Recently there was a post asking where to find this mod. (If you have not seen one before, check this link to prior post - nice pics)
As I got one just a month or so from the "Facebook Group Buy" on 3fVape, I too was interested in some spares - at least for the casing, which is really rather nice. So, I looked into this further and found these two links:
amanda mao
...
hi dear, thank you for your inquiry about our product. the boxer mod have a promotion now,only 15$/pcs,moq is 50pcs.and we are manufacturer ,if you need mod or accessaries,can do OEM,we also accept that. Best regards, Amanda
I have no idea if she ever got my reply where I asked about shipping costs extra or included, and she never did answer the question about just the mod w/o the control-board. I suspect this is another of those no-reply emails.
In any event, at least 2 other people are interested, (@deezdrama @Zaxxaz @Heartsdelight ), and I figured I might as well post the info here in hopes someone understanding co-op/group-buy will see and be able to help out, as well as drum up any interest in such a buy.
Various Reviews, including this clone by @Vaping With Vic (the Rattray issue was interesting, as my first box never leaked inside, but it came with the plastic-collar above the elbow broken)
So, we are looking for anyone able to at least COACH thru a group-buy if not run it, and we are looking for folks interested in buying X units. Let's hammer this out!
Current Count: 10
3: @PoppaVic
1: @Vape Fan
2: @b.m.
2: @priest2705
2: @Zaxxaz
As I got one just a month or so from the "Facebook Group Buy" on 3fVape, I too was interested in some spares - at least for the casing, which is really rather nice. So, I looked into this further and found these two links:
- https://www.alibaba.com/product-det...alleryofferlist.normalList.139.604576ebqlOk5q
- https://www.alibaba.com/product-det...galleryofferlist.normalList.74.604576ebqlOk5q
amanda mao
...
hi dear, thank you for your inquiry about our product. the boxer mod have a promotion now,only 15$/pcs,moq is 50pcs.and we are manufacturer ,if you need mod or accessaries,can do OEM,we also accept that. Best regards, Amanda
I have no idea if she ever got my reply where I asked about shipping costs extra or included, and she never did answer the question about just the mod w/o the control-board. I suspect this is another of those no-reply emails.
In any event, at least 2 other people are interested, (@deezdrama @Zaxxaz @Heartsdelight ), and I figured I might as well post the info here in hopes someone understanding co-op/group-buy will see and be able to help out, as well as drum up any interest in such a buy.
- At $15@, you can get a good ABS casing and the 90/90 squonk-elbow at the very least.
- Fits atties over 30mm with ease.
- You can use the generic, cheap silicone bottles.
- Folks have stuffed DNA250c's inside, and I know my PWM board will fit inside, (I just want a spare or 3 before I start tinkering ;-).
- These mods come with 18650 adapters and can fit 20700 natively.
- You are "limited" to Bypass/VV and VW - no TC.
- Personally, I have found the VW seems wonky: my basium running the same atty, coil, ejuice, watts tastes "right" in VW, but the SXK is "off" - switching to VV, the SXK returns to tasting "right".
- Opening the mod to swap cells is a non issue: I tend to use the key from my DS-style or a coin to "twist" in the open-edges, and that pops one side free - I don't keep nails long enough to claw it open.. After a month or so, the ABS has "worked in", and you can much more easily open the casing by hand.
- Three colors, but seriously: stick to black - Black, Dark blue, Light Blue.
Various Reviews, including this clone by @Vaping With Vic (the Rattray issue was interesting, as my first box never leaked inside, but it came with the plastic-collar above the elbow broken)
So, we are looking for anyone able to at least COACH thru a group-buy if not run it, and we are looking for folks interested in buying X units. Let's hammer this out!
[edit:
well, I did get the Varitube v2 BF 510 mounted. But, I decided to give it a whirl with the old PCB and await a spare before I start screwing with the PWM board install. I had to cut a new length of fuel-line for my squonk-bottle, but it's only slightly longer and bends.
Oh, the 90/90 elbow did NOT fit the V2 threaded squonk-pin, so I've put all of that aside. I suspect a length of ss316L in 28-36awg can be wrapped and threaded on the pin like Helicoils used by mechanics: this would let you thread the pin into the 90/90 elbow. So might PTFE tape.
Otherwise, it's vaping fine - no muss or fuss, no puddles or drips.]
well, I did get the Varitube v2 BF 510 mounted. But, I decided to give it a whirl with the old PCB and await a spare before I start screwing with the PWM board install. I had to cut a new length of fuel-line for my squonk-bottle, but it's only slightly longer and bends.
Oh, the 90/90 elbow did NOT fit the V2 threaded squonk-pin, so I've put all of that aside. I suspect a length of ss316L in 28-36awg can be wrapped and threaded on the pin like Helicoils used by mechanics: this would let you thread the pin into the 90/90 elbow. So might PTFE tape.
Otherwise, it's vaping fine - no muss or fuss, no puddles or drips.]
Current Count: 10
3: @PoppaVic
1: @Vape Fan
2: @b.m.
2: @priest2705
2: @Zaxxaz
Last edited: