Squonkers are Bonkers

Discussion in 'Bottom Feeders / Squonking' started by DogMan, Jan 16, 2016.

  1. Bardiel003

    Bardiel003 New Member

    Blog Posts:
    0
    Joined:
    Aug 9, 2017
    Messages:
    84
    Awesome thanks ^w^. I'm still working on measurements before printing it. The mod is going to be flat top on front, rounded in rear with a cut out opening for the bottle. All I need to measure is the hight difference and how much of a opening I'll need to make for the 510 and the distances from top to the bottle midway.
     
  2. Train

    Train Silver Contributor Member For 3 Years

    Blog Posts:
    0
    Joined:
    Jun 26, 2014
    Messages:
    890
    Woopsie. Didn't know that - they do look like a good one...was just naming "square boxes" - nothing against 'em!!
    :)

     
    jmoney426 likes this.
  3. Train

    Train Silver Contributor Member For 3 Years

    Blog Posts:
    0
    Joined:
    Jun 26, 2014
    Messages:
    890
    The maker of that 6ixty 7even was being really cool, putting his designs up on Sculpteo, so folks could print their own - but then people starting selling them, including some "rare" doors and such - and calling them "authentic". Amateur cloners. So he took it down...

    [​IMG]


     
    b.m. and Bardiel003 like this.
  4. So619Cal

    So619Cal Silver Contributor Member For 1 Year

    Blog Posts:
    0
    Joined:
    Apr 5, 2016
    Messages:
    780
    I should just buy a Floris box and whip up a mod myself...Mod..button is all I need...Rest is EZ-PZ...Prefer Delrin boxes anyway...

    I can't with good conscience ever recommend the Molly to anyone... Its a great little mod, BUT... their customer service is SHIT. Sure the box is cool, works well from the get go...but mine had a fitment issue with the factory door...Pm'd them and they were all like, Its the magnets causing the door to move... it's not...showed video and pictures of the door and they both agreed its probably the box enclosure tolerances being off...messaged video of the door having a near 1/8th inch gap on the top of the mod and Ludovic agreed to send me another box once they got supply in, which was the past few days...which today he said he would have them (Current orders etc mailed out this week ) ...have nearly 7 weeks of communication with that dude and their response was...send it back to us on our dime... I offered to pay return shipping so I wouldn't be down the mod in the transit and he agreed... We shall see...with the lack of professionalism they have, I am sure this will end up with a Paypal dispute by Thursday.

    I never expected the mod to be PERFECT...but the door never sat right, ordered a stab door and it fits perfect, but I asked the guy to make it slightly taller...

    Ahwell live and learn ;)
     
    all_thumbs likes this.
  5. BrewBear

    BrewBear Gold Contributor Member For 1 Year

    Blog Posts:
    0
    Joined:
    Jul 23, 2016
    Messages:
    4,407
    If you ever think of printing a front squonk mod for the FSK chip, please let me know.
     
    So619Cal likes this.
  6. Bardiel003

    Bardiel003 New Member

    Blog Posts:
    0
    Joined:
    Aug 9, 2017
    Messages:
    84
    That be actually be awesome to have a premade file and work around of it. And damn that also too bad for people who are into want to work on there own but have no experience in 3d printing lol. I'm learning as I go but with the free software I use it's kinda limited lol!
    These are my designs I am working with us think tinker website. Still working on it to where I need to re measure the height and need to know the diameter of a 510 in order to fit in with some room for it. Trying not to make it too bag for room as well as not too tightly compacted in order for batter and circuit able to give off heat rather heating each other [​IMG][​IMG]
     
    Proatype and Train like this.
  7. Bardiel003

    Bardiel003 New Member

    Blog Posts:
    0
    Joined:
    Aug 9, 2017
    Messages:
    84
    New to acronyms lol fsk chip? Never heard of it. All I know for chipsets are the DNA 60 & 75. =P and I'm not to quite sure I don't own a 3d printer. But since I am a car enthusiasts and major to engineering. I know lot of friends who own one or two of them Lmao!
     
  8. Bardiel003

    Bardiel003 New Member

    Blog Posts:
    0
    Joined:
    Aug 9, 2017
    Messages:
    84
    Saw the chip. Looks more simpler Oo! Mutha fucking shit! Unparalleled battery sled just needed and button and mod case it self.. Hmm looks doable just wondering if the bottle can still be reset faced like my idea =/ hmmmm.....
     
  9. BrewBear

    BrewBear Gold Contributor Member For 1 Year

    Blog Posts:
    0
    Joined:
    Jul 23, 2016
    Messages:
    4,407
    They are used in the HohmTech mods, the only chip I know of that will TC Kanthal. I have several G2 (2 18650 batts) and Slice ( single 26650/18650) and I'd have no problem taking the chip out of one of them. The dual 18650 goes to 171w, the single goes to 101w.
     
    Bardiel003 likes this.
  10. Bardiel003

    Bardiel003 New Member

    Blog Posts:
    0
    Joined:
    Aug 9, 2017
    Messages:
    84
    Hmmm wonder how would I build it. Because my original idea for my squonk was to have 1 battery 1 bottle, slim design for button and mosfet. And that's it. But now with this as a dual 18650 and a bottle. It would maybe be like a pentagon design maybe..
     
    BrewBear and So619Cal like this.
  11. BrewBear

    BrewBear Gold Contributor Member For 1 Year

    Blog Posts:
    0
    Joined:
    Jul 23, 2016
    Messages:
    4,407
    This is a MOSFET dual battery squonk, it is very comfortable to use with either hand 2017-06-10 08.27.15.jpg 2017-05-27 19.45.42.jpg 20170603_085817.jpg
     
    Proatype, Bardiel003 and Train like this.
  12. Bardiel003

    Bardiel003 New Member

    Blog Posts:
    0
    Joined:
    Aug 9, 2017
    Messages:
    84
  13. Bardiel003

    Bardiel003 New Member

    Blog Posts:
    0
    Joined:
    Aug 9, 2017
    Messages:
    84
    Like the gbox 100 design would be adequate. Batter on the sides bottle be the middle.
     
  14. BrewBear

    BrewBear Gold Contributor Member For 1 Year

    Blog Posts:
    0
    Joined:
    Jul 23, 2016
    Messages:
    4,407
    I have the Kanger 160 squonk, very similar to the GBox, and I must say the design of the mod I posted, @Studiovape design, is much more comfortable and easier to use.
     
  15. b.m.

    b.m. New Member

    Blog Posts:
    0
    Joined:
    May 21, 2017
    Messages:
    44
    I had 2 of those v2's printed,got the files shortly before he took them down.I really like that box,i wish someone was making that goat head door for the v2's i would buy one,i keep watching on their page,but doesn't look like they will be made anymore.
     
    Train likes this.
  16. Train

    Train Silver Contributor Member For 3 Years

    Blog Posts:
    0
    Joined:
    Jun 26, 2014
    Messages:
    890
    I don't have any kind of handle on the graphics of those - which ones were special or limited, etc...or if there's meaning behind any of the "occultus" stuff. Just not my thing. I just like the shape and materials and finish, etc - particularly the Neo.
    I have a second one coming...

    flatblack2.jpg

    I printed myself a green door, for a cheerier look, lol.
    (I mean I ordered it direct from the print-shop, I don't HAVE a 3D printer...)
    greenbody1sm.jpg




     
    Proatype and b.m. like this.
  17. So619Cal

    So619Cal Silver Contributor Member For 1 Year

    Blog Posts:
    0
    Joined:
    Apr 5, 2016
    Messages:
    780
    Floris has 2x700 boxes available...snagging me one
     
    all_thumbs likes this.
  18. SteelDriver

    SteelDriver Silver Contributor Member For 1 Year

    Blog Posts:
    0
    Joined:
    Apr 5, 2016
    Messages:
    714
    3fvape 5.00 filler bottles work fine. [​IMG]

    Sent from my SAMSUNG-SM-N910A using Tapatalk
     
    Proatype, MaxPerilous, RonJS and 2 others like this.
  19. So619Cal

    So619Cal Silver Contributor Member For 1 Year

    Blog Posts:
    0
    Joined:
    Apr 5, 2016
    Messages:
    780
    upload_2017-8-12_16-8-1.png

    And its ordered :D Now to get the Silver Contacts, and order some fasteners similar as to how the Molly contacts are secured to the body.
     
    Proatype, Train and SteelDriver like this.
  20. Bardiel003

    Bardiel003 New Member

    Blog Posts:
    0
    Joined:
    Aug 9, 2017
    Messages:
    84
    Let me. Know how it is. If it's legit I might buy it as well for delrin =p
     
    So619Cal likes this.
  21. So619Cal

    So619Cal Silver Contributor Member For 1 Year

    Blog Posts:
    0
    Joined:
    Apr 5, 2016
    Messages:
    780
    I think it will be perfect honestly...I have not heard one bad thing about them from the members here who had theirs made by Saint... And it was one of the 3 I considered (Molly, Orca, 2x700 Boxer) when I was first going to get into Mech Squonkers...
     
  22. Bardiel003

    Bardiel003 New Member

    Blog Posts:
    0
    Joined:
    Aug 9, 2017
    Messages:
    84
    The r and its under 100 with tax and shipping (I hope lol)
     
    So619Cal likes this.
  23. Bardiel003

    Bardiel003 New Member

    Blog Posts:
    0
    Joined:
    Aug 9, 2017
    Messages:
    84
    Hell now I'm thinking of sending Jim my idea for my squonk mod and have it made out if delrin =p
     
  24. So619Cal

    So619Cal Silver Contributor Member For 1 Year

    Blog Posts:
    0
    Joined:
    Apr 5, 2016
    Messages:
    780
    $53.03 USD shipped, By Description...Box, Door w/Magnets, Button...Already have the 510...Copper is cheap if I go that route ($8 on Amazon) or $22 Silver...Thinking about it, I'll probably go the Copper route since MM510 is brass/stainless and isn't the Silver Plated Mod Dog Nano...I'm a Sheet metal Installation Foreman ( HVAC ) with access to the shop to cut the contacts, or use my shears I have...Plus Copper hits hard enough...Heck the Molly Hits harder than my SOI Tube lol and that tube has Silver Contacts... Plus I needed ( wanted ) another Squonk that really fit 24mm RDAs well ( The 2x700 Orca is 25mm wide )

    So Figure for a nice squonk and a little time...53+10+8 (Box, 510, Copper Sheet) $71 excluding batteries
     
    Proatype, SteelDriver and Bardiel003 like this.
  25. Bardiel003

    Bardiel003 New Member

    Blog Posts:
    0
    Joined:
    Aug 9, 2017
    Messages:
    84
    Hmm I maybe order that fsk chip and re model the mod to where : bottle, then have dual sleds all 3 line up. Shouldn't be too big in a sense and the 510 be close not far away. And battery sleds connections to the chip is pretty simple..
     
  26. Bardiel003

    Bardiel003 New Member

    Blog Posts:
    0
    Joined:
    Aug 9, 2017
    Messages:
    84
    Might go with your route and also order 510 from mod maker. I see that's a legit squonk 510 connectors then here in US.
     
    So619Cal likes this.
  27. antikryst

    antikryst New Member

    Blog Posts:
    0
    Joined:
    Feb 27, 2017
    Messages:
    106
    Yup.

    Sent from my SM-G935F using Tapatalk
     
    BrewBear likes this.
  28. Sonar505

    Sonar505 Bronze Contributor Member For 3 Years

    Blog Posts:
    0
    Joined:
    Aug 5, 2014
    Messages:
    422
    Does anyone else belong to Squonkers and Squonkers Exchange groups on Facebook. And know what is going on with them. Or can tell me what (Group has been Archived) means going forward?
     
    So619Cal likes this.
  29. BrewBear

    BrewBear Gold Contributor Member For 1 Year

    Blog Posts:
    0
    Joined:
    Jul 23, 2016
    Messages:
    4,407
    That sucks for you friend, I was offering to send you a couple of pairs of coils to try out. If you wrap your own, they're pretty easy to make, shoot me a pm and I'll link you to the post where I first saw them.
     
  30. DogMan

    DogMan VU Donator Gold Contributor Member For 1 Year

    Blog Posts:
    0
    Joined:
    Jan 15, 2016
    Messages:
    3,612
    we can view it, but no longer post
     
  31. Sonar505

    Sonar505 Bronze Contributor Member For 3 Years

    Blog Posts:
    0
    Joined:
    Aug 5, 2014
    Messages:
    422
    Ok Thanks . Did you happen to hear why it was archived?
     
  32. DogMan

    DogMan VU Donator Gold Contributor Member For 1 Year

    Blog Posts:
    0
    Joined:
    Jan 15, 2016
    Messages:
    3,612
    maybe since no one used it much? all in squonkers paradise, or the squonkers paradise clone [think it is called squonkers paradise international]

    all the vendors and group buys use SP
     
  33. b.m.

    b.m. New Member

    Blog Posts:
    0
    Joined:
    May 21, 2017
    Messages:
    44
    Yeah,i have no idea on the meanings of the different stuff he does,but for some reason that goat head one really grabs my attention every time i see it haha.
    Those Neo's are very cool,i will get one eventually.He did a diy thing on them a while back,but it was only open for a few hours and i didn't see the post until after it closed.
    Here's one of the V2's i had printed,the other will be here in a few days,that one is all alumide,can't wait to check that one out.
    [​IMG]
     
  34. Sonar505

    Sonar505 Bronze Contributor Member For 3 Years

    Blog Posts:
    0
    Joined:
    Aug 5, 2014
    Messages:
    422
    Thanks Dogman new question is squonkers paradise on facebook one of those groups that require a referral to even see it. Plus you have to learn the secret handshake and dance to join?
     
    Proatype, BrewBear and JuicyLucy like this.
  35. Proatype

    Proatype VU Donator Silver Contributor Member For 1 Year

    Blog Posts:
    0
    Joined:
    Jul 11, 2016
    Messages:
    701
    Good vape mail weekend!
    :bingo:

    Got the hype beast finally...
    Busy with work so will have to wait until Monday to give 'er a spin. Only enough time for a sexy photo...
    ; )

    IMG_3028.JPG
     
  36. Train

    Train Silver Contributor Member For 3 Years

    Blog Posts:
    0
    Joined:
    Jun 26, 2014
    Messages:
    890
    Enjoy!

     
    Proatype likes this.
  37. Nevweezy

    Nevweezy VU Donator Silver Contributor Member For 1 Year

    Blog Posts:
    0
    Joined:
    Apr 25, 2016
    Messages:
    1,376
    I didnt know there was a group called Sqounkers Paridise, i thought the only two where the Sqounkers Paradise International and Sqounkers Paradise International BST. I just tried looking and cant seem to locate it.
     
  38. Nevweezy

    Nevweezy VU Donator Silver Contributor Member For 1 Year

    Blog Posts:
    0
    Joined:
    Apr 25, 2016
    Messages:
    1,376
    f1r3b1rd and SirVtHondaGuy08 like this.
  39. SirVtHondaGuy08

    SirVtHondaGuy08 Gold Contributor Member For 1 Year

    Blog Posts:
    0
    Joined:
    Sep 6, 2015
    Messages:
    3,455
    Nevweezy, f1r3b1rd and Proatype like this.
  40. Bardiel003

    Bardiel003 New Member

    Blog Posts:
    0
    Joined:
    Aug 9, 2017
    Messages:
    84
    Yup. I'm in the group as well. Mainly for sales and whatnot. And sometimes they talk abiut squonking like we do here lol!
     
    Nevweezy and Proatype like this.
  41. Proatype

    Proatype VU Donator Silver Contributor Member For 1 Year

    Blog Posts:
    0
    Joined:
    Jul 11, 2016
    Messages:
    701
    Benji just posted the HALF's up for grabs today...
    Suuuper nice ones this week.
    I'm out of commission but if any of you are going for it, May The Force Be With You!

    IMG_3057.JPG
     
  42. Bardiel003

    Bardiel003 New Member

    Blog Posts:
    0
    Joined:
    Aug 9, 2017
    Messages:
    84
    Holy shit those are unique... I wonder how they open? Hmmm ^^ how much?
     
  43. Proatype

    Proatype VU Donator Silver Contributor Member For 1 Year

    Blog Posts:
    0
    Joined:
    Jul 11, 2016
    Messages:
    701
    £165 + £15 shipping to the US
    Delrin & stab and/or resin.
    Interchangeable. A lot of the owners trade ''halfs"
    Every Sunday is the randomizer.
    A big unicorn hunting day for a lot of folks!

    IMG_3058.JPG IMG_3059.JPG IMG_3060.JPG IMG_3061.JPG
     
  44. Bardiel003

    Bardiel003 New Member

    Blog Posts:
    0
    Joined:
    Aug 9, 2017
    Messages:
    84
    Proatype likes this.
  45. f1r3b1rd

    f1r3b1rd Phantom Pilot Staff Member Senior Moderator VU Donator Diamond Contributor Member For 2 Years

    Blog Posts:
    2
    Joined:
    Feb 23, 2015
    Messages:
    17,108
    I honestly couldn't tell you, I took the advice from someone I trusted and it works great; and was easy to cut and fold. I know electronics, but when it comes to metallurgy, I get lost.

    BAM crew
     
  46. SteelDriver

    SteelDriver Silver Contributor Member For 1 Year

    Blog Posts:
    0
    Joined:
    Apr 5, 2016
    Messages:
    714
    Toaster mods has list up for these new V3 squonk from both sides. And no square bottles. Not on shape ways yet just doors buttons. buttons[​IMG][​IMG]

    Sent from my SHIELD Tablet K1 using Tapatalk
     
    all_thumbs, b.m., km00 and 3 others like this.
  47. KadlyDoWrong

    KadlyDoWrong Squonk 'em if you got 'em VU Donator Gold Contributor Member For 1 Year

    Blog Posts:
    0
    Joined:
    Apr 3, 2016
    Messages:
    3,717
    They came so close to a design I actually would have considered...
    I'll stick with my Coppervapes I guess.

    As Maxwell Smart would say
     
  48. Wicked Gene

    Wicked Gene Bronze Contributor Member For 2 Years

    Blog Posts:
    0
    Joined:
    May 28, 2015
    Messages:
    231
    I own several TD's and they are great mods. The V3 is Marks newest design and the body will not be on shapeways anytime soon. The doors and buttons are available so you can customize your mod. The V3 is not available in allumide yet. Mark is an excellent designer and always at the other end of a msg to help you out with any questions, as is the TD community. If your looking for a 3d printed mod that won't break the bank, then give TD a try.
    Here are a few that i own,
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]


    Sent from my iPhone using Tapatalk Pro
     
    all_thumbs, b.m., MaxPerilous and 5 others like this.
  49. Proatype

    Proatype VU Donator Silver Contributor Member For 1 Year

    Blog Posts:
    0
    Joined:
    Jul 11, 2016
    Messages:
    701
    Really surprising that hardly anyone is jumping on that list. He added the older models to it too, I personally prefer the V2 classic box style, if I didn't already have 4 mods en route I'd pounce.
    I've been on a bender again and need to chilllllll.... I seem to have the Midas Touch on those stupid lists!
     
    km00 and SteelDriver like this.
  50. Proatype

    Proatype VU Donator Silver Contributor Member For 1 Year

    Blog Posts:
    0
    Joined:
    Jul 11, 2016
    Messages:
    701
    Nice Toaster family dude!
    I really dig the door of the top one with the toast logo in the corner & the text up the side. Super clean.
     
    Wicked Gene likes this.

Share This Page

Close This Message