have been doing some research, and I want to get a RTA build and use 316 stainless steel wiring with organic japanese cotton. Just wondering what ohm I should be shooting for with an ohm reader? I currently have the evic vtc mini with .5ohm ti coils. I've...
  25. S

    Temperature Control with Kanger SSOCC Coils

    Hi Everyone, I've ordered a Joyetech evic VTC mini for tc with stainless steel (having been put off Ni). Has anyone tried tc with Kanger's new SSOCC coils? From what I've read the VTC mini tc (with firmware update) is set up for 304 stainless which is what the SSOCC uses for the wire so it...

VU Sponsors

Top