Tank Question

[James0125]

Will the kanger nano s tank work on the smok 220w alien? i have the .5ohm coil in the tank. what wattage would work on the tank?

 

[JuicyLucy]

It will work fine. Start low, 20 watts or so, and go up a watt or two after each hit until you hit your sweet spot

 

[HellbillyRJ]

Yes it will work. Start around 30 watts and increase in 2-5 watt increments as necessary to get the hit you want. Probably not higher than 65 or 70 watts. I'm not familiar with the tank or set up, so the max could be +/-

Sent from my ZTE A2017U using Tapatalk

 

[Countrypami]

Will the kanger nano s tank work on the smok 220w alien? i have the .5ohm coil in the tank. what wattage would work on the tank?

It might look a little awkward on such a large mod, but it will function fine. Wattage will depend on the coils you put in the tank. I vape my .5's around 22 watts.

 

[JuicyLucy]

Yes, everyone's coils and preference will be different, that is why you should start low

If you start too high, you might end up burning the coil or other unpleasantness

 

[f1r3b1rd]

I'm not sure which 0.5 ohm Kanger head you're talking about, I know of 2.

1- The Kanger 0.5 ohm ceramic head suggests 35-40
Of it were me, I would start around 25w and tick up a watt or 2 until I liked it

2- the Kanger 0.5 ohm kanthal head suggests 15- 30w.
If it were me I would start around 15 and tick up 1-2 watts and go from there.


Don't worry about anything other than what works for you.

Sent from my XT1650 using Tapatalk