Next Generation MTL tanks Part 2

Discussion in 'All Tanks / Factory Coils' started by fckaugust8th, Jun 1, 2016.

  1. Nailz

    Nailz FUCK the FDA VU Donator Gold Contributor Member For 3 Years

    Blog Posts:
    0
    Joined:
    Jun 26, 2014
    Messages:
    2,729
    My wife uses a authentic Kabuki and a clone she uses now, the only difference can tell between the 2, is the authentic seems to have a longer center pole, so can get more juice in it, but otherwise she can't tell the difference between them, I only got the authentic Kabuki, because it was a package deal with the radius that she also stole from me :huh:
     
    SkoldVape, Bigbob2322 and David Wolf like this.
  2. David Wolf

    David Wolf Bronze Contributor ECF Refugee

    Blog Posts:
    1
    Joined:
    Jul 5, 2017
    Messages:
    469
    yes, when I first took my SXK apart, I had to use the little screwdriver in the air slot (after removing the air flow ring) to get it apart. I lubed the oring when I filled it up, and the next time I took off the air flow ring, and used a paper towel to grip the base and got it lose by hand, I'm hoping as the PC threads wear some it will get easier, also I am going to try lubing the threads next time. Its not that hard though, just a bit fiddly. I can build on this deck even quicker than i can recoil a CLR coil, and those are that hard, and the flavor is worth it. I've ordered more of them, including extra spare tanks and o-rings. :)
     
    Nailz, SkoldVape and Bigbob2322 like this.
  3. SkoldVape

    SkoldVape Gold Contributor

    Blog Posts:
    0
    Joined:
    Apr 10, 2017
    Messages:
    1,728
    Women eh?? Think they own everything, the radius & kabuki setup is a classic.
    If I had enough money that beloved radius would be my main mod.
    I'd even be tempted to sell some of my mods to get one :p
     
    David Wolf and Nailz like this.
  4. SkoldVape

    SkoldVape Gold Contributor

    Blog Posts:
    0
    Joined:
    Apr 10, 2017
    Messages:
    1,728
    Easier to build than a CLR, fucking hell must be easy then! I have an ego one & a pack of CLR coils ordered. For £10.00 I thought I'd pick up another.
    Them CLR coils are as good as RTA'S I've used, specially for the price.
    Also didn't know the armor tank took them till recently so now that tank nay have some use!
     
    Nailz and David Wolf like this.
  5. David Wolf

    David Wolf Bronze Contributor ECF Refugee

    Blog Posts:
    1
    Joined:
    Jul 5, 2017
    Messages:
    469
    I probably should have said as easy as, however sometimes I have to work to get the clr coil lead in the slot pressed down to make good contact, with the big screws on the SXK doggy style it's a piece of cake. The Wismec Amor tank from Totally Wicked is the one that takes CL and CLR coils I have 4 of them:
    https://www.totallywicked-eliquid.com/wismec-amor-tank.html
    I get my 1.0 ohm CLR coils from Fasttech, authentic and cheap, worth the 2 week wait time. I use them once as they are then rebuild with 28 AWG 316L SS, 6 spaced wraps, 2.5mm, 0.6 ohms and vape at around 11 to 12W or 380-400F in temp control. Using the same SS build in my SXK doggy style, wicked with Cotton Bacon V2, and it's awesome :)
     
    Last edited: Aug 20, 2017
    Nailz, Bigbob2322 and SkoldVape like this.
  6. SkoldVape

    SkoldVape Gold Contributor

    Blog Posts:
    0
    Joined:
    Apr 10, 2017
    Messages:
    1,728
    My main build is a spaced clapton at 0.7 ohms & vaped at 15-18 watts.
    I've only just starting using TC, I bought a tank to try it out & I'm impressed so ill be buying some ss wire soon.
    That build your doing sounds okay, I will try it in my amor tank. If I'd of known it takes CLR coils sooner I would of been all over it. I've not actually rebuilt a CLR coil yet. I've been dry burning & washing them, using in my ego one & they just seemed to be lasting ages but I have some saved for when I wanna put my own build in.
    I've been using spaced claptons in my spiral tank lately at 0.7 ohms, was so impressed with flavour over past couple weeks I've not been using anything else.
     
    Nailz and David Wolf like this.
  7. Nailz

    Nailz FUCK the FDA VU Donator Gold Contributor Member For 3 Years

    Blog Posts:
    0
    Joined:
    Jun 26, 2014
    Messages:
    2,729
    Yea the setup was actually bought for myself, she doesn't care what mod or tank she has (normally), as long as it vapes.

    I only had the radius and kabuki for a day, she came home from work while I was sleeping, and her pico mod had started messing up, so she grabbed the radius, and never got back since :mad:

    But I'm more into RTA's anyway, and her having a reliable setup makes my life easier, but she has no idea she is holding a $230 setup, and not going to tell her either, most expensive setup I've ever bought, don't normally splash out, but know the radius is worth the money though.
     
    David Wolf, SkoldVape and Bigbob2322 like this.
  8. SkoldVape

    SkoldVape Gold Contributor

    Blog Posts:
    0
    Joined:
    Apr 10, 2017
    Messages:
    1,728
    Bummer about the pico, mines been reliable for a few months. What was up with it?? The nx75 is a better mod for a single 18650. Personally though I use a nx100 with a 26650 & the battery life is as good as a dual mod.
    It's also the best for accurate TC if your on a budget. Why mess about with artic fox if you can get a mod what works out the box.

    What RTA'S you rocking?? :)
     
    David Wolf and Nailz like this.
  9. Nailz

    Nailz FUCK the FDA VU Donator Gold Contributor Member For 3 Years

    Blog Posts:
    0
    Joined:
    Jun 26, 2014
    Messages:
    2,729
    I have a butt load, but in rotation right now are -
    Digiflavor siren
    Hussar
    Skyline
    Doggystyle
    Serpent SMM
     
    David Wolf, SkoldVape and Bigbob2322 like this.
  10. SkoldVape

    SkoldVape Gold Contributor

    Blog Posts:
    0
    Joined:
    Apr 10, 2017
    Messages:
    1,728
    Nice choices! I keep meaning to order the serpent :)
     
    Bigbob2322 and Nailz like this.
  11. Craig Mad Bricky

    Craig Mad Bricky Member For 3 Years

    Blog Posts:
    0
    Joined:
    Aug 24, 2014
    Messages:
    118
    I'm not having a good vape with my KF2 lite. Even with the screw out its a tight draw. Any ideas on how to open it up? thanks!
     
    David Wolf and SkoldVape like this.
  12. SkoldVape

    SkoldVape Gold Contributor

    Blog Posts:
    0
    Joined:
    Apr 10, 2017
    Messages:
    1,728
    I got myself a Kayfun V5 cos of how tight of a draw the lites were but hopefully someone will chime in an help. Cos kayfuns are hell expensive!
     
  13. Artemis

    Artemis Gold Contributor Member For 3 Years

    Blog Posts:
    0
    Joined:
    Jun 26, 2014
    Messages:
    3,173
    Anyone buy the Vandy vape berserker yet? Any decent reviews? I seen a few negative responses on a different forum. I'm just looking. :)
     
  14. Bigbob2322

    Bigbob2322 Gold Contributor Member For 1 Year ECF Refugee

    Blog Posts:
    0
    Joined:
    Apr 7, 2016
    Messages:
    2,288
    What forum, I'm thinking about getting one.
     
  15. Artemis

    Artemis Gold Contributor Member For 3 Years

    Blog Posts:
    0
    Joined:
    Jun 26, 2014
    Messages:
    3,173
    I googled reviews and it sent me to ecig forum. I think the problem is isolated to a particular vendor selling them. I will pm you a link.
     
    Bigbob2322 likes this.
  16. Bigbob2322

    Bigbob2322 Gold Contributor Member For 1 Year ECF Refugee

    Blog Posts:
    0
    Joined:
    Apr 7, 2016
    Messages:
    2,288
    Thank you. :)
     
    Artemis likes this.
  17. Nailz

    Nailz FUCK the FDA VU Donator Gold Contributor Member For 3 Years

    Blog Posts:
    0
    Joined:
    Jun 26, 2014
    Messages:
    2,729
    I got 2 coming, should be here tomorrow or Thursday, seen mostly positive reviews, but someone did complain about theirs from eciggity though, will update here when I get mine, got a silver and a black one coming :)
     
    Bigbob2322 and Artemis like this.
  18. Artemis

    Artemis Gold Contributor Member For 3 Years

    Blog Posts:
    0
    Joined:
    Jun 26, 2014
    Messages:
    3,173
    Thank you!
     
    Nailz and Bigbob2322 like this.
  19. Nailz

    Nailz FUCK the FDA VU Donator Gold Contributor Member For 3 Years

    Blog Posts:
    0
    Joined:
    Jun 26, 2014
    Messages:
    2,729
    Mine came today, no problems what so ever, great build quality on both, these are true MTL tanks, if someone can't get a tight enough draw with this, then they won't with anything :)

    [​IMG]
     
    R.Savage, KingPin!, SkoldVape and 3 others like this.
  20. Artemis

    Artemis Gold Contributor Member For 3 Years

    Blog Posts:
    0
    Joined:
    Jun 26, 2014
    Messages:
    3,173
    Thanks for the review. I MTL but I like a airy hit. Example: Nautilus 2 with airflow totally open. I assume this tank is tighter than the N2?
    P.S. I did read your review somewhere. :)
     
    Bigbob2322 and Nailz like this.
  21. Nailz

    Nailz FUCK the FDA VU Donator Gold Contributor Member For 3 Years

    Blog Posts:
    0
    Joined:
    Jun 26, 2014
    Messages:
    2,729
    I don't have a Naut 2, so can't compare, but the largest air hole on the berserker is 1.6mm, so even largest setting it is a tight draw, if you like airy, then this tank probably won't be to your liking.
     
    Bigbob2322 likes this.
  22. Artemis

    Artemis Gold Contributor Member For 3 Years

    Blog Posts:
    0
    Joined:
    Jun 26, 2014
    Messages:
    3,173
    Good to know and thanks! I saved some $$. I'm still looking for a newer tank. I have a Kayfun 5 but hate it. I do like the kayfun 3 mini but my screws rusted. Good quality clone? :)
     
    SkoldVape, Bigbob2322 and Nailz like this.
  23. Nailz

    Nailz FUCK the FDA VU Donator Gold Contributor Member For 3 Years

    Blog Posts:
    0
    Joined:
    Jun 26, 2014
    Messages:
    2,729
    Well know there is a new Digiflavor Siren V2 coming, so that might be good for you, it can be really tight air flow too, but can also open it more for a more airy hit.
     
    Bigbob2322 and Artemis like this.
  24. SkoldVape

    SkoldVape Gold Contributor

    Blog Posts:
    0
    Joined:
    Apr 10, 2017
    Messages:
    1,728
    *high five* on the tesla, I picked up one today :) 1505551993340.jpg
     
    Nailz and Bigbob2322 like this.
  25. Huckleberried

    Huckleberried Senior Moderator Staff Member Senior Moderator VU Donator Diamond Contributor Member For 3 Years

    Blog Posts:
    0
    Joined:
    Jul 3, 2014
    Messages:
    26,014
    Haven't seen a clone for this, but you might like the Geekvape Ammit. Easy build, more airflow than the Kayfun 5, good flavor.
     
    Artemis and Nailz like this.
  26. Artemis

    Artemis Gold Contributor Member For 3 Years

    Blog Posts:
    0
    Joined:
    Jun 26, 2014
    Messages:
    3,173
    The original or the 3D airflow version? Goggle is overwhelming....
     
  27. Huckleberried

    Huckleberried Senior Moderator Staff Member Senior Moderator VU Donator Diamond Contributor Member For 3 Years

    Blog Posts:
    0
    Joined:
    Jul 3, 2014
    Messages:
    26,014
  28. Artemis

    Artemis Gold Contributor Member For 3 Years

    Blog Posts:
    0
    Joined:
    Jun 26, 2014
    Messages:
    3,173
    Huckleberried likes this.
  29. BrewBear

    BrewBear Platinum Contributor Member For 1 Year

    Blog Posts:
    0
    Joined:
    Jul 23, 2016
    Messages:
    5,445
    Howdy y'all! It's been a while since I dropped by. I'm mostly squonking these days but MTL too. For bottom fed rda, look at Chalice3, Hellvape Viper v2, Cyclone v1. I have a few rta in rotation, all MTL, the Hussar with the 1.3mm tube and Origen Tiny are hitting the spot. The original Siren is good, but a bit too much air even on the lowest setting. On my list is the Berserker and possibly Siren v2.
    :vino:
     
  30. SkoldVape

    SkoldVape Gold Contributor

    Blog Posts:
    0
    Joined:
    Apr 10, 2017
    Messages:
    1,728
    Hope you are well :)

    The Berserker is great! Definitely recommend it. I tried the Kayfun V5 bit it was more like a restricted direct lung so I ordered a kayfun mini V3. These kayfuns are beginning to swallow my wallet though! Specially as you can get a good MTL atty cheap!
     
    David Wolf and Nailz like this.
  31. Nailz

    Nailz FUCK the FDA VU Donator Gold Contributor Member For 3 Years

    Blog Posts:
    0
    Joined:
    Jun 26, 2014
    Messages:
    2,729
    You should get the kayfun prime, got one few weeks ago, real great MTL tank, the prime and also berserker are my favs right now :)
     
    David Wolf, BrewBear and SkoldVape like this.
  32. SkoldVape

    SkoldVape Gold Contributor

    Blog Posts:
    0
    Joined:
    Apr 10, 2017
    Messages:
    1,728
    I was thinking about the prime actually, they have it on the same site I got my mini V3 too which means they'll deliver to the UK. I will think about getting it pay day :)
     
    BrewBear and Nailz like this.
  33. BrewBear

    BrewBear Platinum Contributor Member For 1 Year

    Blog Posts:
    0
    Joined:
    Jul 23, 2016
    Messages:
    5,445
    If I remember correctly, you like a slightly looser draw than I do. With that in mind, how tight a draw can you get?
     
    Nailz likes this.
  34. David Wolf

    David Wolf Bronze Contributor ECF Refugee

    Blog Posts:
    1
    Joined:
    Jul 5, 2017
    Messages:
    469
    Sorry I didn’t see an alert on your post. I haven’t tried to get more air flow on the V2 so don’t have any tricks other than if memory serves me right back the airflow screw out (unless I’m thinking about another model, been a while since I used it. The V5 has much more air flow so that might be better for you,it’s too much for me.
     
  35. Nailz

    Nailz FUCK the FDA VU Donator Gold Contributor Member For 3 Years

    Blog Posts:
    0
    Joined:
    Jun 26, 2014
    Messages:
    2,729
    Prime and Berserker you can really dial down to a very tight draw. on the prime I have it on the 2nd biggest hole, the berserker have on the biggest and they are still pretty tight draws for me.

    I believe both can dial down to a 0.8mmm are hole.
     
    SkoldVape likes this.
  36. SkoldVape

    SkoldVape Gold Contributor

    Blog Posts:
    0
    Joined:
    Apr 10, 2017
    Messages:
    1,728
    I got my prime a couple days ago after a recommendation from you ;) thanks dude it's a perfect MTL vape. Swallowed half of my money but it's a fucking good vape for sure!!!!
     
    Nailz likes this.
  37. SkoldVape

    SkoldVape Gold Contributor

    Blog Posts:
    0
    Joined:
    Apr 10, 2017
    Messages:
    1,728
    Get an obs engine and put a 0.6 build in and vape it at 25 watts. Won't be a tight draw but will be a good MTL vape :)
     
    DWDawg and Artemis like this.
  38. SkoldVape

    SkoldVape Gold Contributor

    Blog Posts:
    0
    Joined:
    Apr 10, 2017
    Messages:
    1,728
    Merlin mini can give a loose MTL too!
     
    Artemis likes this.
  39. Artemis

    Artemis Gold Contributor Member For 3 Years

    Blog Posts:
    0
    Joined:
    Jun 26, 2014
    Messages:
    3,173
    Thanks! I might check it out. I like a airy hit.
     
  40. snake94115

    snake94115 Platinum Contributor Member For 2 Years

    Blog Posts:
    0
    Joined:
    Nov 5, 2015
    Messages:
    7,694
    Who makes (the prime)?
     
  41. dgproduction

    dgproduction New Member

    Blog Posts:
    0
    Joined:
    Aug 20, 2017
    Messages:
    2
    Svoemesto

    Sent from my SM-G925F using Tapatalk
     
  42. BrewBear

    BrewBear Platinum Contributor Member For 1 Year

    Blog Posts:
    0
    Joined:
    Jul 23, 2016
    Messages:
    5,445
    The Kayfun Prime is made by SvoeMestro, but SXK and a couple others make the Prime Styled!!!
     
  43. snake94115

    snake94115 Platinum Contributor Member For 2 Years

    Blog Posts:
    0
    Joined:
    Nov 5, 2015
    Messages:
    7,694
    You know what comes next right?
    Yep me asking for a link to a good 1...Cheers!
     
    SkoldVape likes this.
  44. SkoldVape

    SkoldVape Gold Contributor

    Blog Posts:
    0
    Joined:
    Apr 10, 2017
    Messages:
    1,728
    I got mine from cremedevape but it's not a cheap site. I'm in the UK too and hate waiting from China etc...
     
  45. Huckleberried

    Huckleberried Senior Moderator Staff Member Senior Moderator VU Donator Diamond Contributor Member For 3 Years

    Blog Posts:
    0
    Joined:
    Jul 3, 2014
    Messages:
    26,014
    I saw the Prime at 3Fvape, in the New Posts here, a couple days ago. A new to us vendor called Vapercoil, or something has them, too. 3Fvape had the better price. It's a 2ml there. Don't know if they make a bigger one, didn't investigate it too much.
     
  46. zombievapereview

    zombievapereview Bronze Contributor

    Blog Posts:
    0
    Joined:
    Oct 18, 2017
    Messages:
    251
    I can't wait I'm getting my girlfriend a berserker. This will be her 2nd vape ever. Imo first real vape and I want to do it right... Mostly so she will stop smoking cigarettes I love kissing her but good damn I can't stand that smoker taste. But I love her so I deal with it.

    Sent from my Z981 using Tapatalk
     
    snake94115 likes this.
  47. mach1ne

    mach1ne Silver Contributor Member For 1 Year

    Blog Posts:
    0
    Joined:
    Feb 18, 2016
    Messages:
    757
    has any word come in regarding the 'best' kf prime clone? i see kindbright, sxk, yftk (all usually pretty good) and a couple no-name versions between ft and 3fv.

    also, anyone heard anything at all about the hastur mtl by cthulhu? or their mtl rda?
     
  48. KY_Rob

    KY_Rob Bronze Contributor Member For 3 Years

    Blog Posts:
    0
    Joined:
    Jul 10, 2014
    Messages:
    307
    Anyone tried the Siren 2 yet? Looks promising to me...
     
    Nailz likes this.
  49. Nailz

    Nailz FUCK the FDA VU Donator Gold Contributor Member For 3 Years

    Blog Posts:
    0
    Joined:
    Jun 26, 2014
    Messages:
    2,729
    Ordered the 24mm siren 2 last night from eciggity, so guessing I will have one Monday/Tuesday next week :)
     
    KY_Rob and Bigbob2322 like this.
  50. CDroverNL

    CDroverNL Silver Contributor Member For 1 Year

    Blog Posts:
    0
    Joined:
    Jan 11, 2016
    Messages:
    812
    Vic has a review up for the rda for sure. I know I seen him with the new rta but I don't know if he has the video up for it yet. He gives the mtl rda a horrible review

    Sent from my LG-H831 using Tapatalk
     
    mach1ne likes this.

Share This Page

Close This Message