New to rtda

[bikerchick]

hi, I’m new to rtda, I have a limitless plus rtda, on a Tesla mod.
Just trying some pre built coils, (fused Clapton) this is what it says on the lid...2x26g 38g 0.20.
I’m on a dual build. Can someone advise me as to approx wattage to go to with these?
Thanks

 

[Heartsdelight]

Is it .20 ohms for 1 or 2 coils? I would start at 38 watts & go up from there depending on your answer. Slowly start going up in wattage until you get the vape you like.

 

[bikerchick]

Is it .20 ohms for 1 or 2 coils? I would start at 38 watts & go up from there depending on your answer. Slowly start going up in wattage until you get the vape you like.

I have 2 coils, started at40 but nothing, is it safe at 70?

 

[bikerchick]

I have 2 coils, started at40 but nothing, is it safe at 70?

It’s showing on my mod, it’s 0.10 oms

 

[Heartsdelight]

I have 2 coils, started at40 but nothing, is it safe at 70?

Which mod are you using? And what resistance/ohm’s is the mod telling you?

 

[bikerchick]

Which mod are you using? And what resistance/ohm’s is the mod telling you?

It’s the Tesla the triangle shaped one

 

[Heartsdelight]

I see your ohms are .10. It should be safe depending on the mod you are using. But, I would go up in smaller increments rather then jump from 40 to 70 watts.

 

[bikerchick]

It’s the Tesla the triangle shaped one

Tesla WYE 200

 

[Heartsdelight]

Tesla WYE 200

Yes, it should be fine, I have one. I would as suggested above go up in smaller increments until you get the vape you like.

 

[Puneet]

I also use a limitless plus on a wolfgang VFeng
And my mod shows resistance at 0.23 and I vape it around 50-55 watts to get warm vape and good flavor. You need to experiment and find tour suitable temperature.


Sent from my iPhone using Tapatalk

 

[bikerchick]

Yes, it should be fine, I have one. I would as suggested above go up in smaller increments until you get the vape you like.

Think I’ve found my sweet spot, 70.
Thanks for your help.