Become a Patron!
Show Us your custom Made Mod's
- Thread starter DireHavok
- Start date
havok makes some nice stuff just wish hed make me a 200 watt raptor box!!!!!
That 1st and 4th pics are nice
Pic 1.2.4.5 are what I lust after. If I can get info on where to get the parts, that's all I desire.
jeremypgaal
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Dire, as soon as I can figure out how the PM on this site works I will PM you. I want to build a Bad ass Mod so bad I can taste it. All I am asking is where to get the parts. Can't get 510 connectors at 7/11. Yet rotfl
Nicoroshi
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Just an idea I had for a DNA30 (actual evolv) chip I had and $2.60 worth of scrap plexiglass.
I present Crapbox ver 2
Size comparison next to a Fasttech clone
Do you like the homemade battery connectors?
Might look like crap but vapes like a champ, is lightweight, sliding back panel for battery access, and has a spring loaded 510.
Something I was working on today (WIP DIY DNA 30 Maple box mod).
Finish is drying currently.
Sometimes it's nice to have a mill, and a lathe in the shop
I present Crapbox ver 2
Size comparison next to a Fasttech clone
Do you like the homemade battery connectors?
Might look like crap but vapes like a champ, is lightweight, sliding back panel for battery access, and has a spring loaded 510.
Something I was working on today (WIP DIY DNA 30 Maple box mod).
Finish is drying currently.
Sometimes it's nice to have a mill, and a lathe in the shop
MOAR POWER!!!!! RRR RRR RRR this could concievably start a car...lol its name...The Behemoth.
Included is a pic of a local cloudchaser falling in LOOOVE...
Included is a pic of a local cloudchaser falling in LOOOVE...
oops maybe I should shrink pics next time...srry
StinkMutt57
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
TowerOfVape
RISH of Passage
VU Donator
Bronze Contributor
Member For 4 Years
Show Host
Reviewer
Vape Media
VU Live Host
I saw one of @DireHavok's mods up-close this past weekend. It's pretty killer. I will have one before the year is out. Oh yes...I will indeed!
BTW Nicoroshi Nothing at all wrong w a Plexi mod...I would have gone a little farther with the batt connectors...but then again noone has ever accused me of not going far enough...are they just solid core wire or the core from some coax cable...how are they holding up BTW.... You know me...always interested in knowing the details of a hack...
Nicoroshi
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Solid core of copper wire bent into a circle with a piece running across the center that has a bend in the center to catch the battery terminal (also has some spring to it that way for a positive battery connection).
Held in with good ole superglue.
How are they holding up?
I vape that mod like a madman and since there is no built
In charger I change the battery about once every other day
Still running like a champ
Still surprises me how light it is.
Held in with good ole superglue.
How are they holding up?
I vape that mod like a madman and since there is no built
In charger I change the battery about once every other day
Still running like a champ
Still surprises me how light it is.
Last edited:
TheDoctor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
so, here is mine, but i made mine all from scratch (no kits at all)
DISCLAIMER!!!!! DO NOT TRY THIS AT HOME UNLESS YOU KNOW WHAT YOU ARE DOING.
what i did here is very dangerous unless you know how to work with electronics well, DO NOT DO THIS (which im sure most here do but i dont want that 1 guy who thinks he knows and blows himself up)
this mod is a completely un-regulated mod, no chip at all battery straight to 510. i hollowed out and old cars toy that took batteries, modified the battery compartment to fit 2x 18650's and wired them to a trigger from an old drill that didn't work anymore, then wired the trigger to an old 510 from an old ego (soldered new wire, the tiny wire would have cooked fast) i used 12 gauge wire for the whole thing (the same wire that is in your walls at home) i need to retrofit something for a battery cover though as the old battery cover doesn't fit anymore.
DISCLAIMER!!!!! DO NOT TRY THIS AT HOME UNLESS YOU KNOW WHAT YOU ARE DOING.
what i did here is very dangerous unless you know how to work with electronics well, DO NOT DO THIS (which im sure most here do but i dont want that 1 guy who thinks he knows and blows himself up)
this mod is a completely un-regulated mod, no chip at all battery straight to 510. i hollowed out and old cars toy that took batteries, modified the battery compartment to fit 2x 18650's and wired them to a trigger from an old drill that didn't work anymore, then wired the trigger to an old 510 from an old ego (soldered new wire, the tiny wire would have cooked fast) i used 12 gauge wire for the whole thing (the same wire that is in your walls at home) i need to retrofit something for a battery cover though as the old battery cover doesn't fit anymore.
DireHavok
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Nice job for first custom mod I make mech boxes too with 18 awg wire and yeah they hit harder than most tubes.
Vaper Dyana
Bronze Contributor
Im soo jealous of all the mods.. I wish I was able to make one!! Great work you guys!!!
TheDoctor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
yeha so i just hold it up a little and say "vroom vroom"Innovative TheDoctor. Might drag a little low on the back end when you try to roll it though
Wolftek
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
SX350 @ 50 Watts Turned out good http://imgur.com/a/CP9DK
Sent from my iPhone using Tapatalk
UncleRJ
Will write reviews for Beer!
Staff member
Senior Moderator
VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
Reviewer
Moderator
Here is my baby!
Perhaps not a custom custom like some of the above fine examples but a limited production run all the same. I have it running on two 16850 X 2600 mAh batteries.
What makes it so special to me is that it was made after Fazed Box Mods officially stopped making them as a personal favor from Fazed and purchased for me as an Xmas gift from another vaping friend.
Feels great in my hand and not too much worry about the batteries dying!
Perhaps not a custom custom like some of the above fine examples but a limited production run all the same. I have it running on two 16850 X 2600 mAh batteries.
What makes it so special to me is that it was made after Fazed Box Mods officially stopped making them as a personal favor from Fazed and purchased for me as an Xmas gift from another vaping friend.
Feels great in my hand and not too much worry about the batteries dying!
A few more unregulated 18650 in parallel
Last edited:
Crennan_Baker
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Unlisted Vendor
Member For 5 Years
Very nice!
DireHavok
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Must say some interesting milling on front cover. Very cool.
My first Mod. It is not custom by the standards of those great Mods others have built, But it works & considering I had no idea what I was doing, works pretty well. 75W single 18650. The fancy stuff is yet to come. 
Wolftek
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Coca-Cola Retro Style Collectible SX350 Mod #2
This is the second of only 2 made.
Features 50 Watts, .2 Ohm, Bypass Mode, Fatdaddy 22mm 510 connector, Upgraded 18ga silicone wire, Padded battery sleeve, Small rounded clicky button, USB port, vent hole.
This is the second of only 2 made.
Features 50 Watts, .2 Ohm, Bypass Mode, Fatdaddy 22mm 510 connector, Upgraded 18ga silicone wire, Padded battery sleeve, Small rounded clicky button, USB port, vent hole.
Last edited:
Scuba-Matt
Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Great work all.
TheDoctor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
i have a question, where did u get your 510? i keep frying the solder points on mine, ive been looking for one like that.Coca-Cola Retro Style Collectible SX350 Mod #2
This is the second of only 2 made.
Features 50 Watts, .2 Ohm, Bypass Mode, Fatdaddy 22mm 510 connector, Upgraded 18ga silicone wire, Padded battery sleeve, Small rounded clicky button, USB port, vent hole.
EDIT: that is if you made this, if not, does anyone know where i can get a solderless 510?
Wolftek
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Yes, I made it. It is the 2nd of 2 I made like this.
It is up on ebay for anyone interested. here
These are Fatdaddy spring loaded 510 connectors for box mods. here
Seems like the FD's are always out of stock.
Here are some similar connectors from Veritube .
There is also the chi-you 510s if that will fit the bill for solderless. here
TheDoctor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
![IMG_20140708_192502[1].jpg](/data/attachments/2/2122-1c2b4ee344024d72b93ef6f69e05097d.jpg)
![IMG_20140708_223310[1].jpg](/data/attachments/2/2123-903ebba49a3bbba6a0010bacbf26a7fc.jpg)
Sent from my iPhone using Tapatalk
DireHavok
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Nice video..it soothed me with the sounds of flowing water in the background.
DireHavok
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Is that a wrap on there?
Sent from my iPhone using Tapatalk
Couldn't make it pretty, so I made it shiny. Same Mod, more work but I can signal too aircraft if I get lost. 
DireHavok
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
http://www.supermagnetman.net/index.php this is where I get my magnets the ones I use are N50 both disc and cylinder. Disc for cover and cylinder for box. Size using a micrometer. Sorry I dont have sizes I use right now..you can also get rings for mods here the n50's are very strong
CJ
VU Webmaster
Staff member
VU Senior Leadership
VU Senior Administrator
VU Administrator
Senior Moderator
VU Donator
Platinum Contributor
ECF Refugee
Member For 5 Years
Reddit Exile
VU Patreon
I appreciate the reply, I personally do not own a micrometer, something else I need to add to my list.. If you get the time (no rush) could you perhaps measure it for me?