Hey, guys!
Today I would like to introduce you the kit by ASPIRE, which was announced this autumn – ASPIRE Speeder 200W Kit, and, maybe, someone will interested in its functional.
It came to me in a black box with a thin insert.
On the face side we can see the company`s and kit names and the picture of Speeder Kit. On the back side there are different certificates and warnings, contacts, barcode, serial number, company`s logo and set info. As for the last one, it has some bonuses, which will customize the complete atomizer or will help it to work longer.
ASPIRE Speeder box mod is really pleasant for to touch, not really big, is convenient for to hold on and doesn`t slipper thanks to a special matte finish. It`s of a high quality and assembly, without backlashes and gaps. The one moment is, that such a cover grabs fingers.
On the face side there is a not really big black`n`white display, micro USB port and the vertical navigation rocket. At the first blush it`s nor convenient, but I persuade, that you`re mistaken
On the right side there is a decorative insert with the company`s name, which works as a «Fire» button. It has a middle stroke without misfires and backlashes.
I want to point out, that it can be inconvenient for to left-handed people, because, they`ll push it with the part of hand between index and thumb fingers, if want to look at screen.
On the back we can find an insert and sticker with QR-code. I think, that some time later, we`ll find some scratches here.
On the top there is a spring-loaded 510 connector, which`s been made on the opposite to «Fire» button side. This`s made for to avoid button leaks with juice and make the box mod to work longer. You can set atomizers up to 26 mm here, because of round corners.
At the bottom of the device you can see the latch, which holds the batteries compartment cover. It works good and doesn`t prevent the device to stay on the table.
Also, there are some venting hole, but only 2 of them work correct, because of a contact platform inside, which cover 6 of them.
For to turn the device on, you need to push the «Fire» button for 5 times. Then you`ll see the main screen with the most important indices, such as wattage, temperature, current, voltage, the mode name, lock index, resistance and batteries indicator.
For to turn Speeder 200W box mod off – push the «Fire» button for 5 times and then hold it on for some seconds.
If you don`t do that, you`ll only lock all buttons with the following message on the screen.
For to acrtivate/deactivate stealth mode – push «Fire» for 3 times.
If you want to change the mode – push the «Fire» button ant the top side of navigation rocket simultaneously. Then, you will see, that mode name will be underlined and can choose the other one with the help of rocket and activate by «Fire»
For to set the wire type (TC), «M» coefficient (TCR) or «С» coefficient (CPS) – push the «Fire» in the menu of choosing modes and then set Ni, Ti, SS / M1, M2, M3 / C1, C2, C3 parametres.
Today I would like to introduce you the kit by ASPIRE, which was announced this autumn – ASPIRE Speeder 200W Kit, and, maybe, someone will interested in its functional.
It came to me in a black box with a thin insert.
On the face side we can see the company`s and kit names and the picture of Speeder Kit. On the back side there are different certificates and warnings, contacts, barcode, serial number, company`s logo and set info. As for the last one, it has some bonuses, which will customize the complete atomizer or will help it to work longer.
ASPIRE Speeder 200W set:
1 * ASPIRE Speeder box mod;
1 * Athos tank;
1 * Replacement coil head Extra А3;
1 * Replacement coil head Extra A5 (pre-built);
1 * Extra drip tip;
1 * Spare glass tube;
1 * USB cable;
12 * О-rings;
1 * Warning card;
1 * User manual;
1 * Warranty card
1 * ASPIRE Speeder box mod;
1 * Athos tank;
1 * Replacement coil head Extra А3;
1 * Replacement coil head Extra A5 (pre-built);
1 * Extra drip tip;
1 * Spare glass tube;
1 * USB cable;
12 * О-rings;
1 * Warning card;
1 * User manual;
1 * Warranty card
ASPIRE Speeder box mod is really pleasant for to touch, not really big, is convenient for to hold on and doesn`t slipper thanks to a special matte finish. It`s of a high quality and assembly, without backlashes and gaps. The one moment is, that such a cover grabs fingers.
ASPIRE Speeder 200W parametres:
Sizes: 88 mm * 45 mm * 30 mm;
Color: Black, silver, beige + some new`ve been announced
Sizes: 88 mm * 45 mm * 30 mm;
Color: Black, silver, beige + some new`ve been announced
On the face side there is a not really big black`n`white display, micro USB port and the vertical navigation rocket. At the first blush it`s nor convenient, but I persuade, that you`re mistaken
On the right side there is a decorative insert with the company`s name, which works as a «Fire» button. It has a middle stroke without misfires and backlashes.
I want to point out, that it can be inconvenient for to left-handed people, because, they`ll push it with the part of hand between index and thumb fingers, if want to look at screen.
On the back we can find an insert and sticker with QR-code. I think, that some time later, we`ll find some scratches here.
On the top there is a spring-loaded 510 connector, which`s been made on the opposite to «Fire» button side. This`s made for to avoid button leaks with juice and make the box mod to work longer. You can set atomizers up to 26 mm here, because of round corners.
At the bottom of the device you can see the latch, which holds the batteries compartment cover. It works good and doesn`t prevent the device to stay on the table.
Also, there are some venting hole, but only 2 of them work correct, because of a contact platform inside, which cover 6 of them.
For to turn the device on, you need to push the «Fire» button for 5 times. Then you`ll see the main screen with the most important indices, such as wattage, temperature, current, voltage, the mode name, lock index, resistance and batteries indicator.
For to turn Speeder 200W box mod off – push the «Fire» button for 5 times and then hold it on for some seconds.
If you don`t do that, you`ll only lock all buttons with the following message on the screen.
For to acrtivate/deactivate stealth mode – push «Fire» for 3 times.
If you want to change the mode – push the «Fire» button ant the top side of navigation rocket simultaneously. Then, you will see, that mode name will be underlined and can choose the other one with the help of rocket and activate by «Fire»
For to set the wire type (TC), «M» coefficient (TCR) or «С» coefficient (CPS) – push the «Fire» in the menu of choosing modes and then set Ni, Ti, SS / M1, M2, M3 / C1, C2, C3 parametres.
