Ijoy rdtabox no atomizer warning

Discussion in 'Regulated (Voltage / Wattage / 3.7v/ Temp Control)' started by Gregory.tomczak, Dec 5, 2016.

  1. Gregory.tomczak

    Gregory.tomczak Bronze Contributor

    Blog Posts:
    0
    Joined:
    Oct 22, 2016
    Messages:
    161
    So I just got my new rdtabox in. I have my daughter today so not able to do a build on it yet so I figured I try out the pre built imc coil 3 that comes with it. Well it worked for bout 20mins before giving me no atomizer warning on the box. Anyone seen this yet or have this issue?
    [​IMG][​IMG][​IMG]


    Sent from my iPhone using Tapatalk
     
    Last edited: Dec 5, 2016
  2. Gregory.tomczak

    Gregory.tomczak Bronze Contributor

    Blog Posts:
    0
    Joined:
    Oct 22, 2016
    Messages:
    161
    So I think I fixed my issue at least temporarily. So if you use the pre made coil and it gives you issues just shake or move the top cap around a bit from side to side. I'm wondering if the top cap and the coils are somehow touching when it's not supposed to. I did figure out if you have the combo rdta that top cap fits and has no issues at all


    Sent from my iPhone using Tapatalk
     
  3. Paratech

    Paratech I forgot VU Donator Gold Contributor Member For 1 Year

    Blog Posts:
    1
    Joined:
    Dec 8, 2015
    Messages:
    2,649
    What is that in the top left corner between the coil and the side wall?
     
  4. Gregory.tomczak

    Gregory.tomczak Bronze Contributor

    Blog Posts:
    0
    Joined:
    Oct 22, 2016
    Messages:
    161
    It's where the air hole comes in from the side. I guess the angle I took the photo looks like a piece of metal. Just looked and nothing is there


    Sent from my iPhone using Tapatalk
     
  5. Paratech

    Paratech I forgot VU Donator Gold Contributor Member For 1 Year

    Blog Posts:
    1
    Joined:
    Dec 8, 2015
    Messages:
    2,649
    oh, I see now.
    Yeah, I thought it was metal touching the coil.
    I'm impatiently awaiting for mine to arrive.
     
  6. Gregory.tomczak

    Gregory.tomczak Bronze Contributor

    Blog Posts:
    0
    Joined:
    Oct 22, 2016
    Messages:
    161
    It's an amazing mod haven't built on it yet but the prebuilt coils aren't too bad minus the issue I'm having with mine. Just make you update it. The update allows for tcr inputs and a few other little things. The yellow is sick looking in person. I've seen the red so far also.


    Sent from my iPhone using Tapatalk
     
  7. Paratech

    Paratech I forgot VU Donator Gold Contributor Member For 1 Year

    Blog Posts:
    1
    Joined:
    Dec 8, 2015
    Messages:
    2,649
    I ordered the black.
    Was sent an email stating the black still hadn't been through production so they are sending either red or yellow.
    I'll be surprised.
     
  8. Gregory.tomczak

    Gregory.tomczak Bronze Contributor

    Blog Posts:
    0
    Joined:
    Oct 22, 2016
    Messages:
    161
    That kinda sucks but either color looks nice. My yellow reminds me of bumble bee from transformers. Looks like it's going to transform when it's sitting on my table. Lol


    Sent from my iPhone using Tapatalk
     
  9. sinner7575

    sinner7575 New Member

    Blog Posts:
    0
    Joined:
    Sep 27, 2016
    Messages:
    8
  10. Gregory.tomczak

    Gregory.tomczak Bronze Contributor

    Blog Posts:
    0
    Joined:
    Oct 22, 2016
    Messages:
    161
    So I wonder how many devices have issues and if they will fix the product. I'm really getting tired of buying things that are supposed to work we get the device and it's messed up from the factory and completely the companies fault but they won't fix or replace the device. Shame on you ijoy. It's seems to be the norm that a vape company can sell you broken stuff and it's okay. No one cares. Let me buy something other than vape products and it be broken or a problem from the factory crazy thing is they fix it or replace it. Rant over. But on the real we all need to make these companies understand that it's not okay to sell us broken stuff. Now rant over. Lol


    Sent from my iPhone using Tapatalk
     
  11. VaporCarp

    VaporCarp #BlackRiflesMatter VU Donator Gold Contributor Member For 1 Year

    Blog Posts:
    0
    Joined:
    Oct 31, 2015
    Messages:
    2,872
    Fuk me
     
    Gregory.tomczak likes this.
  12. sinner7575

    sinner7575 New Member

    Blog Posts:
    0
    Joined:
    Sep 27, 2016
    Messages:
    8
    i just received the replacement box in the mail when i got home. ill keep you guys posted if its still getting the no atomizer warning. it sucks cause this device has the potential to be so damn great, and just a few flaws is screwing it up!!!
     
  13. Gregory.tomczak

    Gregory.tomczak Bronze Contributor

    Blog Posts:
    0
    Joined:
    Oct 22, 2016
    Messages:
    161
    Sent you a pm


    Sent from my iPhone using Tapatalk
     
  14. erebusting

    erebusting New Member

    Blog Posts:
    0
    Joined:
    Dec 27, 2016
    Messages:
    2
    I have had the same problem ever since I got mine. iJoy seems to be ignoring all communications, sad. Any way that we can fix this ourselves and forget about iJoy? ty!
     
  15. Gregory.tomczak

    Gregory.tomczak Bronze Contributor

    Blog Posts:
    0
    Joined:
    Oct 22, 2016
    Messages:
    161
    So I finally got a hold of ijoy. If you chat with them on their website. The little pop up box on the lower end of the screen on the pc. I found out there is an update version 2.1 firmware that fixed my problem at least for now. I'll update this is the problem comes back. They were helpful and was willing to fix the device if the problem persists.


    Sent from my iPhone using Tapatalk
     
  16. Gregory.tomczak

    Gregory.tomczak Bronze Contributor

    Blog Posts:
    0
    Joined:
    Oct 22, 2016
    Messages:
    161
    So I got another answer from ijoy along with the mid picture that will fix almost all the problems with the rdta box. I really hope this helps anyone having problems

    [​IMG]


    Sent from my iPhone using Tapatalk
     
    VaporCarp likes this.
  17. SirRichardRear

    SirRichardRear AKA Anthony Vapes on Youtube VU Donator Diamond Contributor Member For 1 Year Reviewer

    Blog Posts:
    0
    Joined:
    Jul 8, 2016
    Messages:
    10,837
    if i get one it'll be tiffany blue or cyan
     
  18. Gregory.tomczak

    Gregory.tomczak Bronze Contributor

    Blog Posts:
    0
    Joined:
    Oct 22, 2016
    Messages:
    161
    I don't know my yellow is amazing looking just like bumble bee from transformers. Lol


    Sent from my iPhone using Tapatalk
     
  19. SirRichardRear

    SirRichardRear AKA Anthony Vapes on Youtube VU Donator Diamond Contributor Member For 1 Year Reviewer

    Blog Posts:
    0
    Joined:
    Jul 8, 2016
    Messages:
    10,837
    It is, but I have a yellow mod already and no cyan mod. I do have Tiffany blue already in my slice so I'm leaning towards cyan.

    Sent from my SM-G935V using Tapatalk
     
    Gregory.tomczak likes this.
  20. VaporCarp

    VaporCarp #BlackRiflesMatter VU Donator Gold Contributor Member For 1 Year

    Blog Posts:
    0
    Joined:
    Oct 31, 2015
    Messages:
    2,872
    I have a teal on the way. Might have to get a yellow too lol
     
  21. Paratech

    Paratech I forgot VU Donator Gold Contributor Member For 1 Year

    Blog Posts:
    1
    Joined:
    Dec 8, 2015
    Messages:
    2,649
    I have the red plus waiting on the teal one to get off that boat.
    Considering just ordering them all.
    By time they get here Ijoy will have 9 new colors for me to order.
     
    VaporCarp and SirRichardRear like this.
  22. SirRichardRear

    SirRichardRear AKA Anthony Vapes on Youtube VU Donator Diamond Contributor Member For 1 Year Reviewer

    Blog Posts:
    0
    Joined:
    Jul 8, 2016
    Messages:
    10,837
    Which one hits the hardest lol

    Sent from my SM-G935V using Tapatalk
     
    VaporCarp likes this.
  23. Paratech

    Paratech I forgot VU Donator Gold Contributor Member For 1 Year

    Blog Posts:
    1
    Joined:
    Dec 8, 2015
    Messages:
    2,649
    I'm guessing one of the ones I don't have yet.
    With the builds I'm using in it I set it at 100 watts and leave it.
     
  24. SirRichardRear

    SirRichardRear AKA Anthony Vapes on Youtube VU Donator Diamond Contributor Member For 1 Year Reviewer

    Blog Posts:
    0
    Joined:
    Jul 8, 2016
    Messages:
    10,837
    That's a good wattage. That's around where I usually vape.

    Sent from my SM-G935V using Tapatalk
     
  25. erebusting

    erebusting New Member

    Blog Posts:
    0
    Joined:
    Dec 27, 2016
    Messages:
    2
    Can we not hijack this thread? We actually have legitimate errors with the device, lol.

    I got the same Facebook message as well. I hope that we can fix this asap. I wish we didn't have to fiddle with it, I actually don't have the time to do that. I hate to send it back though that would be more hassle for me I think lol.
     
  26. Paratech

    Paratech I forgot VU Donator Gold Contributor Member For 1 Year

    Blog Posts:
    1
    Joined:
    Dec 8, 2015
    Messages:
    2,649
    @Gregory.tomczak posted the potential fix that you asked for.

    Now you say you don't want to fiddle with it NOR send it back.
    While I am trying to NOT hijack this thread what is it that you actually want?
    Someone to come fix it for you while you're napping?
     
    SirRichardRear and VaporCarp like this.
  27. Shadow915

    Shadow915 New Member

    Blog Posts:
    0
    Joined:
    Mar 15, 2017
    Messages:
    1
    I just go my ijoy I like it it gives great flavor and big clouds, but it gave me the dread error. I see y'all posted this back in December well here it is March and they still have this problem with the ijoy WTF thanks for the post guys I will see what I can do to fix this problem. Vap on!!
     

Share This Page

Close This Message