Become a Patron!
Share your CoilPorn / Specialty Coil Builds / Advanced Building Techniques
- Thread starter BUDKISS
- Start date
New setup in the Velocity...Not as clean as I wanted to do it but I only had 10 minutes from start to finish before I had to get my daughter from school.
Quad 24g/38g Fused Claptons, 8 Wraps @ .11 Ohms (145w for a warm vape, not hot...)
Quad 24g/38g Fused Claptons, 8 Wraps @ .11 Ohms (145w for a warm vape, not hot...)
Beautiful work!
Sent from my LGMS345 using Tapatalk
Sent from my LGMS345 using Tapatalk
This is a three wire twist 1 titanium 28 gauge 2 nickel 28 gauge I haven't tried it yet wanted to know if someone had an opinion
Sent from my SM-N915P using Tapatalk
Were in the try it & find out stage of vaping. All ideas are welcome. 
Also would I use this with ni tc or ti tc mode if i try it?
This is a three wire twist 1 titanium 28 gauge 2 nickel 28 gauge I haven't tried it yet wanted to know if someone had an opinion
Sent from my SM-N915P using Tapatalk
Sent from my SM-N915P using Tapatalk
We are the leaders. What We do will set the standard. Air, land, sea, has been done. We decide what is to become. We have the power to stop the deathly habit of smoking. I for one am proud to be a part of it.
TF Vaping
Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Leaders of what... Everything I do or think of has been done... Fucking probe300 man!We are the leaders. What We do will set the standard. Air, land, sea, has been done. We decide what is to become. We have the power to stop the deathly habit of smoking. I for one am proud to be a part of it.
Sent from my Nexus 6 using Tapatalk
I say something positive. If that's your thoughts, cool with me. I don't know anything about a Probe 300. I had a Ford Probe once. Nice car.
CrazyChef
Custom Hand Crafted Coils - PureCoils.com
VU Vendor
VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
How do I wick this?Were in the try it & find out stage of vaping. All ideas are welcome.
I would try SS Mesh followed by cotton overlay... for a start.
CrazyChef
Custom Hand Crafted Coils - PureCoils.com
VU Vendor
VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
Obviously I was just kidding with the above post, but it's interesting that you mentioned mesh. I was just looking at some today (online). I think it was SS. I was wondering (seriously) if it can be coiled in some way, or at least installed, and used wickless? Maybe rolled up and formed into a stovetop coil or something.
Sure look into Genesis atomizers. I have several.
Sent from my LGMS345 using Tapatalk
Sent from my LGMS345 using Tapatalk
What makes an atomizer work is a direct short making the wire heat up.
If one post is isolated as ground, the other post is positive, it don't matter as long as it makes a circuit with a switch.
All a mod does is control the amount of voltage & the length of the short.
Some have purdy lights & blinky things too.
TF Vaping
Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
I was strongly considering some SS just the other day... I think it'd be cool inside a decored Clapton...
Sent from my Nexus 6 using Tapatalk
I have tryed it. Cant hold enough juice to make it a viable medium alone.
Sent from my LGMS345 using Tapatalk
Sent from my LGMS345 using Tapatalk
I will use 3mm rolled up & coat the outside be "coating" the outside of it with cotton by gently rubbing the mesh against the cotton, to form a coating. (thanks Rip) works well. Flavor is great. But drys out faster than it wicks. No chain Vaping.
TF Vaping
Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Oh god no, I meant wick it as usual, just using the mesh as a core
Sent from my Nexus 6 using Tapatalk
Na don't wick fast enough too be useful.
I don't know if it's my phone or cosmic debris but everytime I post I have to log back in. It's pissing me off.
I have doubled up .28 Kanthal wrapped .5 rope wick around it like the handrail on a ship And used it in drippers. Gets about two more hits than cotton, but is not worth making for the use it provides.
I just started on this side of vaping a few days ago. No questions; just a few observations.
--I'm ashamed I never straightened any of my wire before today. You may also verbally glare at me for not having an ohm meter... It's on the way.
--Double-strand twisted 32-gauge Kanthal is a baby step, but I immediately starting using it to rebuild Protank attys. Way better.
--Took the 32-gauge Kanthal and twisted 3 strands, all the way up to 6 strands. I will find a use for all those beauties later. (I have an RDA.)
--Failed on braiding. I had seen a couple videos on The YouTubes, but only enough to grasp the concept, not learn the finer details. I'm guessing braiding with twisted wire would be easier.
--Actually, it seems like everything would be easier with twisted wire. I've barely scratched the surface and am already pleased.
--I'm ashamed I never straightened any of my wire before today. You may also verbally glare at me for not having an ohm meter... It's on the way.
--Double-strand twisted 32-gauge Kanthal is a baby step, but I immediately starting using it to rebuild Protank attys. Way better.
--Took the 32-gauge Kanthal and twisted 3 strands, all the way up to 6 strands. I will find a use for all those beauties later. (I have an RDA.)
--Failed on braiding. I had seen a couple videos on The YouTubes, but only enough to grasp the concept, not learn the finer details. I'm guessing braiding with twisted wire would be easier.
--Actually, it seems like everything would be easier with twisted wire. I've barely scratched the surface and am already pleased.
Claptoning twisted wire and then helixing it is also nice
I have at least 100 feet of 32 gauge left. Just wrapped a 6-thread twisted with some 2-thread twisted. Easier than I thought, but doesn't look very Clapton-y.
itsmenotyou
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Rip Mr troll. You have served me well
sent from a dumb operated smartphone
sent from a dumb operated smartphone
TF Vaping
Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Finally got a Alien Wire Down....3x26g/38g
Some other Wires...
2x36g/44g/40g Nano Twisted Helix Clapton
2x26g/34g/32g Twisted Helix Clapton
2x24g/32g/38g Staggered Fused Clapton
2x22g/26g & 36/44g Claptoned Fused Clapton with Claptons
Some other Wires...
2x36g/44g/40g Nano Twisted Helix Clapton
2x26g/34g/32g Twisted Helix Clapton
2x24g/32g/38g Staggered Fused Clapton
2x22g/26g & 36/44g Claptoned Fused Clapton with Claptons
Last edited:
Go to FT use the code xmas 10% off, and I'm sorry for your lost, it's a good deviceRip Mr troll. You have served me well
sent from a dumb operated smartphone
Enviado desde mi C6506 mediante Tapatalk
Revisited a classic for this build in the Noxus. 26/36g twisted claptons w two 32/40g claptons helixed into the grooves.
How do you like the Noxus? Ive been looking at a black one for a good while just havent really thought of getting one until seeing your build in it...Nice work as always
Revisited a classic for this build in the Noxus. 26/36g twisted claptons w two 32/40g claptons helixed into the grooves.
Ohhhhhhmaigahd! That is GAWJUSS. I love those colors! As always, very nice work.
Revisited a classic for this build in the Noxus. 26/36g twisted claptons w two 32/40g claptons helixed into the grooves.
LMAO, just realized I copied raymo. The uncanny phrasing was unintentional, I promise.
BreeZyCloudZ
Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Textbook Alien 3x26SS-36N80 B/W and Gold Shot
TF Vaping
Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
All respect included... A "TEXTBOOK ALIEN" doesn't exist unless fucking quantum physics is your bathroom literature... Sick build dude.
Sent from my Nexus 6 using Tapatalk
Series Build.
3x30/36g N80 Aliens
9 wraps around a 3mm bit
Clocks in at .49 ohms
Definitely my fav series build so far. The coils soak up almost 4 drops of juice each without any wicking. It makes them perfect for vaping in series, i can take a nice sized pull and get great flavor without worrying about the wick keeping up with the coil. This was a problem for me using round wire builds in series. Been vaping this build for two days and i'm very pleased with performance
3x30/36g N80 Aliens
9 wraps around a 3mm bit
Clocks in at .49 ohms
Definitely my fav series build so far. The coils soak up almost 4 drops of juice each without any wicking. It makes them perfect for vaping in series, i can take a nice sized pull and get great flavor without worrying about the wick keeping up with the coil. This was a problem for me using round wire builds in series. Been vaping this build for two days and i'm very pleased with performance
Thanks!! It's not bad, especially for the price. It takes the air in underneath, so it doesn't sit flush-which makes my ocd a little crazy haha. But it is built well, and the magnetic cover is a lot of fun. I will probably post a review after i have a little more time with it. It also has no airflow adjustment, so there's also that to consider. It does look pretty cool on my mech box, if you can forgive the gap for the airflow. I'll post a picture when i get home so you can see what i mean. Its a good atty though, especially for the price
I finally made enough Alien Wire to make a sub standard coil to try out...Instead of the normal routine I made it a Fused Clapton instead of a 3 Core....
22g/30g Alien Fused Clapton....
And for my Entry to @CrazyChef ....Ill be making more wires with some inspiration from your recent builds..
Something a threw together to make myself feel better since Ive been neglecting Coil Bulding lately....
22g/30g Alien Fused Clapton....
And for my Entry to @CrazyChef ....Ill be making more wires with some inspiration from your recent builds..
Something a threw together to make myself feel better since Ive been neglecting Coil Bulding lately....
BreeZyCloudZ
Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Haha just meant typical alien build, 3x26,36 outside
CrazyChef
Custom Hand Crafted Coils - PureCoils.com
VU Vendor
VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
Speaking of quantum physics... Have you tried working with 50g (or higher) wire yet? That shit is like working with quantum physics. You're never quite sure where it is, but you know where it's supposed to be and go from there. If things go according to the theory then you were right. If not, then start over. Just like friggin' QP.