First Time Building

[Enriks]

Is it okay to build a Dual Coil on RDA Atty with a Single Battery Regulated Vape?
If it's okay then what wire should I use? What Diameter(mm) and how many wraps?
Thanks.

 

[PhantomOp]

Is it okay to build a Dual Coil on RDA Atty with a Single Battery Regulated Vape?

Yes --- Keep the wattage at or below 75W for a single battery MOD.

Here is a good link regarding batteries and MOD usage put together by IMFire3605, one of our forum members.
http://www.vapingunderground.com/th...ons-battery-tables-by-application-use.272640/

If it's okay then what wire should I use? What Diameter(mm) and how many wraps?

Steam-Engine is your friend. It will help you determine what to use.

You didn't specify what wattage your MOD can support or what wattage you usually run at. So I could throw out all kinds of coil setups and some or none would work for you.

So, Here is a simple coil build for a dual coil RDA.

http://www.steam-engine.org/coil.asp?s=dp&r=0.5&awg=26&id=3
26g KA1 | 3mm ID | 7 wraps -- 1.0Ω p/coil or 0.5Ω total for dual coils.

 

[Enriks]

I usually puff at 30w-40w and my device can support up to 75w.
BTW thank you. I think I can do this now with the help of STEAM ENGINE
Thanks Again.

 

[jamezcua12]

Does anybody know any good coild builds with 26ga wire around 0.1 - 0.3ohms

Sent from my SM-G920T using Tapatalk