Vaptio Turbo RDTA -L 2 in 1 RDTA or RDA

Discussion in 'General Rebuildable Discussion (RTA/RBA/RDA)' started by mjag, Jul 12, 2017.

  1. mjag

    mjag Gold Contributor Member For 2 Years

    Blog Posts:
    0
    Joined:
    Jul 16, 2015
    Messages:
    3,274
    I did a search but didn't find any info on this RDTA/RDA so decided to start a thread.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    More info here: https://vaptio.com/catalogue/rdta-tank_87/#

    Just got mine a little while ago, so far I like the build quality and the vape I am getting. Planning on putting a few more builds in it and trying the RDA section before doing a final review.

    [​IMG]

    [​IMG]
     
    Last edited: Jul 12, 2017
  2. KingPin!

    KingPin! Gold Contributor

    Blog Posts:
    0
    Joined:
    Dec 23, 2016
    Messages:
    2,336
    Built mine up the other day Mjag absolutely awesome flavour I get on this one.... its right up there as one of my best RDTAs in that department

    for sure needs a big ass dual coils though to get the best from it, it's a builders wet dream for that I was able to get 10mm wide coils in there and I still had room

    However it's not without a few flaws for me Like the drip tip needs to swappable, and it does get bloody hot at the top prefer the grub screws to be slightly bigger in the posts

    For a first time launch though not a bad bloody effort you know gonna spend bit more time with mine really work out it quirks before I pass final judgement on it
     
  3. Deucesjack

    Deucesjack Senior Moderator Staff Member Senior Moderator VU Donator Platinum Contributor Member For 1 Year ECF Refugee

    Blog Posts:
    0
    Joined:
    Sep 8, 2015
    Messages:
    7,799
    Yeah I got one too. This thing has some good flavor but she is a juice whore. Doing a full review soon.
     
    gakudzu, Heartsdelight and mjag like this.
  4. KingPin!

    KingPin! Gold Contributor

    Blog Posts:
    0
    Joined:
    Dec 23, 2016
    Messages:
    2,336
    Agree with that one DJ, yeah DIY juice only on this unless you have deep pockets!

    what coils are you running in it?
     
    Heartsdelight, Deucesjack and mjag like this.
  5. mjag

    mjag Gold Contributor Member For 2 Years

    Blog Posts:
    0
    Joined:
    Jul 16, 2015
    Messages:
    3,274
    I agree @KingPin!, the drip tip is a little too small, would be nice if I could swap it out.

    I am finding I like to take out the spitback guard, not a huge jump but a little better flavor.

    The flavor and vape quality so far trumps the slight cons. Impressed with the build quality too.

    Sent from my SM-N910P using Tapatalk
     
    gakudzu, Heartsdelight and KingPin! like this.
  6. Deucesjack

    Deucesjack Senior Moderator Staff Member Senior Moderator VU Donator Platinum Contributor Member For 1 Year ECF Refugee

    Blog Posts:
    0
    Joined:
    Sep 8, 2015
    Messages:
    7,799
    Dual Juggernauts.

    Sent from my LG-K425 using Tapatalk
     
    Heartsdelight, KingPin! and mjag like this.
  7. KingPin!

    KingPin! Gold Contributor

    Blog Posts:
    0
    Joined:
    Dec 23, 2016
    Messages:
    2,336
    Damn mate I haven't tried that yet I will do later though ...the anti spitback thing works really well though so didn't see a need to remove it before ...I guess because the chamber is high might not be needed

    These are the coils I'm running in mine made them for the Merlin RDTA at the time because it seems to be one of the few decks that can take larger coils on the 25mm front but now I have this RDTA can't see I'll be using the Merlin much now better flavour and vape experience out of this for me

    I like that channel in particular tells you where to place your coils perfectly

    IMG_1270.JPG


    IMG_1376.JPG
     
  8. mjag

    mjag Gold Contributor Member For 2 Years

    Blog Posts:
    0
    Joined:
    Jul 16, 2015
    Messages:
    3,274
    Yep, likes juice, seems like all the great flavor RDTA's are juice hogs

    Sent from my SM-N910P using Tapatalk
     
    Heartsdelight and Deucesjack like this.
  9. mjag

    mjag Gold Contributor Member For 2 Years

    Blog Posts:
    0
    Joined:
    Jul 16, 2015
    Messages:
    3,274
    Those are some great looking coils!

    Sent from my SM-N910P using Tapatalk
     
    elegomall, Heartsdelight and KingPin! like this.
  10. mjag

    mjag Gold Contributor Member For 2 Years

    Blog Posts:
    0
    Joined:
    Jul 16, 2015
    Messages:
    3,274
    I agree on being better than the Merlin RDTA by a long shot for me, the Merlin RDTA was a dog with flees. I was expecting a lot more, one of the few Augvape tanks I didn't like.

    Sent from my SM-N910P using Tapatalk
     
    Heartsdelight and Deucesjack like this.
  11. Deucesjack

    Deucesjack Senior Moderator Staff Member Senior Moderator VU Donator Platinum Contributor Member For 1 Year ECF Refugee

    Blog Posts:
    0
    Joined:
    Sep 8, 2015
    Messages:
    7,799
    Yep totally hyped up by a few. At best it was an OK RDTA. Maybe next time they'll listen to more than a few beta testers.

    Sent from my LG-K425 using Tapatalk
     
    Last edited: Jul 13, 2017
    Heartsdelight and mjag like this.
  12. KingPin!

    KingPin! Gold Contributor

    Blog Posts:
    0
    Joined:
    Dec 23, 2016
    Messages:
    2,336
    I dunno it wasn't that bad guys but then again I was running massive coils in there? I actually enjoyed it apart from the drip design and draw this is better though for sure
     
    Heartsdelight, mjag and Deucesjack like this.
  13. Deucesjack

    Deucesjack Senior Moderator Staff Member Senior Moderator VU Donator Platinum Contributor Member For 1 Year ECF Refugee

    Blog Posts:
    0
    Joined:
    Sep 8, 2015
    Messages:
    7,799
    It wasn't bad but it wasn't the end all be all that some made it out to be.

    Sent from my LG-K425 using Tapatalk
     
  14. KingPin!

    KingPin! Gold Contributor

    Blog Posts:
    0
    Joined:
    Dec 23, 2016
    Messages:
    2,336
    Agree with that DJ
     
    Deucesjack likes this.
  15. KingPin!

    KingPin! Gold Contributor

    Blog Posts:
    0
    Joined:
    Dec 23, 2016
    Messages:
    2,336
    I'm running 3mm coils in here at the mo either of you guys tried 3.5 or 4mm I reckon it could hold them ok?
     
    elegomall likes this.
  16. mjag

    mjag Gold Contributor Member For 2 Years

    Blog Posts:
    0
    Joined:
    Jul 16, 2015
    Messages:
    3,274
    I started off with the claptons already included in the pack. Going to rebuild using some triple core parallel claptons in the next few days. Going to try 3.5mm to see how that goes.

    Sent from my SM-N910P using Tapatalk
     
    elegomall likes this.
  17. KingPin!

    KingPin! Gold Contributor

    Blog Posts:
    0
    Joined:
    Dec 23, 2016
    Messages:
    2,336
    Let me know mate especially on the wicking front whether it's tight or not :)
     
  18. Paratech

    Paratech I forgot VU Donator Gold Contributor Member For 1 Year

    Blog Posts:
    1
    Joined:
    Dec 8, 2015
    Messages:
    2,661
    I went with 3x26/36SS 4.5mm ID Alien Claptons in mine and liked it a lot.
    Yes, it IS very thirsty as mentioned and has protruding edges on the bottom but it has some nice "PROs".
    Like 5ml juice capacity, Velocity style deck, easy fill, 25mm and is changeable from RDTA to RDA.
     
    KingPin! and mjag like this.
  19. KingPin!

    KingPin! Gold Contributor

    Blog Posts:
    0
    Joined:
    Dec 23, 2016
    Messages:
    2,336
    4.5mm holy crap never gone that big! Nice para thanks for the info

    MJag I took out the spit gaurd you are right it's not really needed on here at all mate I've had no spit back what so ever
     
    Last edited: Jul 14, 2017
    mjag and elegomall like this.
  20. mjag

    mjag Gold Contributor Member For 2 Years

    Blog Posts:
    0
    Joined:
    Jul 16, 2015
    Messages:
    3,274
    4.5mm....wow, never used that big either, makes me want to try it out, problem is I don't have a post that big....lol.

    Hey @Paratech does it get way hot with the 4.5mm coils?

    Yeah, KP, I don't get much spitback either with that guard removed. Pretty cool to have the option though.

    Sent from my SM-N910P using Tapatalk
     
  21. Paratech

    Paratech I forgot VU Donator Gold Contributor Member For 1 Year

    Blog Posts:
    1
    Joined:
    Dec 8, 2015
    Messages:
    2,661
    Chainvaping in TC 100 watts @ 425° it gets warm but not hot.
    Normally I'd run about 480° but get everything I need from this at 425°.

    I also tested with and without the anti-spit back piece.
    No spit back either way and agree having the choice is nice.
    I little more flavor with it removed.
     
    KingPin! and mjag like this.
  22. KingPin!

    KingPin! Gold Contributor

    Blog Posts:
    0
    Joined:
    Dec 23, 2016
    Messages:
    2,336
    What are the orings like on yours? Mine feel like they could be a little tighter on the AFC ring it's not like top comes off when I pick it up with the mod attached but dunno whether I'd want to shake if you know what I mean

    My drip tip is nice and tight though
     
  23. Paratech

    Paratech I forgot VU Donator Gold Contributor Member For 1 Year

    Blog Posts:
    1
    Joined:
    Dec 8, 2015
    Messages:
    2,661
    While I laugh at all the WRONG replies that first came to mind:

    Yes, the O-rings are a bit on the thin side and the AFC would be a little more secure, I agree it isn't going to fall off.
    I thought I was really going to like that particular drip tip, turns out I am wishing I had a replacement for one that was just a bit taller.
    But after a few hits the flavor makes me forget about it.
     
    KingPin! likes this.
  24. KingPin!

    KingPin! Gold Contributor

    Blog Posts:
    0
    Joined:
    Dec 23, 2016
    Messages:
    2,336
    :giggle:
     
  25. gakudzu

    gakudzu Gold Contributor

    Blog Posts:
    0
    Joined:
    Oct 6, 2016
    Messages:
    2,380
    Just now seeing this review. Damn anti-review "spam" crybabies are harshing my mellow :cuss2:

    Definitely gotta try this rdta. Thanks @mjag, and @KingPin!
     
  26. gakudzu

    gakudzu Gold Contributor

    Blog Posts:
    0
    Joined:
    Oct 6, 2016
    Messages:
    2,380
    Any idea who has it in stock? Not getting any joy from Google, and the Vaptio page says "Unavailable".
     
  27. KingPin!

    KingPin! Gold Contributor

    Blog Posts:
    0
    Joined:
    Dec 23, 2016
    Messages:
    2,336
    You'll like it mate still working on my review for it at the moment...got a few things I'm still nailing down on the improvements side but it's a pretty nifty RDTA....beats the Pindad for me in flavour category but not build quality that reflects in the price though...it also drinks like a fish, there are a few things that need improving on the next iteration turbo, Mach three or whatever they come up with LoL ....more wicking is not a bad thing on here id go as far as saying 3mm is the minimum but probably bigger coils are needed ...temp control is the way to go ...but youre sorted in that front :). !!
     
    mjag and gakudzu like this.
  28. KingPin!

    KingPin! Gold Contributor

    Blog Posts:
    0
    Joined:
    Dec 23, 2016
    Messages:
    2,336
    Hmmm was there the other day when I checked mate I'll take a butchers about
     
    gakudzu likes this.
  29. gakudzu

    gakudzu Gold Contributor

    Blog Posts:
    0
    Joined:
    Oct 6, 2016
    Messages:
    2,380
    Big coils and TC? Sounds like it's right in my wheelhouse. I have the Merlin and the Ijoy Combo, and I've found I really enjoy RDTAs. A SS/Red Turbo would be a great match for my red G2 LE.
    Much appreciated!
     
    mjag likes this.
  30. KingPin!

    KingPin! Gold Contributor

    Blog Posts:
    0
    Joined:
    Dec 23, 2016
    Messages:
    2,336
    I have the Merlin as well mate ...this is better than the Merlin by quite a margin
     
    mjag and gakudzu like this.
  31. mjag

    mjag Gold Contributor Member For 2 Years

    Blog Posts:
    0
    Joined:
    Jul 16, 2015
    Messages:
    3,274
    Just installed some 4mm ID triple core parallel claptons. Since there SS316L and a little springy there more like 4.2mm ID. @Paratech was right, this thing rocks with big coils! Rocking it in RDA mode but technically it is still an RDTA, holds 2ml of juice now.

    I am actually digging the look in RDA mode better and a lot more airflow than the Medusa Reborn.

    [​IMG][​IMG][​IMG]

    Sent from my SM-N910P using Tapatalk
     
  32. Paratech

    Paratech I forgot VU Donator Gold Contributor Member For 1 Year

    Blog Posts:
    1
    Joined:
    Dec 8, 2015
    Messages:
    2,661
    It's just been a bad ass RDTA/RDA for me so far.
    Pretty happy with it.
     
    gakudzu, Deucesjack and mjag like this.
  33. KingPin!

    KingPin! Gold Contributor

    Blog Posts:
    0
    Joined:
    Dec 23, 2016
    Messages:
    2,336
    @gakudzu i reached out to Vaptio mate to find out where it's being sold. I'll come back with what they say
     
    gakudzu, Paratech and MWorthington like this.
  34. KingPin!

    KingPin! Gold Contributor

    Blog Posts:
    0
    Joined:
    Dec 23, 2016
    Messages:
    2,336
    mjag and gakudzu like this.
  35. gakudzu

    gakudzu Gold Contributor

    Blog Posts:
    0
    Joined:
    Oct 6, 2016
    Messages:
    2,380
  36. mjag

    mjag Gold Contributor Member For 2 Years

    Blog Posts:
    0
    Joined:
    Jul 16, 2015
    Messages:
    3,274
    KingPin! and gakudzu like this.
  37. KingPin!

    KingPin! Gold Contributor

    Blog Posts:
    0
    Joined:
    Dec 23, 2016
    Messages:
    2,336
    According to the vaptio contact I have they do have distibutors but main sales are direct through thier own website maybe keep an eye out mate and post up if you see anywhere else as well as I'd like to know this myself :)
     
    mjag and gakudzu like this.
  38. KingPin!

    KingPin! Gold Contributor

    Blog Posts:
    0
    Joined:
    Dec 23, 2016
    Messages:
    2,336
    Replaced all my orings today MJag much better than the ones pre installed little tighter on everything now

    Also tried to wick it differently than it says to in the instruction book ....in that I assembled it all first then poked the cotton down the holes, so much easier I'll be doing that from now on as the cotton doesn't get snagged on the threads creating gaps, Which was leading to oversaturating my cotton when vaping
     

Share This Page

Close This Message