$34.9 SMOKTech SMOK Fetch Pro 80W 18650 Pod Kit

Discussion in '2Fdeal' started by Jane_Qiu, Jan 7, 2020.

  1. Jane_Qiu

    Jane_Qiu Silver Contributor Member For 3 Years Unlisted Vendor

    Blog Posts:
    0
    Joined:
    Nov 17, 2016
    Messages:
    1,266
    $34.9 SMOKTech SMOK Fetch Pro 80W VW 18650 Mod Pod System Vape Starter Kit 4.3ml
    [​IMG][​IMG][​IMG][​IMG]
    Features
    Battery Type: 1 x 18650 Battery (Not Included)
    Output Wattage: 5~80W
    Output Mode: Watt
    Input Voltage: 3.3~4.2V
    Output Voltage: 0.5~4.0V
    Standby Current: < 200uA
    Charger Output: 5V / 2A
    Charging Voltage: 5V
    Charging Port: Type-C
    Resistance Range: 0.1~2.5ohm
    Coil Resistance: RPM 0.4ohm Mesh Coil (25W) ; RGC 1.7ohm Conical Mesh Coil (40~80W)
    Screen: 0.96" Screen
    Pod Types: Fetch Pro RPM Pod (RPM Mesh 0.4ohm Coil Pre-installed); Fetch Pro RGC Pod (RGC Conical Mesh 0.17ohm Coil Powered by nexMesh Pre-installed)
    Pod Capacity: 4.3ml / 4.0ml(Standard Edition)
    Refill Way: Side refill
    Beautiful and stylish appearance, full of texture and gloss
    Powered by single 18650 battery with max 80W output
    SMOK's first pod mod with USB TYPE-C
    0.96" TFT Display Screen
    The brand new user interface and the core processing unit
    Large Side Firing Bar Button
    Standard 510 Delrin Drip Tip
    Two pods to choose from (Fetch Pro RPM Pod and Fetch Pro RGC Pod)
    4.3ml large capacity juice storage
    Breakthrough Pod - bottom airflow adjustable
    Dual-channel direct airflow design
    Magnetic connection, perfect matching
    Intelligent atomizer recognition
    Puff monitoring system
    10s cut-off
    Short circuit protection
    Over-heating protection
    Low-battery warning


    $25 asMODus ANANI 24mm MTL RTA
    [​IMG][​IMG][​IMG][​IMG]
    Features
    Material: Stainless Steel
    E-juice Capacity: 5.3ml
    Thread: 510
    Two post build deck
    Comes with 5.3ml deep juice and gold plated grub screws, gold plated squonk
    Top airflow design, leak-free
    There are also wide bore Goon-style 810 drip tip and squonk pin
    Can be used as a squonker RTA for bottom feeding devices



    ULTON Hellfire Squonk Box w/ Shift Batch 2 Style 316SS 22mm RDA w/ Extra Transparent Cap Kit
    [​IMG][​IMG][​IMG][​IMG]

    Features
    Shift batch v2 RDA:
    510 threading;
    22mm diameter;
    Adjustable airflow;
    Extra transparent cap included
    Hellfire style squnk box mod:
    510 connection;
    Hybrid connection;
    7ml capacity;
    Fire on: LED red and LED Blue power on;
    No atom: Fast led Blue flashing;
    3 Click: ON/ OFF(flashing alternately led for 3 times);
    5 Click: Stealth mode (with fire active, led off);
    Short protection: Fast LED flashing;
    Low battery warning;
    Cut-off protection;
    Puff time protection;
    Reverse battery protection


    $14.59 Vauban Style 316SS 22mm RDA

    [​IMG][​IMG][​IMG][​IMG]
    Features
    510 threading connection;
    Outer diameter: 22mm
    Comes with BF / Bottom Feeder Pin / Squonker / Squonk Pin;
    Interchangeable air ducts inserts (6 configurations mono / double airflow) + fine adjustment;
    Integrated drip tip and compatibility with standard 510 drip tips;
    Comes with interchangeable air duct insert:
    2 x Ultem air duct inserts (open draw): 2.90mm x 3.90mm
    2 x Ultem air duct inserts (restricted draw): 1.80mm x 3.90mm
    2 x Ultem air duct inserts (tight draw): 2 x 1.3mm (diameter)
     

Share This Page

Close This Message