The UWell Crown III Coils are no nonsense atomizer heads for the Uwell Crown III Tank. Designed with the average vaper in mind, it has an easy-to-install Plug-Pull mechanism to replace them when you need to. You can either get the 0.5ohm resistance (graded for 70-80W) or 0.25ohm resistance (graded for 80-90W). These stainless steel coils also have massive wicking ports with pure organic cotton to help your juice get to the coil effortlessly. Ensure you're getting the best results from your Uwell Crown III Tank with Crown's official coils.
When look at Uwell crown 3 coil, the first feeling is it's a solid coil, well-built cotton and good quality wires.
It doesn't have any threads on the coils but 2 silicone rings, so when replace the coil, you don't need to screw out and in just need to pull out the old coil and insert the new one.
On the bottom for electrode, it's a large area and gold plated which support fast electric conduction and few loss for the power.
For the 2 different ohms, one is 0.5ohm resistance (graded for 70-80W) and the other 0.25ohm resistance (graded for 80-90W). Both are great for a deep vaping.
Okay, so do you want to try this? Or if you have already have one, how do you feel about it?
When look at Uwell crown 3 coil, the first feeling is it's a solid coil, well-built cotton and good quality wires.
It doesn't have any threads on the coils but 2 silicone rings, so when replace the coil, you don't need to screw out and in just need to pull out the old coil and insert the new one.
On the bottom for electrode, it's a large area and gold plated which support fast electric conduction and few loss for the power.
For the 2 different ohms, one is 0.5ohm resistance (graded for 70-80W) and the other 0.25ohm resistance (graded for 80-90W). Both are great for a deep vaping.
Okay, so do you want to try this? Or if you have already have one, how do you feel about it?
Last edited: