1. UP FOR A NEW CHALLENGE? CLICK HERE TO CHECK IT OUT

DNA75C .13 coils?

Discussion in 'Regulated (Voltage / Wattage / 3.7v/ Temp Control)' started by GorGon27, Nov 6, 2018.

  1. GorGon27

    GorGon27 Silver Contributor Member For 2 Years

    Blog Posts:
    0
    Joined:
    Aug 12, 2016
    Messages:
    569
    Specs say .25, cold coil .02. Will it power Falcon M1 coils? Sorry if dumb question don't know. Search brought up everything but.

    Also is 85% efficiency very noticeable coming from DNA250C on Two 18650's? Will be using 5,200MAH 26650. Batteries not an issue carry 12. Might just have answered my own question?

    Thank you
     
  2. PoppaVic

    PoppaVic Silver Contributor Member For 4 Years

    Blog Posts:
    0
    Joined:
    Sep 5, 2014
    Messages:
    1,484
    I fail to see a dissertation or question - jus gibberish.

    My dna200's (hcigar vt133) are running about 0.12Ω - why? Because I suck down short, hard, fast DL "hits". I can get about 2 days per cell-pair.

    I use about 0.2Ω on my ds-style mechanical, and about 1.2Ω on my NC mechanicals. Check ohms law for why.

    Your 26650 can store a billion mAH and still blow because of the draw/load. Learning this shit isn't optional, but I will defend yer right to interpolate the basics to yer death!
     
  3. GorGon27

    GorGon27 Silver Contributor Member For 2 Years

    Blog Posts:
    0
    Joined:
    Aug 12, 2016
    Messages:
    569
    No reason to be mean. I did not know, but just found out. 75C will fire M1 coil up to 60W. Also, 75C is best at about 50W where the efficiency is up at 96%. it Is maxed out at 75 an then only 85%. So cuts a 5200MAH battery to like 4500MAH at 75W. I mean "seemingly" not in science. I got my answer nonetheless. I do not know why you thought it was a stupid Q. I honestly did not know before I order a $450 DNA75C Mod from Vicious Ant. If it were a $35 Mod I would not have bothered asking. I understand this, not stupid. I am well within specs with 40A battery at 50W. One must not know ohms law to vape. although I fully agree they should know some important stuff and I do. this is not a "build". Factory coils. Hardly in the danger zone. I do not know why you took the opportunity to judge me but whatever.
     
    fidola13 likes this.
  4. PoppaVic

    PoppaVic Silver Contributor Member For 4 Years

    Blog Posts:
    0
    Joined:
    Sep 5, 2014
    Messages:
    1,484
    Anyone that orders a $450 mod needs no advice from me. Rock on.

    NEXT?
     
    GorGon27 likes this.

Share This Page

Close This Message