Become a Patron!

squirt squirt... A squonk porn thread

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Is that the clone from 3fvape? Is it any good ? Voltage drop?

Sent from my Redmi Note 4 using Tapatalk

The authentic is one of the fastest responding mods I own - am kinda curious about the clone though - would love to have one just as good that I was't afraid to take out of the house, lol
 

MrMeowgi

The Vapin' Drummer
VU Donator
Diamond Contributor
Member For 4 Years
The authentic is one of the fastest responding mods I own - am kinda curious about the clone though - would love to have one just as good that I was't afraid to take out of the house, lol
I'll probably be picking one up from China after their new years so I'll let you know eventually. Ha ha

Sent from my Nexus 6P using Tapatalk
 

Wicked Gene

Silver Contributor
Member For 4 Years
Is that the clone from 3fvape? Is it any good ? Voltage drop?

Sent from my Redmi Note 4 using Tapatalk

The authentic is one of the fastest responding mods I own - am kinda curious about the clone though - would love to have one just as good that I was't afraid to take out of the house, lol

Yes, it is a clone from 3F. I believe it was well worth the price. I haven't measured the voltage drop, but it hits pretty dang hard. I would put it up against any of the mass produced mods out today. It's not quite as polished as the authentic but what can you expect for 1/10th the price... all things said I like it


Sent from the Twilight Zone!
 

fozzy71

Silver Contributor
Member For 4 Years
Stabilized piss squonk...
d8f2eb92c9cfdc769e9c4ede2155ce8b.jpg



Sent from the Twilight Zone!
pardon my ignorance but what is the name of that mod clone on 3fvape?
 

hariboholmes

Bronze Contributor
Member For 2 Years
Yes, it is a clone from 3F. I believe it was well worth the price. I haven't measured the voltage drop, but it hits pretty dang hard. I would put it up against any of the mass produced mods out today. It's not quite as polished as the authentic but what can you expect for 1/10th the price... all things said I like it


Sent from the Twilight Zone!
Thanks I've been on the fence about getting one as reviews seem scarce.

I love the way it looks and no doubt the delrin/ultem could be polished by hand if required.

Think I will add one to my next Fastech order as 3fvape are out of stock.

I noticed they do a blue resin one that looks awesome do they take a standard 8ml bottle or is it likely to be fussy on sizing?



Sent from my Redmi Note 4 using Tapatalk
 

Wicked Gene

Silver Contributor
Member For 4 Years
Thanks I've been on the fence about getting one as reviews seem scarce.

I love the way it looks and no doubt the delrin/ultem could be polished by hand if required.

Think I will add one to my next Fastech order as 3fvape are out of stock.

I noticed they do a blue resin one that looks awesome do they take a standard 8ml bottle or is it likely to be fussy on sizing?



Sent from my Redmi Note 4 using Tapatalk

I think most standard 6-8 ml bottles will fit.


Sent from the Twilight Zone!
 

b.m.

Silver Contributor
Member For 4 Years
Finally got around to ordering and building an S21 mod that Troydestroy has raved about for a while.I can see why he likes these so much,they are great little mods.I like it enough that i'm ordering 4 more of them haha.It's alumide dyed with Rit dyemore synthetic in graphite grey.The next ones will be natural grey alumide,blue alumide,red alumide,and possibly either orange or green alumide.
uNBrHUm.jpg
 

MrMeowgi

The Vapin' Drummer
VU Donator
Diamond Contributor
Member For 4 Years
Finally got around to ordering and building an S21 mod that Troydestroy has raved about for a while.I can see why he likes these so much,they are great little mods.I like it enough that i'm ordering 4 more of them haha.It's alumide dyed with Rit dyemore synthetic in graphite grey.The next ones will be natural grey alumide,blue alumide,red alumide,and possibly either orange or green alumide.
uNBrHUm.jpg
So you can dye alumide? I've got some purple rit dyemore I was going to do the orca with but it didn't make it. Ordered some orange doors for the toaster v3. I'd love to do the body in the purple.

Sent from my Nexus 6P using Tapatalk
 

hariboholmes

Bronze Contributor
Member For 2 Years
Finally got around to ordering and building an S21 mod that Troydestroy has raved about for a while.I can see why he likes these so much,they are great little mods.I like it enough that i'm ordering 4 more of them haha.It's alumide dyed with Rit dyemore synthetic in graphite grey.The next ones will be natural grey alumide,blue alumide,red alumide,and possibly either orange or green alumide.
uNBrHUm.jpg
Where did you get it? Looks really small and neat :)

Sent from my Redmi Note 4 using Tapatalk
 

b.m.

Silver Contributor
Member For 4 Years
Where did you get it? Looks really small and neat :)

Sent from my Redmi Note 4 using Tapatalk
Troydestroy posted the link for the files a while back,so i copied them and had the body printed at I.materialize,for alumide it was like $23 or so,then you just need a modmaker 510,magnets and some silver or copper to finish the build.The files he linked to has the directions on what you need and how to assemble everything.Yes,it is a really small mod,and it's designed for 20700/21700 batteries,but still the smallest mod i've had and very light too.
I tried searching for the files and can't find where they came from,but maybe @troydestroy can repost the link to the files.
 

b.m.

Silver Contributor
Member For 4 Years
So you can dye alumide? I've got some purple rit dyemore I was going to do the orca with but it didn't make it. Ordered some orange doors for the toaster v3. I'd love to do the body in the purple.

Sent from my Nexus 6P using Tapatalk
Yeah,i've dyed alumide a few times,it takes the dye fairly well.The first time,i used the powder in black,and it took the dye good,but wasn't black,more of a charcoal grey type color.So on this mod i went for that dyemore liquid and it worked perfectly.Just get the water and dye really hot,not boiling,just very hot,and let the parts soak for a while,then check them,and if you want it darker,just reheat the water/dye and let it soak again.I did 2 soaks about 20 minutes each.
 

troydestroy

Silver Contributor
Member For 4 Years
Troydestroy posted the link for the files a while back,so i copied them and had the body printed at I.materialize,for alumide it was like $23 or so,then you just need a modmaker 510,magnets and some silver or copper to finish the build.The files he linked to has the directions on what you need and how to assemble everything.Yes,it is a really small mod,and it's designed for 20700/21700 batteries,but still the smallest mod i've had and very light too.
I tried searching for the files and can't find where they came from,but maybe @troydestroy can repost the link to the files.
https://apluswork.jimdo.com/downloads/

Helluva mod... Minimal work to assemble. Cheaper than an Orca to build. Enjoy :)
 

MrMeowgi

The Vapin' Drummer
VU Donator
Diamond Contributor
Member For 4 Years
Yeah,i've dyed alumide a few times,it takes the dye fairly well.The first time,i used the powder in black,and it took the dye good,but wasn't black,more of a charcoal grey type color.So on this mod i went for that dyemore liquid and it worked perfectly.Just get the water and dye really hot,not boiling,just very hot,and let the parts soak for a while,then check them,and if you want it darker,just reheat the water/dye and let it soak again.I did 2 soaks about 20 minutes each.
I'll definitely be trying it. Hope the purple doesn't look nasty. Deep purple will work for me.ha ha

Sent from my Nexus 6P using Tapatalk
 

b.m.

Silver Contributor
Member For 4 Years
I'll definitely be trying it. Hope the purple doesn't look nasty. Deep purple will work for me.ha ha

Sent from my Nexus 6P using Tapatalk
Post some pics once you get it done.I love a deep purple,i have a Toaster design tiny toaster with purple body and green door and button haha.When you dye it,check it about every 5 minutes or so to make sure it doesn't get darker than you want it,just remember,it will lighten up a bit when it dries,so let it go until it looks just a little darker than you want it.
Here's my purple mod haha.
2UgF1fH.jpg
 

MrMeowgi

The Vapin' Drummer
VU Donator
Diamond Contributor
Member For 4 Years
Post some pics once you get it done.I love a deep purple,i have a Toaster design tiny toaster with purple body and green door and button haha.When you dye it,check it about every 5 minutes or so to make sure it doesn't get darker than you want it,just remember,it will lighten up a bit when it dries,so let it go until it looks just a little darker than you want it.
Here's my purple mod haha.
2UgF1fH.jpg
That's sweet looking. Thanks for the advice. I'll definitely post pics

Sent from my Nexus 6P using Tapatalk
 

troydestroy

Silver Contributor
Member For 4 Years
Good find on that page,the link i seen before was only for the S21.I didn't know they also have an S26,which works out perfect,i was getting ready to order a mushroom mod to use a few 26650's i have laying around,but i like this design,so i'll grab that one too haha.
I'll try my hand at that top fire mod next :) looks fun...
 

MrMeowgi

The Vapin' Drummer
VU Donator
Diamond Contributor
Member For 4 Years
That's sweet looking. Thanks for the advice. I'll definitely post pics

Sent from my Nexus 6P using Tapatalk
It's a pretty dark purple you can see it for the most part. Maybe with the new orange button and door on the way it'll contrast more.
18c889716de19de69827911ad2b4c123.jpg
2db04291aca457805ed7773505954d32.jpg


Sent from my Nexus 6P using Tapatalk
 

SteelDriver

Gold Contributor
Member For 4 Years
It's a pretty dark purple you can see it for the most part. Maybe with the new orange button and door on the way it'll contrast more.
18c889716de19de69827911ad2b4c123.jpg
2db04291aca457805ed7773505954d32.jpg


Sent from my Nexus 6P using Tapatalk
If you have trouble with the door there's a trick.

Sent from my LG-D850 using Tapatalk
 
Here are a couple panels I did for my Athena. Got the gold Drop on the way, so thinking ill run it with the yellow geometric triangles. My cousin ordered the new matte green/black one, so he'll get the camo printed ones.
 

Attachments

  • 28079931_10157056970074392_1524786535_o.jpg
    28079931_10157056970074392_1524786535_o.jpg
    1 MB · Views: 36
  • 28081821_10157056970024392_1124849405_o.jpg
    28081821_10157056970024392_1124849405_o.jpg
    1.3 MB · Views: 36

~Don~

Platinum Contributor
Member For 5 Years
Really diggin the all white should i remove the blue lettering or keep it one pick all white one pick showin the blue let me know whatcha think im torn inbetween
5130eb00a83eb19bf9064b39b2f2defa.jpg
7af1b191fd27d31b565856890170eae7.jpg


Sent from my SM-G950U using Tapatalk
I think you should grab a Zeroten Blue squonk bottle

upload_2018-2-17_20-45-13.png

and a white Vikset or Play Inc. Cap ;)

OR

If you stay with the white, change the Key/Cup on the Bliss to White
 

VU Sponsors

Top