Axial Pro RDA - Mass Mods x Twisted Messes

Discussion in 'Atomizers' started by timwis, Feb 9, 2020.

  1. timwis

    timwis Gold Contributor Member For 2 Years

    Blog Posts:
    0
    Joined:
    Apr 9, 2017
    Messages:
    2,757
    Hi Vaping Underground members, In this review i take a look at the Axial Pro RDA from Mass Mods and Twisted Messes. The Axial Pro RDA was supplied for the purpose of this review by Mass Mods.

    https://www.massmods.com/products/axial-pro

    [​IMG]

    Introduction

    The Axial Pro RDA is an all American collaboration between Mass Mods and Twisted Messess who bring us a dose of thinking outside the box. The Axial Pro RDA comes with the usual Parallel deck we are accustomed to but also comes with a series deck section which opens up a new option of building for those that prefer modest builds when it comes to resistance but would love to take advantage of all that surface area provided by a more adventurist dual coil build. Only coming in two colours at the time of writing but of high end build quality, let's give the Axial Pro RDA a look!

    ___________________________________________________________________



    In The Box

    [​IMG]

    Contents:

    1 x 25mm Axial Pro cap
    1 x Series Deck
    1 x Parallel Deck
    1 x Delrin 810 drip tip
    1 x frosted 810 drip tip
    1 x frosted 510 adaptor
    Spare O-rings/screws
    2 x BF pins
    Hex tool
    Instruction Manual

    [​IMG]

    ___________________________________________________________________



    Aesthetics

    The Axial Pro RDA comes in cardboard box packaging with everything you receive having it's own compartment on one layer. To date the RDA comes in just 2 colour options which is matte Black or Polished stainless Steel, i received the Stainless Steel version. The sleeve is very clean and stylish while being plain which will appeal to most people. We have an indented band towards the top where the airflow is adjusted, the airflow is outer dual cyclops, but the inner cap can be turned between dual cyclops or dual 3 holes for more smoothness. The drip tip is a very plain medium profile Delrin 810 and moving to the base we have printed safety marks and branding. Finally we can see one screw on the parallel deck and 2 on the series and both come pre-installed with a standard Gold plated pin.

    The build quality of both supplied decks and inner and outer sleeve is high end, it just oozes quality!

    [​IMG][​IMG][​IMG]

    ___________________________________________________________________



    Axial Pro Specs and Features:

    Diameter: 25mm
    Driptip: 810
    Material: Stainless Steel
    Adjustable Airflow
    Comes with both Series and Parallel Decks
    Thread: 510
    Colours: Matte Black, Polished Stainless Steel

    [​IMG][​IMG]

    ___________________________________________________________________



    What You Receive?

    You obviously get the inner and outer sleeve and pre-installed 810 Delrin drip tip, also included is a Frosted 810 and a Frosted 510 adaptor. As already mentioned you receive 2 decks (parallel and Series) but what i like is they are both completed decks with both also having a pre-installed standard 510. Hopefully in the near future just the sleeves will be available so just the purchase of the sleeve (inner and outer) will give you 2 RDA's.

    Also included is plenty of spare o-rings and screws and also 2 BF pins, one for each deck. Unfortunately no coils or cotton is provided and no tools for swapping out the pins. Yes most people will have plenty of screwdrivers and an allen wrench that fits the BF pin and they will also have plenty of cotton and coils but it's hardly the point. This is an expensive RDA so should come with everything needed and that includes cotton and coils to do at least one build!

    ___________________________________________________________________



    Parallel and Series Build Deck

    A series build deck option isn't innovative in it'self and was a thing a while back but to my knowledge it was always the case that the standard parallel deck needed converting into a series which was fiddly and of cause bits can easily be lost.

    Here we have two independent decks which at a quick glance can be told apart by the large Blue neutral block on the series deck, i really like the way colour has been used to help easily identify the two different decks.

    Both decks are so clean looking, it's all about attention to detail and not so much that the series deck option isn't innovative but how simply it has been implemented, sometimes simple can be genius!

    [​IMG][​IMG]

    ___________________________________________________________________



    The Difference Between Parallel and Series Decks

    On a standard dual parallel deck we have two coils that run side by side both having one lead that fixes to a positive post and one lead that fixes to a negative post (ground). When coils are installed this way the resistance is halved.

    On a series deck we have a positive and negative post and then one shared neutral post that links them together. This means one coil has a lead fixed to the positive post while the other coil has a lead fixed to the negative (ground) then both coils has it's remaining lead fixed to the neutral post so both coils become a part of one continuous circuit which means the resistance in doubled.

    [​IMG][​IMG]


    The Maths

    Parallel Dual coil setup: Each coils resistance is 0.20 x 2 coils in parallel = 0.10 resistance

    Series Dual coil setup: Each coils resistance is 0.20 x 2 coils in series = 0.40 resistance.

    [​IMG]

    ___________________________________________________________________



    Review Continued Below:
     
  2. timwis

    timwis Gold Contributor Member For 2 Years

    Blog Posts:
    0
    Joined:
    Apr 9, 2017
    Messages:
    2,757
    Review Continued:

    The Airflow

    The airflow is pretty standard and consists of the outer sleeve having dual cyclops and the inner sleeve having both dual cyclops and dual 3 hole set-up so just turn the top-cap (which is also your inner sleeve section) to choose between which style of airflow you prefer. I can tell you after using the RDA that the 3 holes each side are quite large and although it does smooth the airflow slightly it's minimal as the airflow isn't exactly turbulent with the slots and also any restriction is also very minimal.

    The outer sleeve locks onto the deck with the outer airflow slots centred to the coils but this does mean anything but airflow fully open will not be fully centred.

    Finally the inside of the inner sleeve/top-cap has a conical shape and the airflow will be hitting your coils full on wrapping around and giving good coverage.

    [​IMG]

    ___________________________________________________________________



    The Build

    I built on the Series deck after swapping for a BF pin and the build is done the same as on the standard parallel deck just class your neutral shared post as your negative and both negative and positive as your positive for the sake of doing the build with no confusion.

    The deck gives a lovely wide open build area and has block type posts that lay horizontally on the floor of the deck giving you 4 postless style terminals, just lower your leads in from above and the hex screws (my favourite) get fastened from the sides where we have little arcs cutout of the wall of the deck for easy access.

    I cut my coil leads to 4mm and fastened in place before pulsing, i pulsed before lining my coils up as their is so much room and once i got rid of any hot spots used a coiling rod to get them positioned where i wanted them.

    Wicking is just as simple just cut your cotton ends leaving an reasonable length, fluff your ends up thinning slightly and then tuck down into the wells, that's it!

    [​IMG]

    ___________________________________________________________________



    How She Vaped and My Thoughts!

    First thing even if this RDA didn't come with the serial deck, the deck design it'self is one of the best i have used for it's simplicity, just very well executed. Add to this the flavour it gives, looks and overall build quality then this would be a top notch RDA even without the big talking point, that serial deck!

    What i like about the serial deck is i had a pair of SS 0.3ohm Alien Claptons (thanks Crazy Chef) which i just haven't used and would of eventually split and put them in a single coil RTA. I know using them in a normal parallel dual set-up would to most be very modest but personally i just do not go below 0.2ohms even on a regulated device and prefer builds between 0.4 and 0.6. I don't know what wattage i would of needed to be at with these coils on a parallel deck (definitely would of needed a dual battery regulated device not a single) but the build came out to 0.62ohms on the serial deck and although it's not quite as simple as using very low wattage (normally i would be at between 20W and 25W with 0.6ohm build), just 45W gave me copious clouds and some of the best flavour i have got from an RDA, i am testing some desserts and the Axial Pro loves them.

    It also will allow for much safer builds on mech mods while still using your favourite coils, it's a real winner!

    I did use the 3-hole airflow for what little restriction it gave simply because i wanted the airflow fully open to keep it perfectly centred, it gives plenty of air and it is also very noticeable how cool the sleeve kept.

    The only cons i have are not receiving the tools for swapping the pins and not receiving coils and cotton to me is a big con with any rebuildable. Also to be petty the drip tips are fit for purpose but nothing special so i can see myself putting something better up top! Finally the tolerances on this RDA just couldn't be better and even despite having nothing to grip the airflow adjusts with a smooth movement.

    [​IMG]

    ___________________________________________________________________



    Likes

    High end build quality
    Stylish if plain look
    Simplistic deck designs
    Both Parallel and Serial decks supplied
    Spacious postless style design
    Very easy build and wick
    Allows modest dual builds
    Great flavour
    Smooth airflow
    Tolerances spot on with o-rings
    Sleeve kept very cool
    Plenty of spares
    2 Drip tips
    510 Adaptor


    Cons

    Don't receive coils or cotton
    Don't receive tools to swap pins
    Need fully open airflow to be perfectly centred
    Drip tips ok but not as special as the rest of the RDA

    I would once again like to thank Mass Mods for sending the Axial Pro RDA for the purpose of this review.

    https://www.massmods.com/products/axial-pro

    ___________________________________________________________________
     
  3. Just Frank

    Just Frank Platinum Contributor Member For 3 Years

    Blog Posts:
    0
    Joined:
    Mar 17, 2017
    Messages:
    5,453
    Very good review. Thanks for posting. I didn't understand the decks when I first seen this. I don't think I've ever heard of a series deck before.
     
    timwis likes this.
  4. timwis

    timwis Gold Contributor Member For 2 Years

    Blog Posts:
    0
    Joined:
    Apr 9, 2017
    Messages:
    2,757
    Thanks mate, i haven't noticed anything available for a good while but in the past their was a few RDA's that could be converted between parallel and series decks but this is the first time i know of an RDA coming with both completed decks!
     
    Just Frank likes this.
  5. Just Frank

    Just Frank Platinum Contributor Member For 3 Years

    Blog Posts:
    0
    Joined:
    Mar 17, 2017
    Messages:
    5,453
    Do you think the series decks have super low ohm mech users in mind? I don't know, maybe it can benefit others too..
     
    timwis likes this.
  6. timwis

    timwis Gold Contributor Member For 2 Years

    Blog Posts:
    0
    Joined:
    Apr 9, 2017
    Messages:
    2,757
    Not just them but others that would love to use coils that would normally be too low resistance for their liking but now can use at a more modest wattage and safely. It's strange because normally at 0.62ohm i would be at between 20 to 25W and here i was at 45W but a very comfortable vape but really got the benefit of all that surface area of the coils, the flavour is outstanding! Yet the same coils on a standard parallel deck would of been 0.15 which would of required i guess about 80 to 90W!
     
    Just Frank likes this.
  7. Carambrda

    Carambrda Gold Contributor Member For 3 Years

    Blog Posts:
    0
    Joined:
    Feb 23, 2017
    Messages:
    4,041
    The series deck could also be used on a series mech to prevent it from overpowering this 25mm RDA. Just to give only one example, at a conservative-looking .49 ohms, on the Vaperz Cloud Rulebreaker with three fully charged Samsung 30T batteries in series you're only pulling 24 amps from your 35 amp batteries so then the safety I'd say is pretty excellent, but you're also pushing over 300 watts in just a 25mm RDA so good luck there... whereas if you quadruple the ohms to 1.96 ohms by using the series deck and you use three fully charged Samsung 50E2 batteries in series with this mech, then suddenly you're talking 6.23 amps and 78.5 watts, and, then you also get a fabulous amount of battery life to go with that.
     
    timwis and Just Frank like this.
  8. timwis

    timwis Gold Contributor Member For 2 Years

    Blog Posts:
    0
    Joined:
    Apr 9, 2017
    Messages:
    2,757
    Brilliant contribution, i have always avoided series mechs but yep using an RDA with a series deck makes them sound much less daunting! Thanks for your explanation!
     

Share This Page

Close This Message