Discussion in '"How To" - Rebuilding Tutorials' started by Cid6.7, Aug 1, 2016.
I followed this guys tutorial & worked perfectly !
Thanks for the post. I'd be interested to hear how long your home made coil lasts. I just got a Crown tank and may start making coils in the future.
I dont remove the outter shell cotton. I leave the cotton thats in there and just replace the inner coil/cotton
Yeah I didnt replace it either the 1st couple times. But may aswell while your in there.
9 wraps with 26g kanthol gives me a reading of 2.09ohms think
I might go grab some thicker wire I've only ever use 26g will thicker drop the ohms ?
Grabbed some 24g Stainless steel works MUCH better than the 26 & get a reading of .29 ohms
I have 2 Crowns & have these rbas in both. I absolutely love them! They are just as easier to build than the iSub rba for sure! In these I use a 26g Kanthal, 7 wrap for an end result of .8. I use Native Wicks rather than Japenese cotton, but the kit come with plenty of Japanese cotton however. I got mine at myvaporstore.com for around $10. It's definitely worth it if you love your crown tank!
I have one of these coming for my crown tank. Good to hear that they work well.
Just as easy to rebuild the stock coils...
Let me know how you like it!
i was using 26 and ran out, on your say i bought some 24. Do you wrap in parallel like the vid or single to get .29?
Damn sorry I didnt see your reply by now I'm sure you've figured it out tho..lol I used the dual wrap..
Yes i figured it out, try twisting together two 24ga or 26ga wires. A littler harder tk seat the positive pin but very nice wharm flavourful vape
Every coil I put in even store bought coils I take my little side cutters and trim them all just below the lip of the rubber grommet, this way there is 0 chance of any juice leaking out & much easier to seat. Especially on the cloud beast coils they use such thick wire idk how any juice stayed in the tank lol
for now i usually use store bought as i dont have lots of time to build them.
but every dead coil gets cleaned and “guttet” then i store all the bits in a container so now im up to around 50 “blank” coils. So if the world ran out lf crown coils i would have my own special stash of blanks.