Become a Patron!
Modfather Inc 30mm RTA
- Thread starter Catalyst
- Start date
Kidney puncher says mid febIts more available in the states Than anywhere else , So im sure if you check out the retailer listed in this thread one will have it , if not be soon restocking
Sent from my ONEPLUS A3003 using Tapatalk
Sent from my SM-N910P using Tapatalk
I wish I could be embarrassed by that coil. While I do see the mess up I do know how hard those are to make. Mind you I only tried 3 core fused claptons and those are hard by themselves.Ugh the one on the right is sooooo embarrassing
Sent from my iPhone using Tapatalk
Also I laughed at first because I was thinking dirty...the little one embarrassed compared to the big one lol
I have been using the same set of coils for (2) months......Going on (3) months soon.......Ugh the one on the right is sooooo embarrassing
Sent from my iPhone using Tapatalk
Sent from my Z981 using Tapatalk
That pic is also from about 3 months ago they've gotten muchhhh better
Sent from my iPhone using Tapatalk
Soooo question....what the hell am I doing wrong?
Whenever I refill my Voltrove I'm getting a terrible amount of flooding. I always try to vape all the juice out of my tank before refilling and try to fill slow. Never fails I get ejuice everywhere coming out of the AFC.
Here's my build/cotton. I even put extra cotton under the coil. I do not push the cotton through the juice holes it just sits above them covering them (should I be?)
Sent from my iPhone using Tapatalk
Whenever I refill my Voltrove I'm getting a terrible amount of flooding. I always try to vape all the juice out of my tank before refilling and try to fill slow. Never fails I get ejuice everywhere coming out of the AFC.
Here's my build/cotton. I even put extra cotton under the coil. I do not push the cotton through the juice holes it just sits above them covering them (should I be?)
Sent from my iPhone using Tapatalk
Do you "Burp" the Tank?Soooo question....what the hell am I doing wrong?
Whenever I refill my Voltrove I'm getting a terrible amount of flooding. I always try to vape all the juice out of my tank before refilling and try to fill slow. Never fails I get ejuice everywhere coming out of the AFC.
Here's my build/cotton. I even put extra cotton under the coil. I do not push the cotton through the juice holes it just sits above them covering them (should I be?)
Sent from my iPhone using Tapatalk
Ahhh, the Boreas Burp. I'll let Ro55co handle that.
Variety's the very spice of life, that gives it all it's flavour.
-William Cowper
Close off the AFC, fill the tank (fill it fast). Then when full screw the top down to about 1 turn from closing, flip the tank, open the afc and tighten, then you can flip it back over but only with maybe only a 1/4 of the afc open.
Thank you! ::Roll of paper towel on hand:: Here goes nothing.
Sent from my iPhone using Tapatalk
Thanks for all your help! I think I got it
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
So, how's it Vape?Thanks for all your help! I think I got it
Sent from my iPhone using Tapatalk
I've got one inbound and also have a HOG V3 inbound also for it.
Like a beast as per expectations. I will say I had some SS fused claptons in here before they came in at about 0.18ohms much nicer warmer vape. The aliens I have in here now are at 0.35ohm a little weak for my liking.
However, I do have a box being made for me at the moment that will be a parallel series setup. I'm hoping the aliens will be a little more lively with the 8.4v mod. I'm currently running the Voltrove on my Hohm Wrecker so it's a bit under powered I think for 8 wrap Aliens I have in here now.
Sent from my iPhone using Tapatalk
Yep, that's why I pulled the trigger on a HOG V3. The size of the deck is huge, from the looks of it the same size as a 30mm RDA. I get the best Vape from my 30mm RDA's around 0.4 on my Big Pig Series Mod's. So with this Tank I figured the HOG would be a perfect match
Yeah I was talking to Sirrichard I'm thinking about getting the Sony VTC5A's. What are you running in your HOG?
Sent from my iPhone using Tapatalk
Ughhh so sexy! I can't wait to show you guys what I have in the works it'll be similar to the HOG just a little different. I'm expecting the box in a couple more weeks I'll be sure to post plenty of pics
Sent from my iPhone using Tapatalk
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
Custom made?Ughhh so sexy! I can't wait to show you guys what I have in the works it'll be similar to the HOG just a little different. I'm expecting the box in a couple more weeks I'll be sure to post plenty of pics
Sent from my iPhone using Tapatalk
Sent from my SM-G935V using Tapatalk
Yeapppp spent a little more than I'd like but I think it's going to come out really nice.
Sent from my iPhone using Tapatalk
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
I don't have my HOG yet, actually the bastards haven't shipped it yet!
Anyway for 18650's can't recommend Sony VTC5A's enough, 2500 mAh and 25a, you just can't go wrong with that. So that would mean I could safely push 42a in the HOG. Waaaaaaaaaaaaay to hot for me, Vaping over 320w is fucking insanity IMO. But having lots of wiggle room with Amps means really long battery life with a very rowdy build!
Still waiting on my Hog V3 
But I got this BEAUTIFUL BEAST in, overhang really isn't that bad on the Big Pig. Way to late tonight but put her through the Ultrasonic, replace the shit flat heads with proper hex grub screws, then I'll spin up some wire for a build when I get up in the "late' morning. Looking over the deck I don't think I'll have issues with 4mm di coils.
@MannyScoot I'm thinking you need this Beast in your life!
Looking forward to seeing how she Vapes!
But I got this BEAUTIFUL BEAST in, overhang really isn't that bad on the Big Pig. Way to late tonight but put her through the Ultrasonic, replace the shit flat heads with proper hex grub screws, then I'll spin up some wire for a build when I get up in the "late' morning. Looking over the deck I don't think I'll have issues with 4mm di coils.
@MannyScoot I'm thinking you need this Beast in your life!
Looking forward to seeing how she Vapes!
That's a bad tank... I've been looking but I can't afford $100.00 for this beautiful thing..... It's like a Modfather on Viagra.Still waiting on my Hog V3
But I got this BEAUTIFUL BEAST in, overhang really isn't that bad on the Big Pig. Way to late tonight but put her through the Ultrasonic, replace the shit flat heads with proper hex grub screws, then I'll spin up some wire for a build when I get up in the "late' morning. Looking over the deck I don't think I'll have issues with 4mm di coils.
@MannyScoot I'm thinking you need this Beast in your life!
Looking forward to seeing how she Vapes!
Sent from my Z981 using Tapatalk
Keep an eye out, I got mine from Kidney Puncher for $80 and it is a wonderful BEAST. If you think the Modfather is a Beast wait till you get your hands on this. Superb flavor, Superb machining HUGE and I do mean HUGE build deck. She performs like ......... well it is a Modfather ya know. Hell I'm choking on my Vape, I need to put a milder build in it. But this seriously is an amazing Tank.
I measured it, it holds 25ml! Holy SHIT!
Yep, Manny, you really do need this BEAST in your life!
I found (2) on eBay for $95.00 plus shipping.. . Nowhere to be found..Even Kidney Puncher.... Gone
Sent from my Z981 using Tapatalk
Still waiting on my Hog V3
But I got this BEAUTIFUL BEAST in, overhang really isn't that bad on the Big Pig. Way to late tonight but put her through the Ultrasonic, replace the shit flat heads with proper hex grub screws, then I'll spin up some wire for a build when I get up in the "late' morning. Looking over the deck I don't think I'll have issues with 4mm di coils.
@MannyScoot I'm thinking you need this Beast in your life!
Looking forward to seeing how she Vapes!
@r055co what size grub screws? I'd like to replace mine if you have the tread size on hand I'd like to know
thanks! Sent from my iPhone using Tapatalk
3m*4@r055co what size grub screws? I'd like to replace mine if you have the tread size on hand I'd like to know
Sent from my iPhone using Tapatalk
Do yourself a favor and start accumulating a stock of Grub Screws. Over the last few months when ever I bought something off eBay I threw in a batch of Hex Grub screws. I now have batch's of 100 of 1.6mm to 5mm in lengths of 2mm - 6mm@r055co what size grub screws? I'd like to replace mine if you have the tread size on hand I'd like to know
Sent from my iPhone using Tapatalk
They come in Very, Very handy
I fucking love this Tank!!!!!!!!!!!!!!!!!!!!!!!!!!!
Do yourself a favor and start accumulating a stock of Grub Screws. Over the last few months when ever I bought something off eBay I threw in a batch of Hex Grub screws. I now have batch's of 100 of 1.6mm to 5mm in lengths of 2mm - 6mm
They come in Very, Very handy
I fucking love this Tank!!!!!!!!!!!!!!!!!!!!!!!!!!!
Yeah I have a great hardware store down the street I used to work at they have all the assortment I'll ever need!! I love screws it's weird, I know all the sizes pitch/thread counts lol. I'm still waiting on my custom box I'll be sure to upload plenty pics when it arrives
Sent from my iPhone using Tapatalk
Oh and I highly recommend getting this juice, I tried the Mother of Unicorns Milk, really liked it. Now I've been Vaping the Cannoli, excellent flavor also. It's smooth, tasty and dam cheap, I've been digging it. $75 for a liter, with the Modfather it's become a necessity
https://1000ml.me/
https://1000ml.me/
Mikhail Naumov
VU Donator
Gold Contributor
Member For 3 Years
Member For 2 Years
ECF Refugee
Unlisted Vendor
It'll be only one left if I have anything to say about it, though I hate this motherfucker is making me bid instead of giving me a buy it now price. I'm willing to pay more than the $80 retail for one of these ultra rare unicorns that won't be seen on the market again for at least another month.
Last edited:
I have a Gold one I'll sell but it must be purchased with 2 Lawless Tips and a postless deck
Mikhail Naumov
VU Donator
Gold Contributor
Member For 3 Years
Member For 2 Years
ECF Refugee
Unlisted Vendor
A 40mm? I've only seen SS, so I'll assume you're speaking of a 30mm MF or just, yanking the old chain and what not?
He's talking about the 30mm, yes it is only available in SS and one deck.
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
I was thinking about the sampler pack. 300ml for 35 bucks is pretty good and it has all the flavorsOh and I highly recommend getting this juice, I tried the Mother of Unicorns Milk, really liked it. Now I've been Vaping the Cannoli, excellent flavor also. It's smooth, tasty and dam cheap, I've been digging it. $75 for a liter, with the Modfather it's become a necessity
https://1000ml.me/
Sent from my SM-G935V using Tapatalk
It's worth it IMO.
Flavors I've tried so far are
- Mother of Unicorn Milk - Excellent strawberry milkshake flavor, damn this shit is good
- Cannoli - It's Cannoli and they hit it pretty much on the head, damn this shit is good
- Dragonfruit - Damn good also, not a big fruit flavor guy but it's nice to change things up a bit this is good also
I've found all their juices to be good, it's smooth not harsh so far. It's not overly sweet which is a major, major plus. It doesn't gunk the shit out of my coils either and I've really been digging it.
Mikhail Naumov
VU Donator
Gold Contributor
Member For 3 Years
Member For 2 Years
ECF Refugee
Unlisted Vendor
Roughly nine hours left before the bidding is over and I'm the only bidder on the higher serial number one, I avoided the low serial one because I knew people would bid on it near the end (and I was right). I'm just waiting for that Highlander moment at the 15 minute mark where I somehow end up paying $250 for this thing because I refuse to be outbid only to have to wait until nearly April to get one.
Oh wait till you get your Dick Skinner's on that Tank, it's a Beast. I've really been loving mine, I've got to put a milder build in it though. I ended up with a 0.3 ohm build and on the Big Pig, way to hot. I've finally Vaped the 25ml tank and will be putting a 0.5 build in and my HOG V3 could be in next week, all depends on if customs wants to screw with it or not.
Mikhail Naumov
VU Donator
Gold Contributor
Member For 3 Years
Member For 2 Years
ECF Refugee
Unlisted Vendor
The HOG V3, something the fuck else I want really badly but cannot for the life of me find in stock anywhere. I'm about to bite the bullet and purchase a clone, because I've vaped plenty of S/P mods before, the main reason I want it is because it's the only mod I know of outside of custom built shit that can seat 40mm+ devices and still look damned good with no overhang.
