How many Joules do you vape at?

[Grand Rapids E-Liquid]

I am using an IPV4 with a Kanger Subtank and the ni200 coils. I work 80 hours a week in the shop and have tried 1000's of box & mech mods, a million different builds. But.... The flavor is unreal with the set up. I did a lil research but this does not help..

1. It is equal to the energy transferred (or work done) when applying a force of one newton through a distance of one metre (1 newton metre or N. m), or in passing an electric current of one ampere through a resistance of one ohm for one second. It is named after the English physicist James Prescott Joule (1818–1889).

I like 30 joules at 280 degrees and my batteries last forever (good thing since the fake charger port has no use)

I'll take any input you have..

 

[rdsok]

The USB port on the iPV4 is for upgrading the firmware... not charging. The charge port is the round port and requires a 9v input ( at 2.1a I believe )

 

[Zamazam]

I'm at 35 Joules and 460-480 with my Nautilus with a 0.15 NI200 Coil.

 

[dre]

42j @ 397 on a veritas with single coil .065

 

[WARCHOP37]

50J @ 480F Atlantis v1 with VaporShark ni200 coils.

 

[Mazam]

Drippers i find myself at 32-33J, at 480-500F.

My Lemo Drop and Lemo 2 i seem to prefer 25J at 450F

 

[TheVapingDevil]

Atlantis nickel coils on my Atlantis V1, 32j at 470 degrees with SX M class

Sent from my Samsung Galaxy S5 Dumbphone

 

[rolltidevaper]

NI200 build at .11 on my Kayfun, 425 degrees at 40J on the IPV4. I get about 30-32 hours on my batteries.

 

[zaroba]

around 300 according to a simple calculator on google.

75 watts on my 0.17 ohm rda with a sigelei 100.
usually around 4 second hits.

I go through 2 pairs of batteries most days.

 

[rudogg760]

On my Atlantis nickel coils i run 40 watts and 420 degrees, on my drippers i up it to 60 watts and 550 degrees, nice flavor and massive cloud.

 

[Davect06607]

I am using Nickle OCC coils for my subtank & IPV4, coils are .15ohm. When on temp control, the coil reading goes to .59. Why?
I like 30 Joules @ 400

 

[rolltidevaper]

I am using Nickle OCC coils for my subtank & IPV4, coils are .15ohm. When on temp control, the coil reading goes to .59. Why?
I like 30 Joules @ 400

When the atty is at room temp you need to press the +/- buttons at the same time while in Temp mode to set your resistance. That should fix it.

 

[Kent B Marshall]

Infinite Stellare - .082 30j at 450 - 475
Lemo 2 .072 30j 420 - 440
Kayfun clone .074 30j at 400 - 420

 

[Davect06607]

When the atty is at room temp you need to press the +/- buttons at the same time while in Temp mode to set your resistance. That should fix it.

Thats is what I was missing, Thanks!

 

[f1r3b1rd]

I run alot of attys in temp mode
Lamo2-0.07ohms 26g ni200 @ 25j/480degee
Atlantis coils ni200-35j/480degree
Freak show dual coil 26g ni200 @ 0.08,ohms- 50j/500degrees
Tugboat v2 dual coil 26g ni200 0.09ohm- 45/510/degree
Aquav2- 28gni200 @0.09-35j/460degree
mako-single coil 26g ni200 0.07ohm- 35/510degree
erlkoenegin 28g ni200-0.071ohms-24j/430degrees
freakshowmini-26g single coil-0.07j- 25j/475degrees

 

[Grand Rapids E-Liquid]

I run alot of attys in temp mode
Lamo2-0.07ohms 26g ni200 @ 25j/480degee
Atlantis coils ni200-35j/480degree
Freak show dual coil 26g ni200 @ 0.08,ohms- 50j/500degrees
Tugboat v2 dual coil 26g ni200 0.09ohm- 45/510/degree
Aquav2- 28gni200 @0.09-35j/460degree
mako-single coil 26g ni200 0.07ohm- 35/510degree
erlkoenegin 28g ni200-0.071ohms-24j/430degrees
freakshowmini-26g single coil-0.07j- 25j/475degrees

 

[Grand Rapids E-Liquid]

I run alot of attys in temp mode
Lamo2-0.07ohms 26g ni200 @ 25j/480degee
Atlantis coils ni200-35j/480degree
Freak show dual coil 26g ni200 @ 0.08,ohms- 50j/500degrees
Tugboat v2 dual coil 26g ni200 0.09ohm- 45/510/degree
Aquav2- 28gni200 @0.09-35j/460degree
mako-single coil 26g ni200 0.07ohm- 35/510degree
erlkoenegin 28g ni200-0.071ohms-24j/430degrees
freakshowmini-26g single coil-0.07j- 25j/475degrees

Damn, that comment alone just made life easy.. Thank you!

 

[Paciorekkyle]

around 300 according to a simple calculator on google.

75 watts on my 0.17 ohm rda with a sigelei 100.
usually around 4 second hits.

I go through 2 pairs of batteries most days.

They dont make a sigelei 100 temp control and they register it as joules not watts

 

[Markw4mms]

I run my OBS T-VCT and Kanger sub tank at 30 Joules and 420-450F with Ni200 coils depending on what I'm vaping.

 

[TheVapingDevil]

I run my OBS T-VCT and Kanger sub tank at 30 Joules and 420-450F with Ni200 coils depending on what I'm vaping.

Dying to get into mine tomorrow. Like freaking Xmas eve here at the Devils lair

Sent from my Samsung Galaxy S5 Dumbphone

 

[HDMontana]

30 joules at 430 degrees with a .14 ohm ni200 build.

HD

 

[ren.dnb]

I'm running my atty3 on a single ni200 coil. 50J at 550F. That seems to have improved things for me. This is my first attempt at TC, and so far not sure if I'm liking it as much. I'm going to try a dual ni200 coil build in it later this afternoon and see if that helps.

Not sure if TC is for me, but can definitely see where some people might prefer it.

 

[VapingN252]

Preheats at 80 and backs down to 60 at 420. Perfect for me. Using a billow v2.

 

[ren.dnb]

Ok switched to titanium.. MUCH BETTER! 60J 535 degrees. I think I'm sticking with titanium for awhile.

 

[VapingN252]

What mod are you using? On the DNA 200s, you can load a titanium profile and I did that, but ti doesn't seem to get hot enuff for me. I think it taste better but doesn't get nearly as hot as nickel. My ti at 600F is cooler than nickel at like 430F. I did spaced and contact.

 

[ren.dnb]

What mod are you using? On the DNA 200s, you can load a titanium profile and I did that, but ti doesn't seem to get hot enuff for me. I think it taste better but doesn't get nearly as hot as nickel. My ti at 600F is cooler than nickel at like 430F. I did spaced and contact.

I'm on an IPV4S. Curious about Ti on a dna200 device. I'm eyeballing the vapor shark dna200 or the lavabox. Thats interesting about the heat on the dna200 on ni200 vs ti, can't you adjust the temp coefficient on that device?

Sent from my SM-G900V using Tapatalk

 

[Wingsfan0310]

I'm at 25-30J and 420-450F using a Billow V2 on an IPV3 Li (Ni200 @ .06 ohms)

 

[VapingN252]

You can but I don't want to do some wrong and ruin the experience

 

[dcegan12]

I'm at 25-30J and 420-450F using a Billow V2 on an IPV3 Li (Ni200 @ .06 ohms)

what build do you have in your billow v2? I haven't tried a temp build in mine yet I just assumed the deck would be too small

 

[Wingsfan0310]

what build do you have in your billow v2? I haven't tried a temp build in mine yet I just assumed the deck would be too small

10 wraps (each coil) Ni200 28ga usually is around .07 ohms. The same build using 26ga came out to right about .06 ohms (just checked, it's .058 on my Li). It's a tight squeeze for sure but it can be done.

 

[TheVapingDevil]

On My billows there is 8 wrap 26 g TI that reads .2 contact coils. Def easier than ni200 but I think the nickle may have slightly better flavor in dual coil

Sent from my Samsung Galaxy S5 Dumbphone

 

[drugarth]

25J/170C on a sx mini m with subtank mini/factory ni200 coil. I see no need for higher joules, as it is in no time at my desired temp.

 

[sswick]

Sigelei 150w TC, Atlantis 2 tank
I found a sweet spot at 48J, 400 degrees, 30 watts
Right now I'm using .5 ohm coil but when it ends, all my replacement coils are the .3 ohm coils.

 

[Eric DeCastro]

50 on an orchid running 26g Ti 274*

 

[Eric DeCastro]

50 on an orchid running 26g Ti 274*

 

[Deucesjack]

I have an SX Mini M class with a Kanger Subtank. I use the OCC Kanger Ni200 coils. I run the mod at 28 joules at 385f. Works for me. Every once in a while I go up to 30 joules and 400f.

 

[Masher59]

IPV 3Li VR with Crown tank and Ni200. My sweet spot is 40 joules at 450 degrees and my HG2s last almost 2 days.

 

[Pisces23]

I just got my Sigelei 150 so I'm still playing with it. But right now I'm at 27.3 j at 420°f with ni200 coils on my Kanger subtank at .15 ohms

 

[AmandaD]

SS 316L dual coils on a velocity mini at 0.3 ohms with the SX M class in SS mode - running 50J and 572F

 

[skt239]

0.15 Starre coil, 480-500, 40-45 joules.

 

[vwfan79]

OK so I run a evic vtc mini and have an eleaf istick 60w coming the evic reads in watts so how do I compare to joules? Currently running Atlantis ni200 at 48w at 460 degrees and ss at 48w at 380 degress

 

[AmandaD]

OK so I run a evic vtc mini and have an eleaf istick 60w coming the evic reads in watts so how do I compare to joules? Currently running Atlantis ni200 at 48w at 460 degrees and ss at 48w at 380 degress

I think watts are pretty close to joules, just used on different boards!

 

[PaulS]

I finf the joules do not matter that much. It just affectsa the ramp up tiome to get to the temp. Ask me what temp I vape at - that is more to the point. Nickel and SS I vape between 410-470 depending on the device and juice.

 

[sswick]

I just got my Sigelei 150 so I'm still playing with it. But right now I'm at 27.3 j at 420°f with ni200 coils on my Kanger subtank at .15 ohms

48 joules at 400 degrees gives me huge clouds. Atlantis 2 tank with .3 ohm coils.

 

[ej1024]

Watts joules are the same


VAPE ON

 

[Masher59]

3Li with Crown tank and 50 joules.

 

[conanthewarrior]

I set my temp limit to whatever I like-and then treat joules as watts, as essentially they are that, watts per second(there is a bit more than that, but that is basically it). . Say I would usually use 20-25W for that type of build, thats exactly what I use. I find setting the joules excessively high offers no benefit at all.

I actually wonder why some devices use joules in TC and some in watts, as it causes confusion to people.

Your Temp limit is there to stop the coil going OVER your limit, you just vape normally with one extra setting.

 

[conanthewarrior]

No... there really isn't any more to it than that.

And I agree it is creating confusion.
I don't know who started it, but I'm still going with "marketing".

Oh there isn't? I thought it was the power of 1 watt across a wire of 1 ohm for 1 second, but that is essentially it I guess really isn't it? So really it is it I guess. Joules are just another name for watts.

Yeah definitely 'marketing'. They probably thought that joules would sound better or something silly, and all its done is cause confusion to people. I just set my temp to where I would like it to max out at, and then vape normally, J/W up or down according to the build.

 

[Powerman]

I don't really understand why it is confusing. In power mode it's watts. Which is how power is measured. Energy over time. Voltage is a measurement. Current adds time. It isn't a number, it's a number over a measurement of time. Expressed equally as a joule second.

Joule second is called joules. No different than kilowatts. It's not a kilowatt, it's a kilowatt hour.

I don't really think it's a marketing gimmick. Some mods show watts for power and joules for TC. Helps to differentiate the two. Same measurement. It's all a unit of energy over a unit of time.

 

[Powerman]

Energy is energy. Work is Energy in motion. Energy over a distance. Power is Energy in motion over time. Work done over time. Work is foot pounds of torque. Power is horse power, foot pounds over time. For this, volts is energy, current is work (electron mass moving), power is electrons moving by applied force over time.