need good dedicated single coil rda for squonking

Discussion in 'Bottom Feeders / Squonking' started by violreta3101, Jul 26, 2017.

  1. violreta3101

    violreta3101 New Member

    Blog Posts:
    0
    Joined:
    Jun 12, 2017
    Messages:
    22
    can someone recommend a good single coil rda for my coppervape bf mod?

    thanks~~
     
    Deucesjack likes this.
  2. 315jessie

    315jessie Silver Contributor

    Blog Posts:
    0
    Joined:
    Feb 16, 2017
    Messages:
    528
    Look at the pulse 22 by vandy vape


    Sent from my iPhone
     
  3. 315jessie

    315jessie Silver Contributor

    Blog Posts:
    0
    Joined:
    Feb 16, 2017
    Messages:
    528
    [​IMG]


    Sent from my iPhone
     
    Heartsdelight and Deucesjack like this.
  4. ieatOhms

    ieatOhms Silver Contributor ECF Refugee

    Blog Posts:
    0
    Joined:
    Mar 6, 2017
    Messages:
    624
    I like the pulse as well, but think it is entirely too much airflow for a single coil atty. I would give the Hadaly a go, the flavor is far superior than most other single coil atomizers out there.
     
    jcash74, skt239 and JuicyLucy like this.
  5. Deucesjack

    Deucesjack VU Donator Platinum Contributor Member For 2 Years ECF Refugee

    Blog Posts:
    0
    Joined:
    Sep 8, 2015
    Messages:
    7,959
    Love my Pulse 22 but ieatOhms is right it is very airy for a one lunger. I did a full review of it here.

    Vandy Vape Pulse 22
    https://www.vapinginsider.com/vandy-vape-pulse-22-rda-review/






    Sent from my LG-K425 using Tapatalk
     
  6. JuicyLucy

    JuicyLucy My name is Lucy and I am a squonkaholic VU Donator Diamond Contributor Member For 1 Year ECF Refugee

    Blog Posts:
    1
    Joined:
    Mar 31, 2016
    Messages:
    15,837
    What are the atties you currently use?
     
    Heartsdelight likes this.
  7. violreta3101

    violreta3101 New Member

    Blog Posts:
    0
    Joined:
    Jun 12, 2017
    Messages:
    22
    thanks!! if it is too airly then..its not for me. I only use half of the air holes open on all my atties.
     
  8. violreta3101

    violreta3101 New Member

    Blog Posts:
    0
    Joined:
    Jun 12, 2017
    Messages:
    22
    I currently have goon 24, peerless, and ikon by vandyvape :)
     
    Heartsdelight likes this.
  9. JuicyLucy

    JuicyLucy My name is Lucy and I am a squonkaholic VU Donator Diamond Contributor Member For 1 Year ECF Refugee

    Blog Posts:
    1
    Joined:
    Mar 31, 2016
    Messages:
    15,837
    If you like the Goon, they squonkify beautifully and easily

    The Druga by Augvape is a nice squonk attie with a huge deck with plenty of air options - at a good price too. Reminds me a lot of the Goon, of which I have several, all sqounkified, lol
     
    Heartsdelight and inspects like this.
  10. inspects

    inspects Squonkamaniac Staff Member Senior Moderator VU Donator Platinum Contributor Member For 2 Years

    Blog Posts:
    0
    Joined:
    Jan 10, 2015
    Messages:
    8,134
    Indeed, duh Goon is a good bottom feeder.....!
     
    Heartsdelight and JuicyLucy like this.
  11. Nevweezy

    Nevweezy VU Donator Silver Contributor Member For 1 Year

    Blog Posts:
    0
    Joined:
    Apr 25, 2016
    Messages:
    1,437
    You want a single coil. I would pick up a clone Hadley to see if you like a more restricted airflow flavor atty. I have one and it is pretty awesome. Makes me wanna get an authentic.
     
    Heartsdelight and Deucesjack like this.
  12. TxThumper

    TxThumper Bronze Contributor

    Blog Posts:
    0
    Joined:
    Jul 22, 2017
    Messages:
    197
    the coilart dpro rda is squonkable. its a dual coil, postless rda, but you can rock it in single coil mode. and the air flow is slightly restricted.
     
    Heartsdelight likes this.
  13. JuicyLucy

    JuicyLucy My name is Lucy and I am a squonkaholic VU Donator Diamond Contributor Member For 1 Year ECF Refugee

    Blog Posts:
    1
    Joined:
    Mar 31, 2016
    Messages:
    15,837
    If you go for the Hadaly and don't want to spring for an authentic one, avoid the SXK clone, it is not up to snuff.

    The ShenRay version is pretty darn close to the authentic
     
  14. Street_hawk666

    Street_hawk666 Member For 2 Years

    Blog Posts:
    0
    Joined:
    Sep 24, 2015
    Messages:
    92
    I use the gorge and the wasp nano lots of flavour and authentic as cheap as chips I paid 11 quid for the nano and about 25 for the gorge

    Sent from my SM-G935F using Tapatalk
     
    CrazyChef v2.0 likes this.
  15. 315jessie

    315jessie Silver Contributor

    Blog Posts:
    0
    Joined:
    Feb 16, 2017
    Messages:
    528
    Also look at the hadaly authentic or clone ... I have the clone and love it

    [​IMG]


    Sent from my iPhone
     
  16. Heartsdelight

    Heartsdelight Gold Contributor Member For 2 Years

    Blog Posts:
    0
    Joined:
    Sep 25, 2015
    Messages:
    3,097
    I have the Pulse 22 & with 1 airflow hole open, for me it's not too airy. I like restricted lung hit. I love mine, single coil, easy to build, just have to get coil height right. Hard for it to leak. All in all I love mine.
     
  17. Deucesjack

    Deucesjack VU Donator Platinum Contributor Member For 2 Years ECF Refugee

    Blog Posts:
    0
    Joined:
    Sep 8, 2015
    Messages:
    7,959
    Totally agree, love mine that way as well.

    Sent from my LG-K425 using Tapatalk
     
    SteelDriver and Heartsdelight like this.
  18. violreta3101

    violreta3101 New Member

    Blog Posts:
    0
    Joined:
    Jun 12, 2017
    Messages:
    22
    I love my goon. its awsome!! i will check oit the haladay. thanks everyone.
     
    Heartsdelight likes this.
  19. The.Drifter

    The.Drifter Bronze Contributor Member For 3 Years

    Blog Posts:
    0
    Joined:
    Oct 15, 2014
    Messages:
    378
    The Mulciber is also great as a single coil atty :)

    [​IMG]

    [​IMG]

    Comes with a bottom feeding pin and reasonably priced for a authentic (around $65) and clones in the $10 range ;)
     
    Last edited: Jul 27, 2017
  20. violreta3101

    violreta3101 New Member

    Blog Posts:
    0
    Joined:
    Jun 12, 2017
    Messages:
    22
    thank you for the heads up!!
     
  21. JuicyLucy

    JuicyLucy My name is Lucy and I am a squonkaholic VU Donator Diamond Contributor Member For 1 Year ECF Refugee

    Blog Posts:
    1
    Joined:
    Mar 31, 2016
    Messages:
    15,837
    Drifter's suggestion of the Mulciber is probably a pretty good one - while I don't have one yet - I hear nothing but good things about it from long-time dedicated squonk masters
     
  22. Carambrda

    Carambrda Gold Contributor

    Blog Posts:
    0
    Joined:
    Feb 23, 2017
    Messages:
    1,554
    The Deathwish Modz Deathtrap RDA also comes with a bottom feeding pin already included in the package... and it is an RDA specifically designed for single coil builds.
     
    Heartsdelight likes this.
  23. errevi

    errevi Member For 1 Year

    Blog Posts:
    0
    Joined:
    Sep 16, 2016
    Messages:
    89
    I have Hadaly, Wasp Nano and Pulse
    Get Hadaly
     
  24. PuffOn

    PuffOn Bronze Contributor Member For 3 Years

    Blog Posts:
    0
    Joined:
    Oct 21, 2014
    Messages:
    276
  25. violreta3101

    violreta3101 New Member

    Blog Posts:
    0
    Joined:
    Jun 12, 2017
    Messages:
    22
    thanks. im gonna try out the clone and see if i like it before i jump on an authentic one.
     
    errevi and Heartsdelight like this.
  26. violreta3101

    violreta3101 New Member

    Blog Posts:
    0
    Joined:
    Jun 12, 2017
    Messages:
    22
    should i get 22mm or 24mm fir hadaly? any significant difference beside the size? all my attys are 24mm.
     
  27. skt239

    skt239 VU Donator Platinum Contributor Member For 2 Years

    Blog Posts:
    0
    Joined:
    Sep 16, 2015
    Messages:
    5,432
    There is only a 22mm as far as the Hadaly goes. It's a great atty, especially for squonking.
     
    Heartsdelight and Nevweezy like this.
  28. violreta3101

    violreta3101 New Member

    Blog Posts:
    0
    Joined:
    Jun 12, 2017
    Messages:
    22
    thanks. I just realized only 22 is avalible.
    just ordered one from 3fvape. waiting begins.

    recommend coil set up for this rda?
    Im currently running duo 28g parallel ohms out at 0.20ohms on my cv bf. thanks!
     
    Heartsdelight, skt239 and Nevweezy like this.
  29. skt239

    skt239 VU Donator Platinum Contributor Member For 2 Years

    Blog Posts:
    0
    Joined:
    Sep 16, 2015
    Messages:
    5,432
    I run all kinds of builds in mine. From simple round wire builds to fancy claptons of all stripes. Everything vapes great out of it.
     
    Heartsdelight likes this.
  30. MaxPerilous

    MaxPerilous Silver Contributor ECF Refugee

    Blog Posts:
    0
    Joined:
    Jul 1, 2017
    Messages:
    701
    I bought my wife an SXK clone Hadaly. What specifically is different from it and some others/the original? I'm not a fan of the one she has. She says she likes it but it's her only rda. She is used to her lil vaporesso tanks.
     
  31. JuicyLucy

    JuicyLucy My name is Lucy and I am a squonkaholic VU Donator Diamond Contributor Member For 1 Year ECF Refugee

    Blog Posts:
    1
    Joined:
    Mar 31, 2016
    Messages:
    15,837
    The air channels are different on the clone and the clamps aren't as substantial making it harder to clamp to the coils into place

    When I was still vaping the SXK, I kept it wide open, while I only use half the air on an authentic
     
  32. MaxPerilous

    MaxPerilous Silver Contributor ECF Refugee

    Blog Posts:
    0
    Joined:
    Jul 1, 2017
    Messages:
    701

    That's the two things I hated most about it! Thanks for the reply!
     
  33. JuicyLucy

    JuicyLucy My name is Lucy and I am a squonkaholic VU Donator Diamond Contributor Member For 1 Year ECF Refugee

    Blog Posts:
    1
    Joined:
    Mar 31, 2016
    Messages:
    15,837
    I LOVE the authentic ones and have downloaded all the SXK clones

    Have tried the Shenray clone - it's pretty close to the authentic
     
  34. ModoJ

    ModoJ New Member

    Blog Posts:
    0
    Joined:
    Jul 21, 2017
    Messages:
    16
    Pulse 22 and Wasp Nano are my go to's at the moment. Tend to use the Wasp more often, as i get better flavor and I love the look of it.

    Sent from my LG-K428 using Tapatalk
     
    Heartsdelight likes this.
  35. Problemchild

    Problemchild Member For 1 Year

    Blog Posts:
    0
    Joined:
    Apr 22, 2016
    Messages:
    54
    Sounds like I need to get an authentic. The SXK clone is decent at best.
     
    Heartsdelight likes this.
  36. BrandonRawks

    BrandonRawks New Member

    Blog Posts:
    0
    Joined:
    Mar 3, 2017
    Messages:
    119
    Like JL said, the authentic is worth the money. But if you need to go clone, go shenray. It's pretty close to the authentic. Much more so than the SXK and others.
     
    Heartsdelight likes this.
  37. ☠Ƥʂұçħớ ŘêἁḺm☠

    ☠Ƥʂұçħớ ŘêἁḺm☠ Member For 1 Year

    Blog Posts:
    0
    Joined:
    Jun 22, 2016
    Messages:
    91
    There is NO better single-coil squonk RDA than Pulse 22.
     
  38. BrandonRawks

    BrandonRawks New Member

    Blog Posts:
    0
    Joined:
    Mar 3, 2017
    Messages:
    119
    Eh, different people have different preferences. Otherwise there would only be "the best" for sale with no reason to try anything else. I have two pulse 22's, and honestly I'm not really a fan. There are many others that I personally prefer over them. The pulse has way too much air for my liking, even closed down as much as you really can. I also don't get the flavor out of it that I easily achieve out of many of my other atomizers (no matter the coil size and position on the pulse).

    I can appreciate the fact that many love them. I'm just not one of those people. And it illustrates nicely how it makes no sense whatsoever to say *anything* is "the best" or that there is "nothing better". There is only "the best" for a particular person and their preferences.
     
  39. ieatOhms

    ieatOhms Silver Contributor ECF Refugee

    Blog Posts:
    0
    Joined:
    Mar 6, 2017
    Messages:
    624
    I’m with you on that. I own one as well and feel the same way as you. I did order the 24 in hopes that with dual coils it might be better.
     
    JuicyLucy and BrandonRawks like this.
  40. CrazyChef v2.0

    CrazyChef v2.0 Silver Contributor Unlisted Vendor

    Blog Posts:
    0
    Joined:
    Mar 13, 2017
    Messages:
    1,260
    I'm with you on the Gorge. It's my absolute favorite single coil RDA.
     
    MWorthington and gopher_byrd like this.
  41. Carambrda

    Carambrda Gold Contributor

    Blog Posts:
    0
    Joined:
    Feb 23, 2017
    Messages:
    1,554
    Fixed! ;)
     
  42. CrazyChef v2.0

    CrazyChef v2.0 Silver Contributor Unlisted Vendor

    Blog Posts:
    0
    Joined:
    Mar 13, 2017
    Messages:
    1,260
    I got a clone Deathwish from 3FVape. Piece of shit. The negative and positive posts will actually touch each other when clamped down on the coil leads. And I was planning on using it on a mech...
     
  43. Carambrda

    Carambrda Gold Contributor

    Blog Posts:
    0
    Joined:
    Feb 23, 2017
    Messages:
    1,554
    So get the authentic. ;)
     
  44. CrazyChef v2.0

    CrazyChef v2.0 Silver Contributor Unlisted Vendor

    Blog Posts:
    0
    Joined:
    Mar 13, 2017
    Messages:
    1,260
    Nah. Don't really have an interest in it. But I figured for $8 (or whatever it was) I'd give it a go.
     
  45. Carambrda

    Carambrda Gold Contributor

    Blog Posts:
    0
    Joined:
    Feb 23, 2017
    Messages:
    1,554
    But you didn't give it a go. To buy a clone = to fool yourself into thinking that you are giving it a go.
     
    EMusic and ieatOhms like this.
  46. MyVapeShop_SA

    MyVapeShop_SA VU Vendor VU Vendor New Member

    Blog Posts:
    0
    Joined:
    Jul 27, 2017
    Messages:
    40
    Is the Ammit an option for Squonking? The version 1 with single coil...?


    Owner of an Online Vape shop in South Africa : http://www.myvapeshop.co.za
     
  47. CrazyChef v2.0

    CrazyChef v2.0 Silver Contributor Unlisted Vendor

    Blog Posts:
    0
    Joined:
    Mar 13, 2017
    Messages:
    1,260
    Not true. Many of us will try a clone before laying down a larger chunk of cash for an authentic. Trust me - I have over 250 RDAs, RTAs, etc. - about a 50/50 mix of authentic and clones. I wasn't really interested purchasing one as it seemed too gimmicky, but the the deck piqued my interest because of it's uniqueness.
     
    JuicyLucy likes this.
  48. Carambrda

    Carambrda Gold Contributor

    Blog Posts:
    0
    Joined:
    Feb 23, 2017
    Messages:
    1,554
    I already know a lot of people try a clone. But these people still don't know what the authentic is like UNTIL they try the authentic so the reality is it simply doesn't matter that you have over 250 atomizers. Not too long ago another forum member complained the button on the Vaperz Cloud XXX tube mech mod is too stiff. But he obviously got the clone, and, on the authentic the button is not too stiff so still apples and oranges. I also already know clones are getting better, generally speaking, but in the end they're still only a hit or miss type thing so I don't judge the authentic based on someone's negative experience with the clone. Like I said I own the authentic. Serial number is 0018. Trust me, it's not gimmicky. Instead, it's a real gem. I am confident @raymo2u also agrees.

    horsemen5.jpg
     
    ieatOhms likes this.
  49. CrazyChef v2.0

    CrazyChef v2.0 Silver Contributor Unlisted Vendor

    Blog Posts:
    0
    Joined:
    Mar 13, 2017
    Messages:
    1,260
    It's still a gimmick, and what does Ray have to do with this?
     
    JuicyLucy likes this.
  50. Carambrda

    Carambrda Gold Contributor

    Blog Posts:
    0
    Joined:
    Feb 23, 2017
    Messages:
    1,554
    It's not a gimmick. It's called real innovation used ingeniously in conjunction with knowledge of traditional proven design principles. Ray is not only an extremely talented coil builder and coil artist, but also someone whose opinion I value a lot because Ray knows his shit.
     

Share This Page

Close This Message