QUICK PROFILE OR THE DIGIFLAVOR MESH RDA

Discussion in 'Vaping Accessories (Mod Stands, Drip Tips, etc)' started by 88ArDeN88, Dec 14, 2018.

  1. 88ArDeN88

    88ArDeN88 Gold Contributor

    Blog Posts:
    0
    Joined:
    Dec 13, 2018
    Messages:
    1,609
    I am going to buy one of these in about 45 minutes after work. Looking for input, advice. I already have the BONZA RDA and a ton of other tanks, RTA, a couple boxes, but really want a mesh rda to go along with my collection. I love my fireluke mesh tank and figure a mesh rda can only be even better. let me know!
     
  2. UpNorth

    UpNorth New Member

    Blog Posts:
    0
    Joined:
    Nov 28, 2018
    Messages:
    52
    Get the Profile!!!!!! The center spring loaded piece makes it work Awesome. Best flavor out of anything i've used!!!!! Even better if using SS316L mesh.
     
    gsmit1 likes this.
  3. 88ArDeN88

    88ArDeN88 Gold Contributor

    Blog Posts:
    0
    Joined:
    Dec 13, 2018
    Messages:
    1,609
    upload_2018-12-14_16-27-53.png

    it looks like this is the mesh my shop carries. not sure what that mesh you speak of is. i am new to the mesh rda. give me some kanthal and i know what youre talking about. i'm starting to diy my own juice and want to up my flavor game.
     
  4. UpNorth

    UpNorth New Member

    Blog Posts:
    0
    Joined:
    Nov 28, 2018
    Messages:
    52
    Vandy Vape also makes Stainless Steel Mesh, If you want to use the Profile in Temp Control Mode you will want Stainless!!!! It's not necessary but I've found it's even better with the SS mesh... Problem is it's wider material so you either have to cut it to length and width or notch the corners so it fits in the clamps on the Profile. I prefer to notch it as it adds almost double the surface area. Not sure if it's the same case the with Vandy Vape Kanthal mesh or not.
     
  5. 88ArDeN88

    88ArDeN88 Gold Contributor

    Blog Posts:
    0
    Joined:
    Dec 13, 2018
    Messages:
    1,609
    Great info. Thanks. I can't wait to give this thing a try. I was leaning towards the profile from the reviews I've checked out but I figured I'd get an opinion.
     
  6. UpNorth

    UpNorth New Member

    Blog Posts:
    0
    Joined:
    Nov 28, 2018
    Messages:
    52
    One other thing, If you get the Wotofo cotton 6mm, You will want to cut about 1/4 of it (length wise) off. It's a huge wad of cotton and using about 3/4 of it seems to wick better.
     
  7. 88ArDeN88

    88ArDeN88 Gold Contributor

    Blog Posts:
    0
    Joined:
    Dec 13, 2018
    Messages:
    1,609
    I have cotton bacon 2.0 i can use that no?
     
  8. UpNorth

    UpNorth New Member

    Blog Posts:
    0
    Joined:
    Nov 28, 2018
    Messages:
    52
    Probably but might need 2 pieces, There is 1 piece of wotofo cotton with the RDA. Try that first so you can judge what size u need.
     
    MannyScoot likes this.
  9. MannyScoot

    MannyScoot Diamond Contributor Member For 3 Years

    Blog Posts:
    0
    Joined:
    May 23, 2016
    Messages:
    11,318
    Waste of cash.....

    New RDA, new coils, new cotton.... New everything for taste you get out of a Falcon resin tank with mesh coils......

    It's a fad you will get tired of rapidly......

    Sent from my Pixel 2 XL using Tapatalk
     
    PoppaVic likes this.
  10. PoppaVic

    PoppaVic Gold Contributor Member For 4 Years

    Blog Posts:
    0
    Joined:
    Sep 5, 2014
    Messages:
    4,886
    Yeah, pesky subohm stuff.. Waste of money. Still, it's OP's money to waste. <shrug>

    oh, I shoul add a few exclamations !!!! There. Now it's official.
     
    MannyScoot likes this.
  11. MannyScoot

    MannyScoot Diamond Contributor Member For 3 Years

    Blog Posts:
    0
    Joined:
    May 23, 2016
    Messages:
    11,318
    I made that mistake.... Twice already and it's one word about it .... hype......

    Sent from my Pixel 2 XL using Tapatalk
     
    PoppaVic likes this.
  12. PoppaVic

    PoppaVic Gold Contributor Member For 4 Years

    Blog Posts:
    0
    Joined:
    Sep 5, 2014
    Messages:
    4,886
    I've still got mesh around, and an RSST, and Kanthal, and SS316L - I tend to simply stick to SS for coils. Yes, I can fake a SS mesh coil, (but, I'm not willing to throw away another $20-30 on a special RDA - particularly when they need a huge wad of wick). YMMV, but I don't "chase [idiotic] clouds".

    If he wants to try SS wick yeah, there is a definite flavor improvement - there is also a lot of screw-around.

    It's worthwhile to get a sheet to have around - uses pop up and smack you in the nose, (like adding 400mesh to your french-press ;-). I've never had a roll - very short they are - of mesh. Yes, I am fairly sure it's hyped and overpriced. But, an assortment of AWG for coils and cotton, rayon and mesh are just handy. You never know when you'll find Perfection.
     
  13. choderfett

    choderfett Senior Moderator Staff Member Senior Moderator VU Donator Gold Contributor Member For 1 Year

    Blog Posts:
    0
    Joined:
    Jan 5, 2018
    Messages:
    3,590
    Agreed!
     

Share This Page

Close This Message