Hi Vaping Underground members, In this review I take a look at the Dead Rabbit V3 RDA by Hellvape. The Dead Rabbit V3 RDA was supplied for the purpose of this review by Fiona from Hellvape.
Read Rabbit 3 RAD-Hellvape - The DIY atomizer leading brand
Introduction
Hellvape are an atomiser specialist best known for their Dead Rabbit series of RDA's, RTA's and most recently the innovative R Tank. Here we are back to where the Rabbit culling began, the Dead Rabbit RDA, now on version 3!
The new V3 see's the Rabbit ear posts get the cylindrical aerodynamic treatment which also allows plenty of room for trimming after the coils are installed. The other main upgrade is an increase in airflow now having the choice or three rows of honeycomb rather than two or three slots per side.
The V3 was designed with squonking in mind with the flow from the BF pin being directed through channels towards the cotton either side and also having a deep 5mm well! Coming fitted with an anti bacterial 810 drip tip and coming in 8 colour options let's crack on and take a closer look!
_________________________________________________________________________
In The Box
Contents:
1pc Dead Rabbit 3 RDA (Resin Drip Tip)
2pc 0.37ohm Ni80 Fused Clapton Coils
2pc Shoelace Cotton
1pc BF Pin
1pc Accessory bag
1pc Tools bag
1pc Social Media Card
1pc User Manual
_________________________________________________________________________
Aesthetics
The Dead Rabbit V3 came in the usual Orange Hellvape cardboard box packaging with viewing window so the RDA can be seen without opening the box, on the reverse we have specifications and listed contents! I received the Red version, the options are Stainless Steel, Matte Black, Matte Full Black, Gunmetal, Gold, Rainbow, Blue or Red!
Up top we have a Resin 810 Goon fit drip tip with lower Red band that has "HELLVAPE" printed on it! The protruding section of the inner sleeve has a castle design and then the features of the outer sleeve are the three slotted airflow either side (will be honeycomb if lined up with honeycomb airflow of inner sleeve) and large Dead Rabbit logo carved into the metal, on some colour versions including the Red I received this then also has a metallic finish!
Moving to the base we have etched branding, safety marks and serial number, the Gold plated 510 protrudes nicely and will be fine using on mechanical devices, just build safely and know your battery safety and ohms law, also always check the resistance on a tab or regulated device first!
The 24mm in diameter V3 being only about 37mm in height has quite a small compact look to it and at 42g is quite light!
_________________________________________________________________________
Dead Rabbit V3 RDA Specs and Features:
Diameter: 24mm
Height: 37.35mm
Weight: 42g
Capacity: 4.5ml
Drip tip: 810 drip tip
Coil type: dual coil
Honeycomb & Slotted adjustable airflow
Aerodynamic Rabbit Ear Posts
5mm deep juice wells
Side filling via BF Pin for quick transfer to cotton
Use with BF pin or as Standard Dripper
Trim coils leads after installation
Thread: 510
Colours: Stainless Steel, Matte Black, Matte Full Black, Gunmetal, Gold, Rainbow, Blue, Red
_________________________________________________________________________
What You Receive?
As well as the Dead Rabbit V3 RDA with installed anti bacterial Goon fitting Resin 810 drip tip you also receive a manual and social media card.
We then have three bags with spare O-rings, post screws and a BF pin being in one and 2 different sized Allen Keys and a flathead screwdriver being in one of the others.
The final bag comprises of 2 shoelace cotton pieces and a pair of fused claptons, NI80 3.0ID 0.37ohm, full specs not given but I am sure you knowledgeable folks can work out from the information given the gauge of cores and binding!
_________________________________________________________________________
It's Various Parts
Up top we have a Resin 810 goon fitting drip tip which is fitted to the inner sleeve which can be pulled free from the outer sleeve which reveals two opposite sides have honeycomb airflow and the other two sides have a slotted airflow design! The inner sleeve also has a sturdy outer O-ring.
The outer sleeve has slotted airflow either side and this pulls off the deep welled base section. The base has a neat looking post design with gold plated positive posts, the posts while having a new cylindrical look still stays true to the Dead Rabbit ears design!
Pre-installed we have a standard pin but this can be swapped out for the included BF pin!
_________________________________________________________________________
BF Friendly!
The Dead Rabbit V3 with goon style drip tip which is easily pulled free works as well as any other RDA as a standard dripper and has a deep 5mm well! This deep well also makes the V3 very BF friendly with channels that guide the e-liquid from the pin directly either side to your cotton!
The pin holds all the parts of the deck together which is great for cleaning purposes but it does mean the pin can't be swapped out on the fly!
Review Continued Below:
Read Rabbit 3 RAD-Hellvape - The DIY atomizer leading brand
Introduction
Hellvape are an atomiser specialist best known for their Dead Rabbit series of RDA's, RTA's and most recently the innovative R Tank. Here we are back to where the Rabbit culling began, the Dead Rabbit RDA, now on version 3!
The new V3 see's the Rabbit ear posts get the cylindrical aerodynamic treatment which also allows plenty of room for trimming after the coils are installed. The other main upgrade is an increase in airflow now having the choice or three rows of honeycomb rather than two or three slots per side.
The V3 was designed with squonking in mind with the flow from the BF pin being directed through channels towards the cotton either side and also having a deep 5mm well! Coming fitted with an anti bacterial 810 drip tip and coming in 8 colour options let's crack on and take a closer look!
_________________________________________________________________________
In The Box
Contents:
1pc Dead Rabbit 3 RDA (Resin Drip Tip)
2pc 0.37ohm Ni80 Fused Clapton Coils
2pc Shoelace Cotton
1pc BF Pin
1pc Accessory bag
1pc Tools bag
1pc Social Media Card
1pc User Manual
_________________________________________________________________________
Aesthetics
The Dead Rabbit V3 came in the usual Orange Hellvape cardboard box packaging with viewing window so the RDA can be seen without opening the box, on the reverse we have specifications and listed contents! I received the Red version, the options are Stainless Steel, Matte Black, Matte Full Black, Gunmetal, Gold, Rainbow, Blue or Red!
Up top we have a Resin 810 Goon fit drip tip with lower Red band that has "HELLVAPE" printed on it! The protruding section of the inner sleeve has a castle design and then the features of the outer sleeve are the three slotted airflow either side (will be honeycomb if lined up with honeycomb airflow of inner sleeve) and large Dead Rabbit logo carved into the metal, on some colour versions including the Red I received this then also has a metallic finish!
Moving to the base we have etched branding, safety marks and serial number, the Gold plated 510 protrudes nicely and will be fine using on mechanical devices, just build safely and know your battery safety and ohms law, also always check the resistance on a tab or regulated device first!
The 24mm in diameter V3 being only about 37mm in height has quite a small compact look to it and at 42g is quite light!
_________________________________________________________________________
Dead Rabbit V3 RDA Specs and Features:
Diameter: 24mm
Height: 37.35mm
Weight: 42g
Capacity: 4.5ml
Drip tip: 810 drip tip
Coil type: dual coil
Honeycomb & Slotted adjustable airflow
Aerodynamic Rabbit Ear Posts
5mm deep juice wells
Side filling via BF Pin for quick transfer to cotton
Use with BF pin or as Standard Dripper
Trim coils leads after installation
Thread: 510
Colours: Stainless Steel, Matte Black, Matte Full Black, Gunmetal, Gold, Rainbow, Blue, Red
_________________________________________________________________________
What You Receive?
As well as the Dead Rabbit V3 RDA with installed anti bacterial Goon fitting Resin 810 drip tip you also receive a manual and social media card.
We then have three bags with spare O-rings, post screws and a BF pin being in one and 2 different sized Allen Keys and a flathead screwdriver being in one of the others.
The final bag comprises of 2 shoelace cotton pieces and a pair of fused claptons, NI80 3.0ID 0.37ohm, full specs not given but I am sure you knowledgeable folks can work out from the information given the gauge of cores and binding!
_________________________________________________________________________
It's Various Parts
Up top we have a Resin 810 goon fitting drip tip which is fitted to the inner sleeve which can be pulled free from the outer sleeve which reveals two opposite sides have honeycomb airflow and the other two sides have a slotted airflow design! The inner sleeve also has a sturdy outer O-ring.
The outer sleeve has slotted airflow either side and this pulls off the deep welled base section. The base has a neat looking post design with gold plated positive posts, the posts while having a new cylindrical look still stays true to the Dead Rabbit ears design!
Pre-installed we have a standard pin but this can be swapped out for the included BF pin!
_________________________________________________________________________
BF Friendly!
The Dead Rabbit V3 with goon style drip tip which is easily pulled free works as well as any other RDA as a standard dripper and has a deep 5mm well! This deep well also makes the V3 very BF friendly with channels that guide the e-liquid from the pin directly either side to your cotton!
The pin holds all the parts of the deck together which is great for cleaning purposes but it does mean the pin can't be swapped out on the fly!
Review Continued Below:
Last edited: