Become a Patron!

Paratech

I forgot
VU Donator
Gold Contributor
Member For 4 Years
Vaptio/Viva Kita sent this for the purpose of this review.

dP4EzN4.jpg

WQE7eqZ.jpg

Nl41HhW.jpg

Xmm00bl.jpg

8vNHdHY.jpg

Swdw9KP.jpg

QVUCvBv.jpg

YAbB7MZ.jpg

GIhPlWP.jpg

VXsfQJD.jpg

Y0nMwzq.jpg

XhpKyLj.jpg

EMnhw6n.jpg

LJQJUM4.jpg

Y8hDBg9.jpg

NWStvo6.jpg

HpOlAaP.jpg

o4JZKcF.jpg

6ZBS5T5.jpg

93ghiy4.jpg
 
Last edited:

Paratech

I forgot
VU Donator
Gold Contributor
Member For 4 Years
8L3CuTG.jpg

SiHTLxM.jpg

3xPHyGc.jpg

IaKyEPY.jpg

dKAbDSz.jpg

U6hu1Ht.jpg

g0xYkYD.jpg

EN7pkLX.jpg

U6JH1Dy.jpg

UfoaSa7.jpg

IS4gZFp.jpg


Like almost all others, press the fire button 5 times to power it on.
There are three power settings;
Low (30W) light around fire button will light red when pressing
Medium (40W) light around fire button will light blue when pressing
High (50W) light around fire button will light white when pressing
{if you forget this, it is on the side next to fire button}
To change simply press the fire button 3 times within 2 seconds.

****************************************************************************************************************************************
The two sections below cover my normal testing procedure and preface.
I feel this is important information to include so you know what I do to ensure I test every one the same way.
It also provides you info on MY particular juice because it more than likely different than yours sol can/will have different results.
****************************************************************************************************************************************
Airflow wide open for both coil tests.
Before testing each coil I ensured proper saturation as well as break the coils in by starting at lower wattages and temps.
I vape at these lower wattages, slowly increasing and I vape though half to a full tank fill depending on what the coil needs.
Once the coils are properly broke in I start my tests.
For each wattage setting I took 10 casual pulls taking them as I felt the need.
Followed by 10 chain vape pulls to check for heat and flavor changes.
I Wait 5 minutes between each setting (allowing the coil to cool) to ensure I get the best the coils can produce.
After documenting all notes through this process I proceed to vape through 240ml of juice for each coil to check coil life.
****************************************************************************************************************************************
This may not seem news worthy to some but since high flavor percentages and really sweet juices kill coils, I check for it.
Mostly because I use 25% flavor of super sweet DIY juice and go through about 45ml per day.
My juice is a well known coil killer.
Generally I get only a few days out of coils so I'm always in search of the few that can last though my particular juice.
Clouds are clouds, I could care less.
Flavor on the other hand is where the importance to me is so that'll be my main objective.
****************************************************************************************************************************************
I tested both the supplied coils for 240ml each.
When I removed the coils they still seemed to have plenty of life left.
Seems to be pretty durable and of good quality.

When my wife uses this she covers one air hole with a piece of tape or her finger since she is a MTL vaper.
She also uses it on low (30W)
When I use it, being a DL vaper, I just leave it as open designed.
I set it at high (50W)
This seems like a well rounded vapor/flavor combination that provides a suitable amount of what you'll need and want for a pleasant vaping experience.
I'm actually liking it a bit more than I expected.
While it is not comparable to a Steam Crave Aromamizer Plus with 3x26ss+36ss 4mm ID 6 wrap coils @ 0.1Ω on a Vaptio N1 Pro @ 110 watts or 520°, it is still producing plenty of flavor and vapor to sooth the vape crave.
It is certainly a more restrictive draw, it still provides plenty of a hit to complete the task.
 
Last edited:

Paratech

I forgot
VU Donator
Gold Contributor
Member For 4 Years
There is a 10 minute timer that auto shuts off the device to conserve power.
Using the supplied 0.25Ω coils:

DCiUNvY.jpg

fNKktOO.jpg

pEExBQi.jpg

821G29F.jpg

anGtso7.jpg

IxR5QW0.jpg

N1hHmEX.jpg

HGNXw9I.jpg


Drip Tip:
17mm tall
24.5mm OD at widest point
1mm ID tapering to 5.2mm
14mm OD tapering to 16mm
The top portion of the drip tip will come out and you can replce it with your own choice of 510 drip tips.

tVU187Y.jpg

FD6JwMN.jpg

nfYuIZI.jpg

xIp3svx.jpg

YvpvDsL.jpg

ahwWzSw.jpg


Top Cap:
14.2mm tall
24.5mm OD
Chimney is 5mm ID
There are two fill ports measuring 7mm X 4mm
Under the fill holes there is a gasket that prevents the tank from leaking.
During fill up you need to push the tip of the bottle through this.

u3VRkhU.jpg


Glass:
16.5mm tall
24.5mm OD
 
Last edited:

Paratech

I forgot
VU Donator
Gold Contributor
Member For 4 Years
l8vKLPD.jpg

Qsjl0s1.jpg

fWbTjzL.jpg

szwBWnK.jpg

NiPG0Gh.jpg

1pzQvQV.jpg

C50haUw.jpg

1k5dHa9.jpg

Ee1VnDT.jpg

WEyVxpm.jpg

UgLoQQu.jpg

BjPy7Z7.jpg


Mod:
89.6mm tall
24.5mm OD
Where the coil threads in is 11.7mm deep
There is a raised section where the coil threads on that stands 2.7mm above the mod and is 21.12mm OD
Additionally there are a pair of airflow slots measuring 9mm X 2mm that are not adjustable.
3000mAh battery

WSZHK8B.jpg


Overall Height:
123.8mm
 
Last edited:

VU Sponsors

Top