Become a Patron!

Ehpro armor and panther

f1r3b1rd

https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
A2437C82-F933-4632-819B-E7B9C268ABF3.jpeg

This is in no way intended to be a “professional review,” I won this from heavens gifts and was asked to write this. This is simply an account of my experience.

First off, I will say that I do find the mod to be really nice! The mod is an unregulated single battery tube with a side firing button. I found the button to be reminiscent of the old provari, vamo and poldiacs. If you’ve beeen vaping a while, you’ll probably find the same. It also incorporates 2 LED lights: one on either side of the button. Additionally they employ an innokin style of battery monitoring. Green indicates the battery is greater than 70%, yellow 30-70% and red... well, you’ll change the battery before you get that point.
28AC1318-87F7-4161-A2B3-A3D51C7755F8.jpeg

The mod works with 18650, 20700 and 21700 battery profiles. Mine won’t fire below a 0.1 ohm resistance; although, I’ve heard others say that it will go down to a 0.08 ohm. I rarely build that low; but, this one won’t fire it.

Does it hit hard? I hate that question... but it does vape very nice... It’s not as hard as a true Mech like the S0I; but at under 30$ with added safety, you won’t be disappointed with the performance.
I’ve been running it with either a goon2 or petri24. The mod is 25mm in diameter; so, these 24mm attys do look well.
F679168F-B53C-4193-9875-F70B19B50E89.jpeg
896DB0A7-A50D-47CB-AF11-CC0AB99E39B3.jpeg

The panther atty...
To be honest, I don’t like bottom airflow, so this will be jaded from that perspective.

The airflow is more like the freak show than the Kennedy. Where the Kennedy excells in flavor, this excels in cloud production; and, appears to be muting the flavor.

It’s made well, as is the mod. It has gold plated posts, can handle thick wire and has a deep as juice well.

Interestingly, there is a small lip between the airflow and the wall of the atty. This lip appears to be preventing the atty from leaking.
96081467-A9E0-4E99-9116-F234F82F4897.jpeg

As a matching setup they go well together. Again, if you like bottom airflow. I’ll keep mine with the goon.

My favorite part of this mod is the added safety; which, is a plus and a minus, depending on your point of view.


Ehpro armor mod:
https://www.heavengifts.com/product/Ehpro-Armor-Prime-MOD.html


Panther atty:
https://www.heavengifts.com/product/Ehpro-Panther-RDA.html
 
Last edited:

Heartsdelight

VU Donator
Diamond Contributor
Member For 5 Years
Congratulations on your win again! Very nice write up!

Very nice that it allows the use of 3 different batteries! Unregulated but with safeties built in, I like that!
 

VU Sponsors

Top