Become a Patron!

Paratech

I forgot
VU Donator
Gold Contributor
Member For 4 Years
The Uwell Valyrian
GBu8lDL.jpg


Drip Tip:
17mm tall
16mm OD tapering down to 14mm
12mm ID tapering to 7.65mm
Will stand 12.1mm above the tank
No O-rings on the 510, this is a friction fit tip
Drip Tip Pics:
jNq0QnD.jpg

LhrUmeF.jpg

5LYtdOA.jpg

This size works perfectly fine for me.
Stays locked in place rather well too.
Not so much you can't remove it but the friction fit is doing its job.

Top Cap:
First, this is one bad ass top cap
21.7mm tall
23.9mm OD at the portion of the cap that opens
25.15mm OD at the base of the top cap
10.7mm OD chimney section
There are two fill ports measuring 7mm X 3.75mm
Double O-rings to seal the glass that are colored to match the tank
Top Cap Pics:
E1pRA25.jpg

no1Im4B.jpg

iNFQil7.jpg

odwsNtq.jpg

nZFCmdj.jpg

9jR6aOk.jpg

9eZQAd9.jpg

NOTE; there is a PUSH button on the front.
Simply press this to open the cap for fill ups.
It's a thirsty tank so you'll be used to it in no time.
The delrin covering the top does a great job of keeping your lips from the potential of any heat that may be generated during vaping.

Glass:
25.77mm tall
25mm OD
Glass Pic:
SkQZogW.jpg


Base:
19.25mm tall
25mm OD at bottom ring
25.9mm at knurling
There are three air flow holes measuring 11mm X 2.65mm
The AFC has a full stop for open/close
While it is buttery smooth, it stays in place very well
Base Pics:
4xMAPJi.jpg

r5DcPLS.jpg

qEKBmzD.jpg

nE5h7m9.jpg


Assembled Tank:
63.35mm tall
Tank Pic:
mbwi6XM.jpg
 

Paratech

I forgot
VU Donator
Gold Contributor
Member For 4 Years
Installed coil:
0.15Ω (95 - 120W)
The bottom connecting ring is gold plated
Coil Pics:
2ed1gkz.jpg

CU3hvuX.jpg

k6i1oVS.jpg

Owg7OeB.jpg

Tw08Xbv.jpg

mp6Tl8j.jpg

They really need an RBA section.
I think that would top this tank.

There are three PINS:
The spiral pin is recommended for 95 - 105W
The wave pin is recommended for 100 - 120W
The unrestrictive pin is also recommended for 100 - 120W
Pin Pic:

Spare Parts:
Extra pyrex glass
Extra 0.15Ω coil (recommended at 95 - 120W)
Extra O-rings
Extra drip tip
The spiral and wave pin
User manual
Drip tip cover
Spare Parts Pics:

Packaging Pics:
3nOxTEG.jpg

There is a small tab in the top of the cap that holds the tank on place, great job Uwell
CGrTzuW.jpg

sOoWQk2.jpg

dh7nrgD.jpg

Ku2nmTt.jpg

l1qwS2H.jpg

2XKRVxW.jpg

fb5rC5T.jpg

oNPe0S2.jpg

Wrsw6oG.jpg

BUAEOuD.jpg

pJVy4lb.jpg

ncSAja7.jpg
 

Paratech

I forgot
VU Donator
Gold Contributor
Member For 4 Years
********************************************************************************************************************
The two sections below cover my normal testing procedure and preface.
I feel this is important information to include so you know what I do to ensure I test everyone the same way.
It also provides you info on MY particular juice because it is more than likely different than yours so it can/will have different results.
********************************************************************************************************************
Airflow wide open for both coil tests.
Before testing each coil I ensured proper saturation as well as break the coils in by starting at lower wattages and temps.
I vape at these lower wattages, slowly increasing and I vape though half to a full tank fill depending on what the coil needs.
Once the coils are properly broke in I start my tests.
For each wattage setting I took 10 casual pulls taking them as I felt the need.
Followed by 10 chain vape pulls to check for heat and flavor changes.
I Wait 5 minutes between each setting (allowing the coil to cool) to ensure I get the best the coils can produce.
After documenting all notes through this process, I proceed to vape through 240ml of juice for each coil to check coil life.
********************************************************************************************************************
This may not seem news worthy to some but since high flavor percentages and really sweet juices kill coils, I check for it.
Mostly because I use 25% flavor of super sweet DIY juice and go through about 45ml per day.
My juice is a well-known coil killer.
Generally, I get only a few days out of coils so I'm always in search of the few that can last though my particular juice.
Clouds are clouds, I could care less.
Flavor on the other hand is where the importance to me is so that'll be my main objective.
********************************************************************************************************************

Airflow wide open:
(Uwell recommends air flow to be wide open if using recommended wattage, if you want to close the air flow down they suggest also reducing the wattage)
Including priming the coil I was able to fit 6.5ml of juice in.
The 0.15Ω is rated for 95 - 120W
Starting with the "unrestrictive type pin" that is recommended at 100 - 120W
NOTE; "unrestrictive" DEFINITELY means LOTS of air, LOTS! It is like breathing through a piece of 3" PVC tubing.
80 - Massive clouds, very little flavor
85 - Same massive clouds, almost a touch of flavor
90 - No noticeable change from 85W
95 - Flavor is just now starting to come in
100 - Small amount of juice guzzling flavor, still massive clouds
105 - Slight increase in flavor, juice temp remaining cool
110 - Good flavor and huge clouds but doesn't match the excessive airflow
115 - Just doesn't seem to be improving on flavor amount
120 - Still not much improvement
125 - Now we start getting a little flavor
130 - The most amount of flavor this thing has produced yet
Kept it at 130W and vaped 240ml.

With the "spiral type pin" that is recommended at 95 - 105W
NOTE; Changing to this pin did help restrict the air flow to an easier to manage volume.
80 - No flavor here, just clouds
85 - More clouds, little flavor
90 - No change
95 - ""
100 - ""
105 - ""
110 - ""
115 - Still producing massive clouds, just weak on flavor
120 - The flavor point here is acceptable but not what I expected
125 - More flavor but now wondering what my juice is going to do to the coil
130 - THIS is where the flavor should have been 5 settings ago, NICE
Kept it at 130W and vaped 240ml.

With the "wave type pin" that is recommended at 100 - 120W
NOTE; Changing to this pin seems to be about half way between the "unrestrictive" and "spiral type pin" as far as air flow goes.
80 - Fair clouds, lacking flavor
85 - Lot more clouds, very little flavor change
90 - Plenty of clouds, flavor starting to come in
95 - No noteworthy change
100 - Huge clouds, flavor slightly improving
105 - Clouds are more thick than before, flavor same as 100
110 - Slight increase in flavor
115 - A little more flavor but whistle is getting more annoying
120 - This juice guzzling tank is getting pretty close to where I want it for flavor
125 - This seems pretty nice but I can't see my screen through the fog
130 - Same as with the "spiral" pin, this is the setting that works best for me
Kept it at 130W and vaped 240ml.
One unfortunate observation is with this pin there is now an annoying whistle.

* No leaks, seeping, or issue of any kind.
Very well build solid tank that seems like it will cover the needs for any vaper that like airy tanks that produce a LOT of clouds and some great flavor.
While chain vaping tank does get pretty warm.
Mod gets a slight bit of heat transfer but none to drip tip.

Features & Specs:
•Utilizes 0.15Ω quadruple coils
◦Massive wicking intakes
◦Power range: 95W to 200W (depending on installed coil pin)

•Included: three coil pin options for different flavor & vapor output
◦Spiral pin: 95W to 105W
◦Unrestricted pin: 95W to 200W
◦Wave pin: 100W to 120W

•Massive adjustable airflow
•5ml tank reservoir
◦Button flips open top cap
◦Hinged top fill system
◦8ml tank tube available (not included)
NOTE: I am not familiar with this site and the picture doesn't look right but this is the only source I have found so far:
http://www.ecigcrib.com/Uwell-Valyrian-Glass-8ml-p/1713453.htm
Uwell Valyrian Glass 8ml
Product Code: 1713453
$4.95
At the time of this posting they claimed to have 41 pieces available.

•510 threaded connection

•Weight: 62.2g
•Construction materials
◦Pyrex glass tank
◦Stainless steel/copper body

•Colors Available:
◦Black
◦Iridescent
◦Sapphire Blue
◦Stainless
◦Violet

•Contents:
◦2 x 0.15Ω quad coils
◦2 x drip tips
◦3 x coil pins
◦Drip tip cover
◦Extra tank tube
◦Spare rubber O-rings (different colors)
◦User manual
◦Valyrian Tank

Each tank color option comes with two choices of O-Rings:
◦Black - Red and Green
◦Iridescent - Green and Royal Purple
◦Sapphire Blue - Orange and Blue
◦Stainless - Orange and Black
◦Violet - Pink and Royal Purple

Each tank color option comes with two choices of drip tips:
◦Black - Red and Grass Green
◦Iridescent - Grass Green and Purple
◦Sapphire Blue - Orange and Blue
◦Stainless - Orange and Gold
◦Violet - Purple and Purple (yes, the exception)
 

Paratech

I forgot
VU Donator
Gold Contributor
Member For 4 Years
What the Uwell Valyrian looks like on a few mods:

p7c7DfZ.jpg

Smok H Priv

CPZLPyE.jpg

Smok T-Priv

DJbVfAk.jpg

Smok ProColor

kxhHsOU.jpg

Smok G-Priv

onVjvYa.jpg

Smok GX350

OZnVRJn.jpg

Ijoy Captain PD270

R7RUOk0.jpg

Ijoy Genie PD270

b6NIpIW.jpg

Ijoy Maxo

dC5g48r.jpg

Laisimo L3

BAarHDV.jpg

HohmTech HohmWrecker G2

oXPd5dT.jpg

Sigelei Fuchai 213

RFBPHMI.jpg

Smoant Battlestar

0VlCXq9.jpg

Wismec Reuleaux RX2/3

CRfy71D.jpg

Pioneer4You IPV6X

R5R6ASl.jpg

Teslacigs WYE200W

ji3sdOY.jpg

Hell's Gate Touch 200

QCjrlpi.jpg

DigiFlavor DF200

aQsrEEB.jpg

Geek Vape Aegis

B2bkNFO.jpg

Smoant Charon TS 218

RqhahQ8.jpg

Vaptio N1 Pro
 
Last edited:

VU Sponsors

Top