Post your builds

Discussion in 'Coil Building' started by Vape_geek, Jun 25, 2014.

  1. champton

    champton Bronze Contributor

    Blog Posts:
    0
    Joined:
    Apr 3, 2017
    Messages:
    159
    I would suggest starting out with Kanthal. It's easiest to work with. Stainless steel coils are more for vaping in temperature control mode.
     
  2. raymo2u

    raymo2u VU Donator Platinum Contributor Member For 2 Years Unlisted Vendor

    Blog Posts:
    0
    Joined:
    May 31, 2015
    Messages:
    8,992
    If I didnt know any better Id sell your pitching coil sales to a Builders thread....

    Next time try selling try advertising canned air...

    If your serious then I wouldnt ask those questions here, I would start a thread in either the Rebuildables sub forum or HERE
     
    Last edited: Sep 11, 2017
    KingPin! and KarmicRage like this.
  3. raymo2u

    raymo2u VU Donator Platinum Contributor Member For 2 Years Unlisted Vendor

    Blog Posts:
    0
    Joined:
    May 31, 2015
    Messages:
    8,992
    Alien Tsuka Build in the Aeronaut V2.5 RDA (Mostly SS Ribbon/Frames)

    Hope you guys appreciate the colors...Survey says the really close shot is my best picture so far.

    [​IMG] [​IMG] [​IMG] [​IMG] [​IMG] [​IMG] [​IMG]
     
  4. Thatch760

    Thatch760 New Member

    Blog Posts:
    0
    Joined:
    Jul 29, 2017
    Messages:
    23
    IMG_1456.JPG 3x30/40n80 6 wraps 3mm .27 ohms
     
    mach1ne, Cormic, KingPin! and 2 others like this.
  5. Dustyjeans

    Dustyjeans Bronze Contributor

    Blog Posts:
    0
    Joined:
    Jan 18, 2017
    Messages:
    414
    I agree definetly on of your best. Holy focus stacking! How many frames are in that second pic? I can see the machine marks on the bottom of the juice well!!!

    Sent from my SM-G920V using Tapatalk
     
    KarmicRage likes this.
  6. raymo2u

    raymo2u VU Donator Platinum Contributor Member For 2 Years Unlisted Vendor

    Blog Posts:
    0
    Joined:
    May 31, 2015
    Messages:
    8,992
    Well most of these shots are between 30-120 shots...the juice well on the Aeronaut is almost 12mm deep...so Id wager its around 90+ for that one
     
    Dustyjeans likes this.
  7. KarmicRage

    KarmicRage Bronze Contributor

    Blog Posts:
    0
    Joined:
    Jul 13, 2017
    Messages:
    217
    Beautiful work Raymo. Was watching some ohm boy josh coil wars videos and heard your name dropped, can definitely say your work is some of the best I've seen. Keep it up la

    Sent from my HTC One X using Tapatalk
     
    raymo2u likes this.
  8. champton

    champton Bronze Contributor

    Blog Posts:
    0
    Joined:
    Apr 3, 2017
    Messages:
    159
    You guys got me started with parallels now.

    DSCN0491.JPG
     
    mach1ne, Cormic, KarmicRage and 3 others like this.
  9. Thatch760

    Thatch760 New Member

    Blog Posts:
    0
    Joined:
    Jul 29, 2017
    Messages:
    23
    IMG_1465.JPG IMG_1468.JPG 4x30/36n80 5 wraps 2.5mm .12ohms an 3mm
     
    Last edited: Sep 13, 2017
    mach1ne, Cormic, KingPin! and 3 others like this.
  10. Thatch760

    Thatch760 New Member

    Blog Posts:
    0
    Joined:
    Jul 29, 2017
    Messages:
    23
  11. Jonnystevenson

    Jonnystevenson New Member Unlisted Vendor

    Blog Posts:
    0
    Joined:
    Jan 24, 2017
    Messages:
    86
  12. BKTOAD

    BKTOAD Silver Contributor Member For 1 Year

    Blog Posts:
    0
    Joined:
    Mar 3, 2016
    Messages:
    762
    Dual verticals framed staples. Beat that!

    [​IMG][​IMG]

    Had a rda sleeve get stuck. Had to sacrifice the coils.
     
    mach1ne, KingPin!, Cormic and 5 others like this.
  13. BKTOAD

    BKTOAD Silver Contributor Member For 1 Year

    Blog Posts:
    0
    Joined:
    Mar 3, 2016
    Messages:
    762
    Replaced my vertical coils with this. First successful 40g alien wrap. A little overstretched, spaced on purpose.

    [​IMG][​IMG][​IMG][​IMG]
     
    mach1ne, KingPin!, Thatch760 and 4 others like this.
  14. twan013

    twan013 Bronze Contributor

    Blog Posts:
    0
    Joined:
    Apr 9, 2017
    Messages:
    307
    But how does she vape? Lol

    Sent from my SM-G955U using Tapatalk
     
    BKTOAD likes this.
  15. champton

    champton Bronze Contributor

    Blog Posts:
    0
    Joined:
    Apr 3, 2017
    Messages:
    159
    What...the...fuck?!
     
  16. Drake m

    Drake m New Member

    Blog Posts:
    0
    Joined:
    Jun 10, 2017
    Messages:
    25
    First attemp at catapiler tracks 20170713_172110-1.jpg Screenshot_2017-07-13-17-57-56_1499986705855.jpg
     
  17. CrazyChef v2.0

    CrazyChef v2.0 Silver Contributor Unlisted Vendor

    Blog Posts:
    0
    Joined:
    Mar 13, 2017
    Messages:
    537
    Nice! But why the funky install?
     
  18. Drake m

    Drake m New Member

    Blog Posts:
    0
    Joined:
    Jun 10, 2017
    Messages:
    25
    It wouldnt ohm right the norm way so said screw it and threw a couple more wraps to the other side and made them vertical. Made it work insdead of giving up haha
     
    KarmicRage and CrazyChef v2.0 like this.
  19. CrazyChef v2.0

    CrazyChef v2.0 Silver Contributor Unlisted Vendor

    Blog Posts:
    0
    Joined:
    Mar 13, 2017
    Messages:
    537
    Yeah, after I asked I started thinking that maybe it was for increased resistance. Nice save!
     
    raymo2u and KarmicRage like this.
  20. AkheemDixon

    AkheemDixon New Member

    Blog Posts:
    0
    Joined:
    Sep 14, 2017
    Messages:
    2
    What was the diameter
    Yes very clean
     
    raymo2u likes this.
  21. AkheemDixon

    AkheemDixon New Member

    Blog Posts:
    0
    Joined:
    Sep 14, 2017
    Messages:
    2
    Oh that's pretty!! Next build I make for sure! Thanks for posting
     
    raymo2u likes this.
  22. Thatch760

    Thatch760 New Member

    Blog Posts:
    0
    Joined:
    Jul 29, 2017
    Messages:
    23
    IMG_1542.JPG IMG_1544.JPG IMG_1546.JPG 4x28/36-2x26-36n80 .08ohms
     
  23. champton

    champton Bronze Contributor

    Blog Posts:
    0
    Joined:
    Apr 3, 2017
    Messages:
    159
    Nice work. Do I see twisted frames on your ribbon, or is it just me?
     
  24. raymo2u

    raymo2u VU Donator Platinum Contributor Member For 2 Years Unlisted Vendor

    Blog Posts:
    0
    Joined:
    May 31, 2015
    Messages:
    8,992
    Getting backed up again...

    Staple Core SSFC

    [​IMG] [​IMG] [​IMG] [​IMG] [​IMG] [​IMG] [​IMG]


    CoilArt Ultem DPRO, just some 4 Core Aliens (4x28g SS) slapped inside.

    [​IMG] [​IMG] [​IMG] [​IMG] [​IMG] [​IMG]

    Now Some SS Alien Staggertons in the Recoil Rebel:


    [​IMG] [​IMG] [​IMG] [​IMG] [​IMG] [​IMG] [​IMG]
     
    mach1ne, Carambrda, Cormic and 3 others like this.
  25. Mechman4Ev

    Mechman4Ev New Member

    Blog Posts:
    0
    Joined:
    Wednesday
    Messages:
    11
    IMG_4625.JPG IMG_4618.JPG Hey guys
    Im brand new to the site. Ive been vaping and building for about 6 months. I have a bunch of mods, regulated and mechanical. I am finding my niche in the squonking world for sure. For squonkers, I have a lost vape therion bf and a coppervape mech squonk, love them both but finding my mechs to be the most satisfying and gratifying. Just got this pulse 22 bf atty to add to my single coil flavor attys, among them are narda, hadaly, the flave and lil origen. This pulse 22 is really killing it, giant clouds with stellar flavor. Settingthe coil up high really lets this baby shine. Here is the latest build, all kanthal clapton 26/32 paralleled with 24g. 3mm ID 4 wraps ohms out at .24. Love my single coil attys, narda and the flave are just as great. No matter what, I just cannot get the flavor out of any of my dual coil setups. Anyways, thought I'd share because this baby is amazing on my mech squonk. Hard to beat so far.
     
  26. Wtmke1

    Wtmke1 Bronze Contributor Member For 1 Year

    Blog Posts:
    0
    Joined:
    Sep 25, 2015
    Messages:
    362
    Parallel 26 in at .21 [​IMG]

    Sent from my Nexus 6P using Tapatalk
     
  27. BKTOAD

    BKTOAD Silver Contributor Member For 1 Year

    Blog Posts:
    0
    Joined:
    Mar 3, 2016
    Messages:
    762
    Framed staples 2x28k 8x.3k 40ss

    [​IMG][​IMG]
     
    Thatch760, mach1ne, raymo2u and 2 others like this.
  28. BKTOAD

    BKTOAD Silver Contributor Member For 1 Year

    Blog Posts:
    0
    Joined:
    Mar 3, 2016
    Messages:
    762
  29. Eddie2934

    Eddie2934 New Member

    Blog Posts:
    0
    Joined:
    Wednesday
    Messages:
    5
    I see a lot of really nice builds wish I had time to put into my coils like that
     
    raymo2u likes this.
  30. Wtmke1

    Wtmke1 Bronze Contributor Member For 1 Year

    Blog Posts:
    0
    Joined:
    Sep 25, 2015
    Messages:
    362
    Quad 26[​IMG]

    Sent from my Nexus 6P using Tapatalk
     
    mach1ne and raymo2u like this.
  31. BKTOAD

    BKTOAD Silver Contributor Member For 1 Year

    Blog Posts:
    0
    Joined:
    Mar 3, 2016
    Messages:
    762
    Not sure what happened, but made my first set of alien-ed staples. One wrapped nicely. The other opened up like a spring after wrapping. Same method same care. Any advice on how to un-spring it so it will fit in a 24mm rda and still look decent? Or scrap it and make another?

    10x.4k/36ss

    [​IMG][​IMG]
     
    raymo2u, Thatch760 and mach1ne like this.
  32. raymo2u

    raymo2u VU Donator Platinum Contributor Member For 2 Years Unlisted Vendor

    Blog Posts:
    0
    Joined:
    May 31, 2015
    Messages:
    8,992
    Glad to see alot of new faces in here and some of the older faces still around!

    Glad your enjoying it...mine sits on the shelf...I like alot of heat and a saturated vape so most single coil RDAs dont really give me that unless I put in dual coils in the single coil RDAs....I really wish I could get that same experience...it can become close but then the cotton dryhits quickly....

    I am however a big Squonking fan...currently have 3 squonkers in my possession and 8 more in transit..Im also a big mech/Parallel box/Tube fan, only regulated mod Ive enjoyed is the Hohm Wrecker G2 (because its power delivery is in RMS and is mech-like and fires down to .007 Ohms).
    One of my favorite Squonk RDAs is a clone believe it or not. Its Authentic counterpart doesnt allow a bottom feeder pin. Its the YFTK Reload V1.2 RDA from 3fvape. ITs chamber is pretty small and the way it points the coils and has them almost touching each other over bottom airflow the vape is fantastic and you dont need a lower resistance build to get the vape I like...3 or 4 core SS aliens (4 Wraps/3mm ID) will do better then fine in it and its around $15. I love it on my Boxer BF (I did have to used a insulator from a different RDA as the boxer doesnt have a adjustable 510)...but its one of my ULTIMATE SETUPS and I feel the same way, where I want to shove it in everyones face to look and try it...

    [​IMG] [​IMG]

    Another ULTIMATE RDA is a Gorge RDA Ultem topcap on any of these decks (TM24/Goon V1-1.5/Skywalker/Conspiracy). The Skywalker is only $15 on 3fvape and the Gorge is $20 and it offers a metal and ultem cap to use...Id pay the $20 just for one of these caps. The magic of it is is reduced chamber. It makes any of these the size of the Goon LP but utilizes the decks you choose, so the only room there is in the RDA is for a coil (up to 3.5mm), cotton, and the air passing by it. All these decks are incredibly versatile for coil building and the topcap on the makes the flavor output better then the Petri with the Stock Cap.

    Gorge Caps on the Conspiracy RDA and the Goon 1.5 RDA.
    [​IMG] [​IMG] [​IMG] [​IMG] [​IMG] [​IMG]
     
    Carambrda, mach1ne and Mechman4Ev like this.
  33. SniffingKrylon

    SniffingKrylon New Member

    Blog Posts:
    0
    Joined:
    Apr 7, 2017
    Messages:
    10
    After just twisting together 24g kanthal for a while I finally decided to try something different. Took me a while but finally got some claptons. SS26g/KA132g. These aren't my first ones, more like my 10th try, maybe even more. I really like how the pulse24 RDA looks on the predator though.
    [​IMG]
    [​IMG]


    Sent from my iPhone using Tapatalk
     
    Cormic, raymo2u and mach1ne like this.
  34. SniffingKrylon

    SniffingKrylon New Member

    Blog Posts:
    0
    Joined:
    Apr 7, 2017
    Messages:
    10
    After just twisting together 24g kanthal for a while I finally decided to try something different. Took me a while but finally got some claptons. SS26g/KA132g. These aren't my first ones, more like my 10th try, maybe even more. I really like how the pulse24 RDA looks on the predator though.
    [​IMG]
    [​IMG]


    Sent from my iPhone using Tapatalk
     
    raymo2u, Thatch760 and BKTOAD like this.
  35. mach1ne

    mach1ne Silver Contributor Member For 1 Year

    Blog Posts:
    0
    Joined:
    Feb 18, 2016
    Messages:
    679
    ok here is my attempt to para-clapton without wasting wire. i got a spool of fishing line thats the same size as 38g. it seemed to work well enough. i had a couple snags when i was unwrapping it, but i think that was my lack of experience in general, and not a problem with the fishing line...it also looks like the line i unwrapped is ok to try using a second time.

    8 x .4mm/28/38 on one of the postless decks from the combo rta
    stagg.JPG
    spool.JPG
     
    Cormic, raymo2u, Thatch760 and 4 others like this.
  36. Thatch760

    Thatch760 New Member

    Blog Posts:
    0
    Joined:
    Jul 29, 2017
    Messages:
    23
    IMG_1563.JPG IMG_1567.JPG IMG_1568.JPG 6-.4x.1/28x2/38 ohms at .09 nice warm vape
     
    mach1ne, Cormic and raymo2u like this.
  37. CrazyChef v2.0

    CrazyChef v2.0 Silver Contributor Unlisted Vendor

    Blog Posts:
    0
    Joined:
    Mar 13, 2017
    Messages:
    537
    30g SS316L frames
    6x0.3KA1 ribbon cores
    42g N80 binding

    [​IMG]
     
    Last edited: Sep 22, 2017 at 10:40 PM
    raymo2u, mach1ne and Thatch760 like this.

Share This Page

Close This Message