Become a Patron!

wattage

  1. Zipur

    My mod limits my wattage (why?)

    I went on this page https://www.steam-engine.org/modrange.html and what I got from it is that the max voltage for my mod is limiting my wattage? I am using the Eleaf iStick TC100W, which actually goes to 120W. The coil I am using can go to 160W. But my mod limits me to 75W. What is the problem...
  2. F

    Does low wattage waping destroy batteries on dual battery mods?

    A couple persons told me that if I constantly wape around 15-30w (which I constantly do),it will destroy my batteries,because the low "performance" , I use a pico dual 200W box mod. Is this true?
  3. L

    How to use wattage controls and airflow openings?

    Hello! I recently put my hands on the Aspire Zelos 50W kit and so far I'm really glad with it. I like to use it at 18W with 2 or 3 airholes fully open. 2 days ago I got continuous dry hits and I don't really know why. I'm using the .7 coil and I have to refill 2-3 times a day although I don't...
  4. D

    suggestions on best triple 18650 mods?

    so looking online is literally the worst due to all the ad's, and clones, etc. im looking for a nice 3 battery mod that i can run in the 100-150 watt range regulary. im building .19 coils currently and like them quite a bit, (i would never run my tank atty's at that, they just can't handle it)...
  5. F

    Ni200 0.15 ohm coil: temperature and wattage question

    Hi there, Usually I vape on ijoy 5s RDTA tanks (love them) but now I decided to try temperature control for the first time with my uwell crown and a Ni200 0.15 ohm coil. I am using a tesla 200W WYE mod (had issues with it, would not recommend it). The thing is I don't understand well how all...
  6. P

    0.11 ohm HELP!

    Hey,i have a SMOK MAG with a DROP rda with 2 alien clapton coil,those came to 0.11 ohm,im pretty new at vaping and just dont want to burn my face,what is a decent wattage for that setting because im having problems finding out!!!
  7. M

    is is safe to vape at 6volts? o.o Help i dont get this please.

    im gonna be getting a mini volt mod kit. it comes with a 0.8ohms coil and the maximum wattage is 40w. if i vape it at around 25 to 30w ill be vaping it at around 4.3v to 5v or so. but what happens if i vape it at 40w with the 0.8ohms coil? will it taste burned? could it explode? is it...
  8. Tintin

    How to calculate coil resistance and wattage

    Hello, Im not very experienced with building coil and calculating everything, therefore im asking here for guidance, so im gonna use this coil with 0.05 resistance and i got 2 batteries(40A pulse and 32A continuous) and 3.7V batt, thats almost everything i need to know, but im curious what watt...
  9. P

    New to Vaping - Wattage For Kaos Spectrum?

    My friend recently got me a used Kaos Spectrum 230w and I am new to vaping. I have an Eleaf Sextuple 0.17Ω tank, that I believe has kanthal coils - also told by a different forum that I should use the POWER mode for kanthal coils? Can someone confirm this and tell me what wattage I should be...
  10. W

    Help with Ijoy RDTA 200W SS Coils. Watts and Temperature

    Hi. I have looked on the site a lot and found lots useful. So I decided to join to ask something I couldn't quite find in a search. I'll give as much info a possible so someone can help as best they can. .. I have an Ijoy RDTA 200W Box Mod .. Batteries - Dual Samsung 30q and dual Sony VTC5's...
  11. Baba Fats

    Max output?

    Normally I vape around 40-55 watts. All of my current mods can easily do that. But I'm starting to get annoyed with the finish on my x cube ultra. The paint is fine. But it is really slippery. I was looking at mods that have slightly rubberized finishes, or wraps. I don't really need 200...
  12. M

    Joytech Cuboid w/ uwell crown III .25 - general questions

    Hello there, I'm new here and wouldn't describe myself as very experienced with vaping. So when I use some terms wrongly feel free to correct me ^^ Recently I picked up my 1st set up as mentioned in the title I'm using a mod from Joytech , the cuboid 150W, on top of that i put a uwell 3 crown...
  13. D

    What wattage and voltage should i use with 1.09 ohm?

    i have a Joyetech eVic-VT (not mini) with the tank that comes with it. My atomizer is at 1.09 ohm
  14. B

    Kit Upgrade

    I'd like to "upgrade" my setup by buying a new mod. I have a Smok BEC Pro, and it have a bit low wattage for my needs... I was looking around and found two mods, but I can't choose between them. The first was the Eleaf Istick QC 200W ($37.48) with internal battery, the second is the Joyetech...
  15. C

    Vape Science & confusion: Is there a variable missing in Ohm’s law for proper vaping?

    On all vaping websites, they talk about Ohm’s law and the simple P=V^2/R so lower resistances generate higher powers and therefore we will need to vape that lower resistance coil at a higher power. Simple. So why do some people vape a 0.1 ohm coil at 75W and if they increase the wattage it...
  16. C

    new coil builder needs help

    so i just started building my own coils a few weeks ago and went from a single coil rda to a dual coil rda, and was wondering if for example i usually run my fused clapton as a single at 50w should i be running 2 at 100w to get the same performance out of each coil or will it perform the same at...
  17. J

    Help with ohms and what this can handle so i dont explode!!!

    Okay so I just ordered the brand new smok gx350 and ive never had that much wattage before that shits insane regardless I need to know what sub ohm tank to pick up until the TFV12 is released that can handle the wattage. Also if I were to run an RBA how does that even work I can build them and...
  18. Raiane

    Learning about Wattage - Beginner HELP

    Hi there! I'm a beginner on Vapes - actually I've start to used it for a few months ago. My first device was an eLeaf, iJust Start. Currently I did an upgrade to Innokin Cool Fire IV Storm Edition and I was using the pre-made coils wich came with, 0.5 ohms to use between 20-35wats. Now I have...
  19. cloudking666

    Low Wattage RTA/RDTA/RDA Builds

    I am not sure if there is already a thread on this but here it goes. if so can someone direct me please. I am looking for build that is designed for low wattage, like 25 watts, maybe even lower. my reason is I want a build that will lengthen my battery life, so I can run something at like 25...
  20. S

    Tank Advise (bc vape shop employees suck)

    Ok, so I'm fairly new to vaping and started to quit smoking. So far, so good, 8 days without cigarettes! I'm looking for advise on tanks because when I bought my mods and tanks I knew nothing about the world of vaping or hardware. I bought a VapeForward Vape Flask 100w and a Uwell...
  21. Synphul

    Coil too hot?

    Hey folks, so I've been playing around with my coil builds the past several times testing different things out. Currently the only wire I have is 28ga 316L ss but I've tried with both single strands, twisted strands etc. I've tried spacing the wraps out, I've tried squeezing them together like a...
  22. Marine3313

    Will turning up watts help bring out flavor?

    Ok so I'm using Dovpo e-lvt 30w with kanger sub mini. I'm at 17w but flavor is not there like when I drip it on the RTA version of the tank. Do I need to turn up the watts?
  23. Chris'sClouds

    Voltage vs. Wattage

    I am going to try and build a "Super Vape" and can't decide weather I should have .01 ohms @ 1232.1 watts (11.1V) or 1.2 ohms @ 940.8 (33.6V). Should I go high voltage for power? Or go subohm with high watts?
  24. R

    Is this safe?

    So I'm looking to use a Turnigy 2.2 (2200mAh, 20C, 44 M.C.D., 11.1V) 3s Lipo to power a DNA 200 chip with a .2 ohm coiled tank. 11.1V /.2 Ohms = an actual discharge of 55 Amps, which exceeds my maximum discharge rating of 44 amps. Does the DNA 200 automatically protect itself? I know that I...
  25. Norwegian vaper

    Vaping in Norway

    Just wanted to say hi to forum-members and introduce myself to you guys. As you probably found out by my username and post, i'm from Norway. The laws on vaping are really screwed up in my country, it is allowed to own and use a mod, but selling ejuice with nicotine is illegal but luckily i have...
  26. Devlin.0049

    Burnt Taste at Low Wattage

    So I just got the Xcube 2 and Smok TFV4. Love it for the most part, but I'm having a burnt coil issue at high wattage. I'm using the quad coil right now, which is supposed to go up to 120W, but I have friends that say they take it up to 200 with no problem. So I'm wondering why I start to get a...
  27. Matty102

    Sub-ohm tanks?

    I'm back!! Lol!! I was just wondering if all tanks get hot? Is there one out there that doesn't get hot? I like a warm vape and my eVic VT is at 11.5 watts, using a nautilus with the new Clapton 1.8 coils. Thank y'all!!
  28. Kiss the Sky

    60W battery - red ring kangertech - how high should I "watt"

    I find 25 to 30 watts is great. I am using the SSOCC coil with the red ring. Can I go higher, or do I burn the coil? Thanks!
  29. K

    Please help. I'm confused

    Hi, so first off I'm new here! Nice to meet you! So here's the issue I'm having; I bought a Project Sub ohm "Briefcase" mod a few months back. Worked fine for a couple months then when I would set my wattage (which was usually around 30 watts firing a .25 ohm Project Sub ohm Saucecode) my...

VU Sponsors

Top