Wanna build first Clapton

[Bucky205]

Yea 4 weeks now no cigs at all feel great too me and the wife both itnjas actually turned in to a hobby i love it found jucie that I love almost can't stay away from my dripper lol but I love my smok tank with the quads too lol

Sent from my SM-G928V using Tapatalk

Making your own juice is a lot of fun as well. They have some great recipes in the DIY section. Imagine something you really like costing $1.

 

[Villagedavis]

Making your own juice is a lot of fun as well. They have some great recipes in the DIY section. Imagine something you really like costing $1.

I need to work on coils first lol

Sent from my SM-G928V using Tapatalk

 

[Villagedavis]

Making your own juice is a lot of fun as well. They have some great recipes in the DIY section. Imagine something you really like costing $1.

Where do you get the stuff to make it from

Sent from my SM-G928V using Tapatalk

 

[iSubOhm]

I think MVS has. DIY section as well as MBV has an easier DIY method

Calls To Action! casaa.org

 

[Bucky205]

Where do you get the stuff to make it from

Sent from my SM-G928V using Tapatalk

Find something you would like to make. Start a thread in the DIY section, people will usually provide recipes. Then shop it, there's a lot of good vendors. For me, it depends on who has the most in stock, and price, for what flavors I need.

 

[Villagedavis]

Find something you would like to make. Start a thread in the DIY section, people will usually provide recipes. Then shop it, there's a lot of good vendors. For me, it depends on who has the most in stock, and price, for what flavors I need.

Is it OK that my battery icon is jumping when I fire it

Sent from my SM-G928V using Tapatalk

 

[Villagedavis]

I think it's just that your leads might not be completely secure. Sure the thicker twisted wire is a bit tougher to get into those posts. Try kind of wrapping the ends around the screws before you tighten them down? I saw a 6 wrap of twisted 28g. How many wraps are you doing?

Calls To Action! casaa.org

new setup running .14 lovin it

Sent from my SM-G928V using Tapatalk

 

[Villagedavis]

I finally did it built my first working coil 26ga twisted 6 wraps running .46 on krangertech subomh plus

Sent from my SM-G928V using Tapatalk

 

[Bucky205]

I finally did it built my first working coil 26ga twisted 6 wraps running .46 on krangertech subomh plus

Sent from my SM-G928V using Tapatalk

Sweet! How does it vape?

 

[iSubOhm]

Is it OK that my battery icon is jumping when I fire it

Sent from my SM-G928V using Tapatalk

Yes. Your meter on your mod is just measuring for the load your coil is taking from your batteries.

Calls To Action! casaa.org

 

[Villagedavis]

Sweet! How does it vape?

It's pretty good considering my first complete build lol don't really have anything to compare it to. It does make the jucie hot and the taste is strong inhad to turn it down to 40w

Sent from my SM-G928V using Tapatalk

 

[iSubOhm]

I finally did it built my first working coil 26ga twisted 6 wraps running .46 on krangertech subomh plus

Sent from my SM-G928V using Tapatalk

Congrats it'll keep getting easier and better from here.

I'm out of cotton currently.. So no building for me And I couldn't find a store with any in time today.. I ordered a big pack from Amazon probably Thursday? Estimated delivery told me after I ordered is Dec. 28th lol

Calls To Action! casaa.org

 

[Villagedavis]

Congrats it'll keep getting easier and better from here.

I'm out of cotton currently.. So no building for me And I couldn't find a store with any in time today.. I ordered a big pack from Amazon probably Thursday? Estimated delivery told me after I ordered is Dec. 28th lol

Calls To Action! casaa.org

Oh crap no cotton lol ima vape this coil for a while before I build another I'm waiting on my 2day shipping from vapedna of my koopor 200w that I ordered Wednesday lol

Sent from my SM-G928V using Tapatalk

 

[iSubOhm]

Oh crap no cotton lol ima vape this coil for a while before I build another I'm waiting on my 2day shipping from vapedna of my koopor 200w that I ordered Wednesday lol

Sent from my SM-G928V using Tapatalk

Think we have bad luck lmao. Got some swivels and 34g for claptons coming as well. Oh buddy I want that Koopor, but I got one more RDA I'll probably get and that's it for awhile because she's a pretty penny.. And I've been buying too much crap lately lol. Went on a vape spree.

Calls To Action! casaa.org

 

[Villagedavis]

Think we have bad luck lmao. Got some swivels and 34g for claptons coming as well. Oh buddy

Calls To Action! casaa.org

Yea the only place I have good luck shipping is Amazon

Sent from my SM-G928V using Tapatalk

 

[Bucky205]

Congrats it'll keep getting easier and better from here.

I'm out of cotton currently.. So no building for me And I couldn't find a store with any in time today.. I ordered a big pack from Amazon probably Thursday? Estimated delivery told me after I ordered is Dec. 28th lol

Calls To Action! casaa.org

In a pinch. you can use any sterile cotton, boil it an let it dry. Cotton balls, qtips, tampons, all work.

 

[iSubOhm]

In a pinch. you can use any sterile cotton, boil it an let it dry. Cotton balls, qtips, tampons, all work.

Honestly I don't trust boiling it removes any pesticide or anything else in them when grown

Calls To Action! casaa.org

 

[Villagedavis]

OK so you guy know I built the twisted coil and running .46 but for some reason my jucie is really strong can't even vape it I thought maybe it's the jucie so I dripped a little of it and nope smooth ass glass what could be the problem

Sent from my SM-G928V using Tapatalk

 

[iSubOhm]

OK so you guy know I built the twisted coil and running .46 but for some reason my jucie is really strong can't even vape it I thought maybe it's the jucie so I dripped a little of it and nope smooth ass glass what could be the problem

Sent from my SM-G928V using Tapatalk

What's your usual build and what's the ohms read on it?

Calls To Action! casaa.org

 

[Villagedavis]

That's my first build lol it reads .46

Sent from my SM-G928V using Tapatalk

 

[iSubOhm]

So harsh in your tank, but smooth in your dripper? What's your usual build and ohms in your dripper? Could be the airflow is more restricted in your tank causing it to be much hotter than in your dripper. Making it harsher on the throat. Does it seem much warmer in your tank as well? Don't have much expierience with RTAs as I've only had one in my vaping lifetime and that was many moons ago. Never put a twisted build in it either, it was a Kayfun.

Calls To Action! casaa.org

 

[Villagedavis]

One dripper is .12 quad twisted and the other is .23 claptons yes its a minty jucie and that's all you can taste but in the dripoer s and other tanks you can its not that strong I might be newbing it lol

Sent from my SM-G928V using Tapatalk

 

[iSubOhm]

Assume you're being safe on that .12 build Sounds just like your tank has more restricted airflow than your dripper does. I'd love someone else's input on if I could be correct. But .4 on a sub ohm style tank seems right on par. Is it so harsh that you can hardly vape it?

Calls To Action! casaa.org

 

[Villagedavis]

The .12 is on my mutation x v4 been using it on the snow wolf safe? Yea Its too strong I can't vape it

Sent from my SM-G928V using Tapatalk

 

[iSubOhm]

Oh snow wolf has built in safety features, you're good. As far as the tank, maybe try one more wrap or putting that airflow wide open.

Calls To Action! casaa.org

 

[Chaotic_Vapes]

new setup running .14 lovin it

Sent from my SM-G928V using Tapatalk

I've got the same mod and atty, I've bought two other attys and go back to it. It's normal for it to jump like that and I normally run dual 24s twisted at about 90-120 watts. Congrats on your set up and good luck in the vape world.


Sent from my dos terminal.

 

[scarecrowjenkins]

The .12 is on my mutation x v4 been using it on the snow wolf safe? Yea Its too strong I can't vape it

Sent from my SM-G928V using Tapatalk

That's one of the perks of a chip box, it has all manner of protection from shorts/unsafe builds and the like. As long as it fires you're all good!

 

[Villagedavis]

I've got the same mod and atty, I've bought two other attys and go back to it. It's normal for it to jump like that and I normally run dual 24s twisted at about 90-120 watts. Congrats on your set up and good luck in the vape world.


Sent from my dos terminal.

Thanks a lot I love it it's excellent

Sent from my SM-G928V using Tapatalk

 

[Villagedavis]

That's one of the perks of a chip box, it has all manner of protection from shorts/unsafe builds and the like. As long as it fires you're all good!

Oh yea she fires good and its great during work I almost hate to use a tank now I'm addicted to the mutation x v4 lol

Sent from my SM-G928V using Tapatalk

 

[Chaotic_Vapes]

Oh snow wolf has built in safety features, you're good. As far as the tank, maybe try one more wrap or putting that airflow wide open.

Calls To Action! casaa.org

I wouldn't trust the safety features too much. My atty has shorted before and it still fires, I never get the atomizer short message it's supposed to. Not trying to sound like an asshat but after 4 months with this or so I've learned its "safety features" aren't that great. Which sucks since the limiteds and royals are more advanced than the regulars and they still do this.


Sent from my dos terminal.

 

[Villagedavis]

I wouldn't trust the safety features too much. My atty has shorted before and it still fires, I never get the atomizer short message it's supposed to. Not trying to sound like an asshat but after 4 months with this or so I've learned its "safety features" aren't that great. Which sucks since the limiteds and royals are more advanced than the regulars and they still do this.


Sent from my dos terminal.

I appreciate every bit of information so what can I do to keep it safe?

Sent from my SM-G928V using Tapatalk

 

[iSubOhm]

I wouldn't trust the safety features too much. My atty has shorted before and it still fires, I never get the atomizer short message it's supposed to. Not trying to sound like an asshat but after 4 months with this or so I've learned its "safety features" aren't that great. Which sucks since the limiteds and royals are more advanced than the regulars and they still do this.


Sent from my dos terminal.

Appreciate that as well. Does Sigelei also have this issue? And to @Villagedavis just make sure you know what your batteries can handle safely. Also try turning the wattage down on your device for your tank. I keep forgetting most people use regulated devices. I'm the exact opposite have almost always been unregulated.

Calls To Action! casaa.org

 

[Villagedavis]

Appreciate that as well. Does Sigelei also have this issue? And to @Villagedavis just make sure you know what your batteries can handle safely. Also try turning the wattage down on your device for your tank. I keep forgetting most people use regulated devices. I'm the exact opposite have almost always been unregulated.

Calls To Action! casaa.org

With the .12 build i run 63w and it has 2 18650 2500mah

Sent from my SM-G928V using Tapatalk

 

[Chaotic_Vapes]

I appreciate every bit of information so what can I do to keep it safe?

Sent from my SM-G928V using Tapatalk

Safe is a relative term. For example some people don't sub ohm for safety. However I'm skipping that whole speech because it's been said a million times and it's obvious you feel comfortable with sub ohming.

For this mod I haven't had a chance to test each safety feature but I can say that mine, no clue on others, doesn't use the atomizer short message that is supposedly has. Maybe it only considers post shorts or 510 connection shorts atomizer shorts. I've had a few builds accidentally touch my deck or top cap on the mut x v4 and never got the atomizer short message. I noticed them when dry firing my coils to get them to heat evenly so it shouldn't be a problem so long as you check your coils before wicking them, which everybody does so they can align them.

If they do end up touching your top cap or deck while vaping you'll be fine and you'll notice instantly because you'll get a straight hit of Satan's anus. If you somehow can vape that, I can, it'll taste burnt and metallic and very different from burnt wick.

Also it has an improved lock feature from other models if you have the limited or royal edition, from your picture it looks like a royal if I'm not mistaken. So use your lock.

And always make sure to wipe up any leaked juice asap to keep it out of the mod. Mut x v4's are notorious for leaking through their bottom airflow and mine leaks like no other. To prevent it just drip less or pay attention to where you drip and you'll be fine, I'm just careless.

Also I'm pretty sure it's just mine but my firing button can get stuck if pushed in and then slid to a direction if that makes sense. It's only happened twice and when it does if I just push the button in and let go it normally stops. If not I push in and slide toward the center and it's good. Pretty sure I just got something stuck in it and it's in need of cleaning.


Sent from my dos terminal.

 

[Villagedavis]

Safe is a relative term. For example some people don't sub ohm for safety. However I'm skipping that whole speech because it's been said a million times and it's obvious you feel comfortable with sub ohming.

For this mod I haven't had a chance to test each safety feature but I can say that mine, no clue on others, doesn't use the atomizer short message that is supposedly has. Maybe it only considers post shorts or 510 connection shorts atomizer shorts. I've had a few builds accidentally touch my deck or top cap on the mut x v4 and never got the atomizer short message. I noticed them when dry firing my coils to get them to heat evenly so it shouldn't be a problem so long as you check your coils before wicking them, which everybody does so they can align them.

If they do end up touching your top cap or deck while vaping you'll be fine and you'll notice instantly because you'll get a straight hit of Satan's anus. If you somehow can vape that, I can, it'll taste burnt and metallic and very different from burnt wick.

Also it has an improved lock feature from other models if you have the limited or royal edition, from your picture it looks like a royal if I'm not mistaken. So use your lock.

And always make sure to wipe up any leaked juice asap to keep it out of the mod. Mut x v4's are notorious for leaking through their bottom airflow and mine leaks like no other. To prevent it just drip less or pay attention to where you drip and you'll be fine, I'm just careless.

Also I'm pretty sure it's just mine but my firing button can get stuck if pushed in and then slid to a direction if that makes sense. It's only happened twice and when it does if I just push the button in and let go it normally stops. If not I push in and slide toward the center and it's good. Pretty sure I just got something stuck in it and it's in need of cleaning.


Sent from my dos terminal.

Thanks so much I love subohm but yes a little uneasy at times more caution than anything the .12 I didn't build the vape shop helped me but I'm still going to keep an eye on it

Sent from my SM-G928V using Tapatalk

 

[Chaotic_Vapes]

Appreciate that as well. Does Sigelei also have this issue? And to @Villagedavis just make sure you know what your batteries can handle safely. Also try turning the wattage down on your device for your tank. I keep forgetting most people use regulated devices. I'm the exact opposite have almost always been unregulated.

Calls To Action! casaa.org

The snow wolf limited is the only device I use so I couldn't tell you. I have a mech and that's it but it's too unsafe to use due to lack of ventilation holes ect. To be put simply if a battery vented at all you're looking at pipe bomb status since it has 0 venting due to some flaws that make the vents close.

I'd try pulling up a search on its safety features then checking to see if they work by looking up reviews on them.


Sent from my dos terminal.

 

[Chaotic_Vapes]

Thanks so much I love subohm but yes a little uneasy at times more caution than anything the .12 I didn't build the vape shop helped me but I'm still going to keep an eye on it

Sent from my SM-G928V using Tapatalk

The snow wolf is capable of going to 0.05 ohms if you have the batteries to support it. For me the lowest I've gone on it is 0.08. Lately I just hang around .2-.3. No need to go lower since I can just up the wattage.

The "sweet spot" for this mod and batteries I use is about .27. You can find sweet spots and battery limits out at steamengine.org.


Sent from my dos terminal.

 

[iSubOhm]

Satan's anus part cracked me up man. Haha.. But as far as I know the Snow Wolf won't increase your amperage with the two batteries it uses because it's series, not parallel like mine. So super low builds on it is I guess one of those "it can do it, but perhaps you shouldn't test for yourself that it can" type of things.

Calls To Action! casaa.org

 

[Villagedavis]

The snow wolf is capable of going to 0.05 ohms if you have the batteries to support it. For me the lowest I've gone on it is 0.08. Lately I just hang around .2-.3. No need to go lower since I can just up the wattage.

The "sweet spot" for this mod and batteries I use is about .27. You can find sweet spots and battery limits out at steamengine.org.


Sent from my dos terminal.

OK I'll remember that my vape shop built me the duel quad twisted coils and it was all the way down to .12 whats the build you do to get .27 I would like to try

Sent from my SM-G928V using Tapatalk

 

[Chaotic_Vapes]

Also on another note, if you like claptons check out transformer coils. It's a round core wire wrapped with ribbon wire. I'm running a dual setup of them at 100 watts. Love it more than the claptons.

And if you're getting too harsh of hits try adding the clear spacer that comes with the v4 and no drip tip. If I use the drip tip it mutes flavor for me and seems to give much hotter vapor that's harsh to me. If I don't use the spacer then I get lava hot juice shooting my mouth.


Sent from my dos terminal.

 

[Chaotic_Vapes]

OK I'll remember that my vape shop built me the duel quad twisted coils and it was all the way down to .12 whats the build you do to get .27 I would like to try

Sent from my SM-G928V using Tapatalk

I was running dual twisted 28 gauge with 2 strands. I'm pretty sure I had it at 5/6 wraps but if you want to double check just enter the specs in steamengine. Will tell you all the details for the coil. I had quad parallels at .24 and they weren't half bad.


Sent from my dos terminal.

 

[Villagedavis]

I was running dual twisted 28 gauge with 2 strands. I'm pretty sure I had it at 5/6 wraps but if you want to double check just enter the specs in steamengine. Will tell you all the details for the coil. I had quad parallels at .24 and they weren't half bad.


Sent from my dos terminal.

What's parallel mean

Sent from my SM-G928V using Tapatalk

 

[Chaotic_Vapes]

What's parallel mean

Sent from my SM-G928V using Tapatalk

It's like twisted but instead of twisting them you leave them straight next to each other, essentially it's 2 coils in 1 like the twisted.
I prefer twisted over parallels though.


Sent from my dos terminal.

 

[Villagedavis]

It's like twisted but instead of twisting them you leave them straight next to each other, essentially it's 2 coils in 1 like the twisted.
I prefer twisted over parallels though.


Sent from my dos terminal.

You gotta pic u can send I understand better bybseeing lol if not its cool

Sent from my SM-G928V using Tapatalk

 

[Chaotic_Vapes]

You gotta pic u can send I understand better bybseeing lol if not its cool

Sent from my SM-G928V using Tapatalk

Not my picture.


Sent from my dos terminal.

 

[iSubOhm]

Parallel is just taking two strands of wire next to each other (parallel) and wrapping them just like you would a normal coil. Careful not to let them overlap. Twice the surface area with one coil.

Calls To Action! casaa.org

 

[Villagedavis]

What's parallel mean

Sent from my SM-G928V using Tapatalk

Gotta picture of ur twisted??

Sent from my SM-G928V using Tapatalk

 

[iSubOhm]

Of my twisted? I have a helix coil in. Sort of twisted then two wires twisted into that..

But if I'm twisting say two strands of 28g I hold tension and twist until it breaks off on one end.
Calls To Action! casaa.org

 

[Villagedavis]

Of my twisted? I have a helix coil in. Sort of twisted then two wires twisted into that..

But if I'm twisting say two strands of 28g I hold tension and twist until it breaks off on one end.
Calls To Action! casaa.org

No @Chaotic_Vapes

Sent from my SM-G928V using Tapatalk

 

[Villagedavis]

Of my twisted? I have a helix coil in. Sort of twisted then two wires twisted into that..

But if I'm twisting say two strands of 28g I hold tension and twist until it breaks off on one end.
Calls To Action! casaa.org

Gotta question so I got the sense herakles tank and i am using the temp coil on my snow wolf so when I first turn it on its hits perfect but after the first hit its cold hits I guess I would explain it like that I can turn it off and backnon and hits like a champ

Sent from my SM-G928V using Tapatalk