Hi Vaping Underground members, In this review i take a look at the Bunker BF RDA from Asmodus. The Bunker BF RDA was supplied for the purpose of this review by Saly from Asmodus.
https://www.asmodus.com/collections/atom...a-atomizer
Introduction
Asmodus, who brought us the minikin are an affordable high end American Manufacturer. The Bunker BF RDA is a single coil RDA which features a deck which allows for the fitting of large coils and post design that makes it super easy to build on. The Bunker also features viewing windows which work very well when using in BF mode letting you see when you need to squonk and stopping you being over zealous. The Bunker has bottom to side airflow and gives a ton of air while it's very low height and narrow bore (related to a 810) still gives it encouragement to produce good flavour (very surprised just how good). Finally the locking top-cap moves on a short track to allow full airflow adjustability, so let's give it a look!
___________________________________________________________________
In The Box
Contents:
1x Bunker Squonk RDA
2x Hex Tool; 1 for building purposes, 1 for 510 conversion
1x Extra glass replacement
1x Regular 510 pin
1x Spare parts pack
1x User Manual
___________________________________________________________________
Aesthetics
The Bunker BF RDA came in unique can style packaging with viewing lid with product clearly labelled and the Asmodus logo, very nice packaging! I received the Gold version, it's also available in Blue, Black, Purple, Rainbow, Rose Golden and Stainless Steel, some rather nice colour options available and all come fitted with a Black delrin 810 drip tip. The top cap is a narrow section that tapers in and has some machined knurling for grip. The dual cyclops airflow inlets are on the sleeve which also has the Asmodus logo carved into the metal front and back. The sides of the sleeve has large cutouts that reveals glass viewing windows which gives the Bunker in my view an Aesthetic edge over plain looking RDA's and finally you can see the sleeve is sitting on a shelf belonging to the base. The base has printed branding and safety marks, it comes pre-installed with a Gold plated BF pin which barely protrudes and as the official name of the RDA is the Bunker BF RDA i have no issues with the BF pin being pre-installed. The build quality is very good with thick metal used throughout giving this very short RDA a bit of weight.
___________________________________________________________________
Bunker Specs and Features:
24.5mm Diameter
High grade stainless steel build
Glass window to view build and cotton
Flavor boosting delrin drip tip
Locking outer barrel
Notches assists on removal RDA
24k Plated grub screws
Glass window protection
Adjustable bottom airflow
Regular pin and BF pin included
Thread: 510
Colours: Black, Blue, Gold, Purple, Rainbow, Rose Golden, Stainless Steel
___________________________________________________________________
It's Various Parts
Up top we start with a delrin drip tip which has o-rings fitted so goon style 810's will not fit which is a con but as more and more atty's are being released with this style of 810 fitting not quite the con it once was. The drip tip has a wide bore at the mouth opening but tapers in quite sharply to give quite a narrow bore where it fits to the RDA. The top cap is a very narrow section which only real function is removing it allows you to pop the glass out for cleaning or swapping for the included spare. As mentioned you get a spare glass but the thickness of the metal gives the glass very good protection so you would be unlucky to break it. The sleeve fits over 2 0-rings on the deck and there is 2 notches that fit into tracks, these notches need lining up with the tracks for the sleeve to properly fit all the way down. The fit is tight especially to the top o-ring so you do need to keep the o-rings lubricated else the airflow slot rubbing against mainly the top one will start chewing it up. Finally we have the base section with deck which as mentioned comes installed with the BF pin but a standard pin is included.
___________________________________________________________________
The Airflow
The sleeve has dual cyclops slots for adjusting airflow and when fitting the sleeve their are 2 notches that sit on tracks on the base's shelf that the sleeve sits on. These tracks allow just enough travel for airflow adjustment but then also act as stoppers. The airflow inlets are very low down and line up with the slots on the outside of the base, the air then travels up the hollows in the posts at a steep angle and out aimed at the sides of the coils. The posts are quite high above the floor of the base and the airflow outlets are side rather than bottom airflow so as long as you are not over Zealous with your squonking (you have the viewing windows so should be able to judge) leaking will not be a problem but because the angle from airflow outlets down to the airflow inlets is a steep one if liquid does go into the outlets then it will go straight through the slots and onto your device. The airflow outlets on the posts do not line up with each other perfectly so the airflow will slightly cut across the coils somewhat but how this affects coverage and flavour can't really be told until a build is done and it's vaped.
___________________________________________________________________
The Deck and Build
The deck is coloured Gold with the positive post being Gold plated, each post is mainly occupied with the airflow outlets with the terminal of each post being to one end. The posts are also ramped upwards being lower the opposite ends to the terminals and higher where we slide the coil legs in. Your coil legs just slide in from the side and are tightened down from above, rather than a lip to stop your coil legs popping out while fastening down instead the opening is angled downwards which works the same. The build is so easy as there is so much space and a large exotic coil can easily be fitted. The included coils (you get 2) look to have a 3.0ID diameter and are triple fused claptons 26gax3 +38ga 0.2ohms but no mention of the material used. The coils are Oni coils which do look a bit sketchy when looking through a magnifying glass but i have always actually found they perform much better than they look so used one of them. Once you have your coil fitted just trim your legs and use a coiling rod or something similar to get your coil in the position you want it. Wicking is a doddle, you can leave your cotton ends quite long and no need to thin them out, just stuff them down into the spacious juice well.
___________________________________________________________________
Review Continued Below:
https://www.asmodus.com/collections/atom...a-atomizer
Introduction
Asmodus, who brought us the minikin are an affordable high end American Manufacturer. The Bunker BF RDA is a single coil RDA which features a deck which allows for the fitting of large coils and post design that makes it super easy to build on. The Bunker also features viewing windows which work very well when using in BF mode letting you see when you need to squonk and stopping you being over zealous. The Bunker has bottom to side airflow and gives a ton of air while it's very low height and narrow bore (related to a 810) still gives it encouragement to produce good flavour (very surprised just how good). Finally the locking top-cap moves on a short track to allow full airflow adjustability, so let's give it a look!
___________________________________________________________________
In The Box
Contents:
1x Bunker Squonk RDA
2x Hex Tool; 1 for building purposes, 1 for 510 conversion
1x Extra glass replacement
1x Regular 510 pin
1x Spare parts pack
1x User Manual
___________________________________________________________________
Aesthetics
The Bunker BF RDA came in unique can style packaging with viewing lid with product clearly labelled and the Asmodus logo, very nice packaging! I received the Gold version, it's also available in Blue, Black, Purple, Rainbow, Rose Golden and Stainless Steel, some rather nice colour options available and all come fitted with a Black delrin 810 drip tip. The top cap is a narrow section that tapers in and has some machined knurling for grip. The dual cyclops airflow inlets are on the sleeve which also has the Asmodus logo carved into the metal front and back. The sides of the sleeve has large cutouts that reveals glass viewing windows which gives the Bunker in my view an Aesthetic edge over plain looking RDA's and finally you can see the sleeve is sitting on a shelf belonging to the base. The base has printed branding and safety marks, it comes pre-installed with a Gold plated BF pin which barely protrudes and as the official name of the RDA is the Bunker BF RDA i have no issues with the BF pin being pre-installed. The build quality is very good with thick metal used throughout giving this very short RDA a bit of weight.
___________________________________________________________________
Bunker Specs and Features:
24.5mm Diameter
High grade stainless steel build
Glass window to view build and cotton
Flavor boosting delrin drip tip
Locking outer barrel
Notches assists on removal RDA
24k Plated grub screws
Glass window protection
Adjustable bottom airflow
Regular pin and BF pin included
Thread: 510
Colours: Black, Blue, Gold, Purple, Rainbow, Rose Golden, Stainless Steel
___________________________________________________________________
It's Various Parts
Up top we start with a delrin drip tip which has o-rings fitted so goon style 810's will not fit which is a con but as more and more atty's are being released with this style of 810 fitting not quite the con it once was. The drip tip has a wide bore at the mouth opening but tapers in quite sharply to give quite a narrow bore where it fits to the RDA. The top cap is a very narrow section which only real function is removing it allows you to pop the glass out for cleaning or swapping for the included spare. As mentioned you get a spare glass but the thickness of the metal gives the glass very good protection so you would be unlucky to break it. The sleeve fits over 2 0-rings on the deck and there is 2 notches that fit into tracks, these notches need lining up with the tracks for the sleeve to properly fit all the way down. The fit is tight especially to the top o-ring so you do need to keep the o-rings lubricated else the airflow slot rubbing against mainly the top one will start chewing it up. Finally we have the base section with deck which as mentioned comes installed with the BF pin but a standard pin is included.
___________________________________________________________________
The Airflow
The sleeve has dual cyclops slots for adjusting airflow and when fitting the sleeve their are 2 notches that sit on tracks on the base's shelf that the sleeve sits on. These tracks allow just enough travel for airflow adjustment but then also act as stoppers. The airflow inlets are very low down and line up with the slots on the outside of the base, the air then travels up the hollows in the posts at a steep angle and out aimed at the sides of the coils. The posts are quite high above the floor of the base and the airflow outlets are side rather than bottom airflow so as long as you are not over Zealous with your squonking (you have the viewing windows so should be able to judge) leaking will not be a problem but because the angle from airflow outlets down to the airflow inlets is a steep one if liquid does go into the outlets then it will go straight through the slots and onto your device. The airflow outlets on the posts do not line up with each other perfectly so the airflow will slightly cut across the coils somewhat but how this affects coverage and flavour can't really be told until a build is done and it's vaped.
___________________________________________________________________
The Deck and Build
The deck is coloured Gold with the positive post being Gold plated, each post is mainly occupied with the airflow outlets with the terminal of each post being to one end. The posts are also ramped upwards being lower the opposite ends to the terminals and higher where we slide the coil legs in. Your coil legs just slide in from the side and are tightened down from above, rather than a lip to stop your coil legs popping out while fastening down instead the opening is angled downwards which works the same. The build is so easy as there is so much space and a large exotic coil can easily be fitted. The included coils (you get 2) look to have a 3.0ID diameter and are triple fused claptons 26gax3 +38ga 0.2ohms but no mention of the material used. The coils are Oni coils which do look a bit sketchy when looking through a magnifying glass but i have always actually found they perform much better than they look so used one of them. Once you have your coil fitted just trim your legs and use a coiling rod or something similar to get your coil in the position you want it. Wicking is a doddle, you can leave your cotton ends quite long and no need to thin them out, just stuff them down into the spacious juice well.
___________________________________________________________________
Review Continued Below: