Good build for Ghoul and Wasp Nano

[AnkouSitan]

So I’ve been trying to fiddle around with a set up for these two rdas or any single coil rda to use on a Pico Squeeze. I’m just looking for a decent build for flavor that won’t feel like I’m hot boxing a volcano when I use them. Any help would be greatly appreciated.

 

[jwill]

@gadget! is a nano junkie. He may be able to help you get some info you need.

 

[Heartsdelight]

I have both rda’s & if I build to around .30ish ohms its not too hot for me on a mech squonker but still produces.

 

[Neunerball]

So I’ve been trying to fiddle around with a set up for these two rdas or any single coil rda to use on a Pico Squeeze. I’m just looking for a decent build for flavor that won’t feel like I’m hot boxing a volcano when I use them. Any help would be greatly appreciated.

Have you tried some builds yourself already? You might find some builds on YouTube to try out.

 

[AnkouSitan]

Have you tried some builds yourself already? You might find some builds on YouTube to try out.

A couple, but it seems that coil building is not my forte.

 

[Neunerball]

A couple, but it seems that coil building is not my forte.

With a little bit more practice, you'll be able to build your own coils easily. As mentioned already, YouTube is a good reference for learning to make your own builds.

 

[Heartsdelight]

With a little bit more practice, you'll be able to build your own coils easily. As mentioned already, YouTube is a good reference for learning to make your own builds.

I agree, thats how I learned & practice makes perfect. @AnkouSitan you’ll get it.

 

[516_vaper_li]

for single coil rda's I prefer spaced coils.

 

[f1r3b1rd]

For the wasp I used to use a simple 26g parallel coil. 6 wraps @ 3mm id with ss316.

 

[The Cromwell]

So I’ve been trying to fiddle around with a set up for these two rdas or any single coil rda to use on a Pico Squeeze. I’m just looking for a decent build for flavor that won’t feel like I’m hot boxing a volcano when I use them. Any help would be greatly appreciated.

3 mm id 26 ga SS316L 10 wrap parallel. works out to around .35 or a tad higher.
What I use in all my Nanos and also in my OG Merlin RTA.
works great on a Pico squeeze or regulated.

They wind well on a Coilmaster winding tool.

 

[BobsHere]

Wasp using fused clapton ss316L 30gX3/38g 7 wraps ohms out around .44
Nice vape around 35w, not hot. Wick the coil pretty hard, thin the tails a bit, no spitting.

I noted The Cromwell's build awhile back from another thread. Been meaning to try it just haven't yet.

On Edit, sorry didn't register the squeeze in my old brain as I read. No experience with mosfet or mechs.