SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
Did u get a mech pro yet? This mod is solid as fuck and very well built and dirt cheap.
Sent from my SM-G935V using Tapatalk
Become a Patron!
Geekvape Mech Pro
- Thread starter SirRichardRear
- Start date
Sent from my SM-G935V using Tapatalk
Thought about it, but I already have some very good parallels and didn't like the way it breaks down to clean/maintain so I passed.
Sent from my Nexus 6 using Tapatalk
I've just been a lot more selective, got to many already.
Got a MCV Copper Raptor G2 due in tomorrow and the pure Silver upgrade kit ordered
Sent from my Nexus 6 using Tapatalk
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
Fair enough. I'd say it's worth it next time you order a mod though. At the price point it's much better then any clone
Sent from my SM-G935V using Tapatalk
I mean it's not a loss for 18$ imo. Even if you just buy it as a base and switch out ALL the components your still making out great comparably speaking.
Sent from my SM-N920R4 using Tapatalk
I bought it last night, considering the price I couldn't allow myself not to buy it.
Sent from my SM-N920R4 using Tapatalk
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
Do you guys have any good websites to pick one up? Preferably not from china.
Nah, ease of breaking down is a big factor for me and this just doesn't have it.
Sent from my Nexus 6 using Tapatalk
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
I count 7 screws to completely disassemble. you could do that in your sleep
More to it than thatI count 7 screws to completely disassemble. you could do that in your sleep
Also spending my cash on gear like this
That Raptor G2 is sexy...More to it than that
Also spending my cash on gear like this
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
Very sexy setupMore to it than that
Also spending my cash on gear like this
It hits like a series Mod, can't wait until I get the Pure Silver upgrade kit, DAMN!Very sexy setup
All I did was put her in the Ultrasonic and wiped down with a Sunshine Cloth, wait till I get her on the buffer. Might be a bit though cause she Vapes so well I can't put her down, I mean DAMN!
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
I really like my Mech pro, it's definitely a stay at home mod, much to heavy for a carry imo.
Sent from my iPhone using Tapatalk Pro
Sent from my iPhone using Tapatalk Pro
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
I'll have my review up no later then next friday
Got mine yesterday, along with my first RDTA. Really like it so far.
KingPin!
In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
I'll have my review up no later then next friday
Be interested to see what voltage drop you record mate I'll keep an eye out for it
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
LMAO didn't even bother to test it. I guess i could and just let you know. it takes all of 5 seconds
KingPin!
In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
Please as I don't have a volt reader that does both bits
just good to know what I need to calculate for my builds just assuming 4.2V at the moment
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
well voltage drop doesn't include votlage sag. Also don't you have the 521 tab? it measured voltage drop if you have the full size one (not the mini)Please as I don't have a volt reader that does both bits
KingPin!
In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
Yeah don't worry on the sag bit just the drop
Na I've got the Geekvape mini jobby plug it on reads resistence and fires coil only
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
Gotcha. I'll let u knowYeah don't worry on the sag bit just the drop
Na I've got the Geekvape mini jobby plug it on reads resistence and fires coil only
Sent from my SM-G935V using Tapatalk
KingPin!
In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
KingPin!
In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
One of my magnets (the one to left of the batteries) came unstuck today can't have opened the panel more than 10 times FFS what's best thing to use to stick it back in?
Looking at the glue they used underneath doesn't look very strong to me!
Looking at the glue they used underneath doesn't look very strong to me!
KingPin!
In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
Just put some cyanoacrylate on it seems to be holding (loctite general purpose superglue) I'll let you know if it comes off again
1) scrapped off the old crap
2) roughed up the surfaces on back of magnet and plastic
3) then wiped surfaces with vodka applied on an ear bud
4) applied the superglue after it evaporated and let it set for an hour
1) scrapped off the old crap
2) roughed up the surfaces on back of magnet and plastic
3) then wiped surfaces with vodka applied on an ear bud
4) applied the superglue after it evaporated and let it set for an hour
KingPin!
In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
@SirRichardRear does you fire button ever get warm when you engage it? Mine gets pretty warm?
Checked my batteries they are nice and cool and pressed the button down with cover off can't see any arcing in there
Still firing my atty ok I put that on a regulated mod and no issues at all?
Is this just a quirk or something I should be concerned about?
Checked my batteries they are nice and cool and pressed the button down with cover off can't see any arcing in there
Still firing my atty ok I put that on a regulated mod and no issues at all?
Is this just a quirk or something I should be concerned about?
Mine does the same thing every once in awhile, Not very often but occasionally it does get warm. I think it's just not making a good contact. It is a pretty firm button to push.
Sent from my iPhone using Tapatalk Pro
KingPin!
In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
Hmm you might be right there if I don't push it exactly centre I notice it more
I had the same thing happening. Read somewhere if you push hard and keep pushing hard it will stop. It's working for me. Had a similar thing happen with the Geekvape Tsunami tube mod. The button was REAL sticky at first. It took two hands for me to use it, but after pressing it a few hundred times it's fine now. Maybe Geekvape makes their stuff a little too tight in general.
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
KingPin!
In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
Feel better now it's not just me just a quirk said right from the beginning my button feels like it snags on way down though never gets stuck
If I push towards the left and top of the button it won't push down at all
If I push centre, bottom or right it does
If I push towards the left and top of the button it won't push down at all
If I push centre, bottom or right it does
Yeah I took out the batteries and pressed it over and over.
Some beautiful pics guys. Love the looks and beefiness of the mech pro, got one on order super stoked, only my second mech mod ever. Going to be a stay at home mod for chilling and watching movies/videos after work.
It's definitely not a carry around mod in my book. Damn thing is heavy... Lol
Love the mod and it's built solid. Does make a nice home unit.
Sent from my iPhone using Tapatalk Pro
KingPin!
In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
KingPin!
In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
Yeah agree with that don't own a coppervape Squonker, or tesla nano 120w but I imagine it must be about the same weight as those it's solid!
Oh and @CactusFanaticus if you have same problem with the magnet me and SRR had the fix I posted above worked a treat still holding strong
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
Just put up my review
KingPin!
In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
Was it difficult to rig it up to measure the voltage drop mate?
Just one thing to note those vent holes are blocked by the battery sled doesn't actually look like there's any sort of gap for venting to me
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
If it's not air tight (which it isn't) then it'll be able to vent
and no it's actually really easy to test voltage drop lol
KingPin!
In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
If it's not air tight (which it isn't) then it'll be able to vent
and no it's actually really easy to test voltage drop lol
Ahh ok cool on the airvent
How do i do it? Only reason I ask is I don't have the equipment to test it
Recieved my Mech pro today, black, thing looks awesome. Honestly I love everything about it, no major gripes. If I had to gripe about anything I would agree with what SirRichardRear said in his review, the "reverse polarity protection".
Thing is beefy, fits awesome in my hand and like the stiff fire button.
Threw a sfc coil together real quick and into the medusa (which I love btw) ohm'd @ 2.7, decent vape but when I have the time to throw in another build gonna shoot for around .2 - low .2's for a bit stronger vape.
Thing is beefy, fits awesome in my hand and like the stiff fire button.
Threw a sfc coil together real quick and into the medusa (which I love btw) ohm'd @ 2.7, decent vape but when I have the time to throw in another build gonna shoot for around .2 - low .2's for a bit stronger vape.
KingPin!
In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer