watts

My friend recently got me a used Kaos Spectrum 230w and I am new to vaping. I have an Eleaf Sextuple 0.17Ω tank, that I believe has kanthal coils - also told by a different forum that I should use the POWER mode for kanthal coils? Can someone confirm this and tell me what wattage I should be...

I went and bought the Wismec Reuleaux RX200S with the Griffin 25 RTA tank. I built dual coils with 26 ga SS 316L using my fancy new coil master, .40 ohms. I'm still not 100% sure how my watts and voltage should be set.

In need of serious help before I say f*** all of this and go back to cigarettes. I have the Sigelei 90w plus mod with a single 26550 / 4200mAh / 40A / 3.7V battery. It came with an Ares tank, which I liked for it's simplicity. But as they don't make it anymore, I did some research and ordered...

Hello, I have a 3 battery regulated mod (Smok Koopor Primus 300W) with TFV8 RBA section. I'm going to use 2 coils in the RBA. The resistance of one coil is 0.23 ohms so two coils will give 0.11 ohms. I'll be using 3 Samsung 25INR 20a batteries with this build. Battery specs are...

Hello All, I have a Kbox 200 with a mutationx v2 with a dual coil setup. I wrapped 32g hanthal clapton wire 5.6 times on a 2.5 mm coiler. My ohms are reading at .23 on my kbox display. My batteries are samsung-25R. What is the maximum wattage I should use in order safe? I am a bit of a RDA/RBA...

am I doing wrong? I am still getting juice in the stem and drip tip. I have tried everything. I'm using a crown tank now, and still the same thing. I don't like the juice in my mouth. My mod is the eleaf aster, and I am running it at 42.2 Watts. Does it need to be higher? I have my eleaf istick...

I am obsessed with my GPIII but broke my glass on my TFV4. It was working amazing - but i decided to get a larger tank to hold more juice and because the micros coils are harder to find. My GPIII only goes to 75 watts - but it tastes burnt after one day. Anyone know if the GPIII can handle the...

I've been trying to look at various charts to determine appropriate coil builds and wattage settings. So far I'm only confused by it so hopefully someone can help straighten me out. Many voltage/ohm charts are like this one linked off Phil Busardo's site...

I just built my first coil in my cubis RBA it is reading at 1.30 ohms I used 26 gauge wire I think 7 or 8 wraps. I am getting a great vape at 40 watts/7.21 volts. Is this ok or am I running it to high?

What pre built coils should I use and at what setting? I have a .2 dual head coil in my Heracles Plus tank and at 78 watts she's a dream!!! I tried putting a zeypher v2 tank on but don't really know what coil and watts I should use? Are there better flavor pre built coils for the Herk plus tank...

First and foremost, I apologize if there is a previous thread explaining this well. I understand how electronic cigarettes work, and i've familiarized myself with each part. I just can't seem to understand the relationship between Ohms, Amps, Watts, and Volts. I recently ordered some parts from...

Hey everyone, I am knew to mods. I have used pens and a simple mech mod but just upgraded to a Sigelei Fuchai 200w. I am also using a Orchid RBA. I am not too knowledgeable on the tank, just that it is a dual coil and is showing .8 ohms. I am using these INR18650 batteries...

Hey guys! I'm still fairly new to the vaping world. Although im quite eductated on basics, s uch as juices, RDA's, mod types, etc. the advanced things are still confusing. However, that's not why I'm here. My best friend gave me his IPV Mini II box mod and another friend just gave me a Mad...

Hey guys! I'm still fairly new to the vaping world. Although im quite eductated on basics, s uch as juices, RDA's, mod types, etc. the advanced things are still confusing. However, that's not why I'm here. My best friend gave me his IPV Mini II box mod and another friend just gave me a Mad...

I usually get .5 ohm coils but was mistakenly given .25 ohm. I just want to make sure it is safe to use with a 40 watt battery. I don't use high wattage or anything. Usually only around 25 watts.

Hello so I recently purchased an iPV D2. I had built a .35-4 ohm coil and I'm using 18650 batteries of course. It does not allow me to vape over 30w, maybe I can get away with 32watts but then it tells me "Check battery" indicating the voltage is more than 3.6. So from what I'm understanding I...

Hey everyone, New to the site, pretty new to vaping in general, and very new to coil building and drip tanks (built my first coils yesterday). So right now I'm working on upgrading from what I have set up. Though I am very satisfied with the amount of clouds I am getting and how good the flavor...