Become a Patron!

want a fully copper parallel box

CashNVape

Gold Contributor
Member For 4 Years
is there a parallel box mod out there in all copper? would like one with a volt meter behind the battery door. was looking at the cherry bomber In copper but I just can't use a series mod and I DON'T WANT To.

This is not a want to buy, more of a thread on where to buy something.

Sent from a phone
 

Diescum88

Gold Contributor
Member For 4 Years
Cherry bomber had a major design flaw anyways lol. Thought it a parallel mod though

Sent from my SAMSUNG-SM-G930A using Tapatalk
 

Rabbit Slayer

Silver Contributor
Member For 3 Years
Member For 2 Years
Member For 1 Year
ECF Refugee
are you actively trying to have a mod catch fire or explode?
 

r055co

VU Donator
Platinum Contributor
Member For 4 Years
is there a parallel box mod out there in all copper? would like one with a volt meter behind the battery door. was looking at the cherry bomber In copper but I just can't use a series mod and I DON'T WANT To.

This is not a want to buy, more of a thread on where to buy something.

Sent from a phone
If you're looking for a Mod with a voltage meter you'll need to look for an unregulated Mod, Mech's don't have meters, chips or wires.

If you're looking for a copper Mech I recommend the Abaddon.

8d12bae1cdbb3c2c5c95104dc9656903.jpg


Sent from my Nexus 6 using Tapatalk
 

f1r3b1rd

https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
If you're looking for a Mod with a voltage meter you'll need to look for an unregulated Mod, Mech's don't have meters, chips or wires.

If you're looking for a copper Mech I recommend the Abaddon.

8d12bae1cdbb3c2c5c95104dc9656903.jpg


Sent from my Nexus 6 using Tapatalk
will a 24 or 25mm atty have over-hang?
 

CashNVape

Gold Contributor
Member For 4 Years
If you're looking for a Mod with a voltage meter you'll need to look for an unregulated Mod, Mech's don't have meters, chips or wires.

If you're looking for a copper Mech I recommend the Abaddon.

8d12bae1cdbb3c2c5c95104dc9656903.jpg


Sent from my Nexus 6 using Tapatalk
clone or authentic?

Sent from a phone
 

Dagoroth

Silver Contributor
Member For 3 Years
what?

Sent from a phone

I think you were being taken literally there. Like EVERYTHING in copper. Which would be absurd. Then again you did say "fully copper"

The copper mechs do look amazing, i want a copper look on a regulated, that would be awesome.
 

CashNVape

Gold Contributor
Member For 4 Years
I think you were being taken literally there. Like EVERYTHING in copper. Which would be absurd. Then again you did say "fully copper"

The copper mechs do look amazing, i want a copper look on a regulated, that would be awesome.
lol I c.
I just ment a copper mech that doesn't have a copper top, and aluminium body etc. a box that has been milled out of billet copper. not cast, not a stainless structure and copper plated. fully copper. obviously the 510 can't be copper due to the structure of copper.

Sent from a phone
 

CashNVape

Gold Contributor
Member For 4 Years
cherry bomber is not something I want now because the etching is stupid, especially when it says: FUCK THE CLONERS
wouldn't want to use something that says the word fuck across it lol
it's a lot like t shirts some people wear that says, fuck you, or a middle finger it is distasteful

Sent from a phone
 

HondaDavidson

Gold Contributor
Member For 4 Years
lol I c.
I just ment a copper mech that doesn't have a copper top, and aluminium body etc. a box that has been milled out of billet copper. not cast, not a stainless structure and copper plated. fully copper. obviously the 510 can't be copper due to the structure of copper.

Sent from a phone

Actually there are ALL copper mods out there. There are plenty of all copper 510 connections. There have even been a few all copper atomizers. You are also right copper is a poor choice for some of the components of a mod. if only due to the extreme high wear and maintenance requirements of copper.

Don't know if they still have them but there used to be some Beast Boxes in copper.
I always liked the Cherry Bomber mod, also hated the graphics. Thought about getting a copper brass or Stainless version and grinding the art off..... went regulated instead also did want to ruin the mod. Still have yet to figure out the supposed design flaw they are reported to have.. All the issues I can find with the CB are USER error issues. The only design flaw I could find was they are MECHANICAL rather than unregulated and protected. This assumes one considers a mechanical mod dangerous to start with.
 

r055co

VU Donator
Platinum Contributor
Member For 4 Years
will a 24 or 25mm atty have over-hang?

A little bit with 24mm (not bad though), it's an older design before 24 and 25mm's hit.

clone or authentic?

Sent from a phone

Sadly I can't find an Authentic so it's a Clone, got it from 3FVape. Not a bad Clone and I actually use it rather often, been pretty happy with it.

lol I c.
I just ment a copper mech that doesn't have a copper top, and aluminium body etc. a box that has been milled out of billet copper. not cast, not a stainless structure and copper plated. fully copper. obviously the 510 can't be copper due to the structure of copper.

Sent from a phone

Here's a couple of very nice Mech's I've been keeping my eye on. I'm coming damn close on picking them up.

92% pure copper internals (better than copper for conductivity), I damn near got it this weekend, actually got another Nookie V3 instead. I really, really love the Nookie V3 so I got another for my FDA Apocolypse Stash.

Anyway I'm really coming close to pulling the trigger on this one, very close.

http://dragonsdenvapor.com/CURIMAO-by-SILVIS-WORKS-PHILIPPINES-w-PURE-SILVER-CONTACTS-CUR.htm

Here's another excellent Parallel Mod, all copper internals incased in Delrin

http://dragonsdenvapor.com/Hollowpoint-by-Silver-Wolf-Customs-hollow.htm
 

CashNVape

Gold Contributor
Member For 4 Years
A little bit with 24mm (not bad though), it's an older design before 24 and 25mm's hit.



Sadly I can't find an Authentic so it's a Clone, got it from 3FVape. Not a bad Clone and I actually use it rather often, been pretty happy with it.



Here's a couple of very nice Mech's I've been keeping my eye on. I'm coming damn close on picking them up.

92% pure copper internals (better than copper for conductivity), I damn near got it this weekend, actually got another Nookie V3 instead. I really, really love the Nookie V3 so I got another for my FDA Apocolypse Stash.

Anyway I'm really coming close to pulling the trigger on this one, very close.

http://dragonsdenvapor.com/CURIMAO-by-SILVIS-WORKS-PHILIPPINES-w-PURE-SILVER-CONTACTS-CUR.htm

Here's another excellent Parallel Mod, all copper internals incased in Delrin

http://dragonsdenvapor.com/Hollowpoint-by-Silver-Wolf-Customs-hollow.htm
the hollow point is a bad ass mod dude but that's way past my spending range

Sent from a phone
 

CashNVape

Gold Contributor
Member For 4 Years

r055co

VU Donator
Platinum Contributor
Member For 4 Years
shit that's more then a high end car payment. what a joke! that mod should be built with platinum "precious metal"

Sent from a phone
92.5% Pure Silver encased in Delrin, not brass, SS, Copper, etc. but it's over 250 grams all pure Silver encased in Delrin. Just the Silver alone if you buy a bar of silver the market price is about $149 alone.

Edit: Correction 8.9 ounces of Silver, that is $159 for the raw Silver alone at today's market price
 
Last edited:

fartbubble

Silver Contributor
Member For 3 Years
Member For 2 Years
Next mod I'll probably pick up is the new version of the Adventador that's coming out in a few weeks.
 

f1r3b1rd

https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
shit that's more then a high end car payment. what a joke! that mod should be built with platinum "precious metal"

Sent from a phone
well worth it in my opinion for a good perfoming piece of mech gear/
I used to laugh at the cost of good, authentic, high end mechanical mods. Then I was given an authentic copper tube with nice big copper contacts as a gift.
taking the material cost and artwork in some into account, combined with longevity, I can understand the cost.
That said, I have a handful of single mech tubes, and few parallel mosfet boxes, eventually i'll get just one nice show off box like that.
 

CashNVape

Gold Contributor
Member For 4 Years
well worth it in my opinion for a good perfoming piece of mech gear/
I used to laugh at the cost of good, authentic, high end mechanical mods. Then I was given an authentic copper tube with nice big copper contacts as a gift.
taking the material cost and artwork in some into account, combined with longevity, I can understand the cost.
That said, I have a handful of single mech tubes, and few parallel mosfet boxes, eventually i'll get just one nice show off box like that.
what's a good "authentic" copper mod that is between $20-75?

Sent from a phone
 

f1r3b1rd

https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
what's a good "authentic" copper mod that is between $20-75?

Sent from a phone
that's one of those things you just have to keep your eyes opened for.

I was able to get a copper overdose for 40$ when hyperion vape was going out of business.
and a copper flagship for 45 from vaporbeast when they were clearing them out.

none that I have seen are that inexpensive normally other than maybe the phantom from wotofo

edit
I don't know anything about it.. but theres this
https://www.vaporrange.com/asMODus-Klone-V2-0-18650-22mm-Mechanical-Mod-p/klone2.0.htm
beyond vape makes good shit
http://www.beyondvape.com/store/slightly-blemished-c-219_140_142/?pg=categories

and
http://www.beyondvape.com/store/slightly-blemished-c-219_140_142/?pg=categories
http://jkvapes.com/hardware/mechanical-mods/tahitinian-v2-by-tribe-concept
http://jkvapes.com/hardware/mechanical-mods/longhorn-mod-by-jk-vapes-gp-custom
http://www.vaporkings.com/AUTHENTIC-King-Mod-p/kingmod.htm
copper limitless
http://www.kidneypuncher.com/limitless-mod-body/
http://www.thevapeunit.com/collections/mechanical/products/copper-mod
https://www.bevapehappy.com/collect...ag-bumblebee-mod-by-extreme-blast-philippines
https://advancedvapors.com/collecti...cts/authentic-havok-copper-mod-by-havok-vapes

100$
https://www.bevapehappy.com/collections/mods/products/mayhem-mod-by-chaos
its not copper but its damn good mech tube for 20$
https://advancedvapors.com/collecti...cts/authentic-havok-copper-mod-by-havok-vapes

ok, so some may be brass, but all are known to be good authentic.
if you can find a "ragnorak" in copper pick it up, they are usually around 60-75$ on ebay and are full copper tubes and hard hitters.
also the copper flagship is another one that can be found for under a hundred if you look- it has a the smoothest button ive ever used. vaporkings has the aluminum for 69$
the other good one that comes to mind in the under a hundred category would be the prax1s, the infected by usamademods and anything from ariabuilt/beyond vape.
 

fartbubble

Silver Contributor
Member For 3 Years
Member For 2 Years
Yeah, forgot he was looking for one with a 510. But for that kind of price range, can't think of any good authentics with one
 

f1r3b1rd

https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
Yeah, forgot he was looking for one with a 510. But for that kind of price range, can't think of any good authentics with one
I have a few in my list that are just a tad higher.... that ragnorak is the best bet if one can be found.
or a Science of Vaping copper shift mod
 

CashNVape

Gold Contributor
Member For 4 Years
I have a few in my list that are just a tad higher.... that ragnorak is the best bet if one can be found.
or a Science of Vaping copper shift mod
I said it has to have a 510?
I don't recall saying that.

Sent from a phone
 

f1r3b1rd

https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
I said it has to have a 510?
I don't recall saying that.

Sent from a phone
I was just trying to verify if it did or did not for my own curiosity.

sorry dude
damn
 

r055co

VU Donator
Platinum Contributor
Member For 4 Years
that's a nice tube; but, isn't that a hybrid?
I pimp it out a lot, my favorite tube mod is the Oros V2 from Beyond Vape. It's awesome, hits great, excellent build quality and the button is perfect.

Sent from my Nexus 6 using Tapatalk
 

r055co

VU Donator
Platinum Contributor
Member For 4 Years
sadly they are sold out! I was going to pick one up as that website is us based I think and legit

Sent from a phone
They should get more, if not shop around for a bit.

Oh and 3Fvape is China ;)

Sent from my Nexus 6 using Tapatalk
 

f1r3b1rd

https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
I pimp it out a lot, my favorite tube mod is the Oros V2 from Beyond Vape. It's awesome, hits great, excellent build quality and the button is perfect.

Sent from my Nexus 6 using Tapatalk
I loved my oros, I made a deal some time back for an authentic stingray xti; my oros became part of that deal.
sucks in a way, since I wont use the stingray much, at least not when out.

I keep looking at that sage v2 in that blem list though. For 35 bucks its a no brainer. 4
i have a few hybrids though: 4-nine, prax1s and Stingrayxti...
 

CashNVape

Gold Contributor
Member For 4 Years
I pimp it out a lot, my favorite tube mod is the Oros V2 from Beyond Vape. It's awesome, hits great, excellent build quality and the button is perfect.

Sent from my Nexus 6 using Tapatalk
yup I want that!! I saw the smaller 18350 version and almost bought it but now that I see there is a 18650 version, I need it. where to find one cheap?

Sent from a phone
 

r055co

VU Donator
Platinum Contributor
Member For 4 Years
yup I want that!! I saw the smaller 18350 version and almost bought it but now that I see there is a 18650 version, I need it. where to find one cheap?

Sent from a phone
I picked up mine on Sale, 1st one for $40 slightly blemished and 2nd on Sale for $60.

Last week I popped in the local one, haggled a bit and got their last two 18350's for $65. It's an outstanding stealth Vape. I've been running a Narda with a 0.5 SS fused Clapton, wonderful!

Look around a bit, I'm not sure if they're producing them anymore. I'm hoping the reason is that they're coming out with a V3. It really is a wonderful tube, I actually like it better than my Kennedy Roundhouse.

Sent from my Nexus 6 using Tapatalk
 

CashNVape

Gold Contributor
Member For 4 Years
I picked up mine on Sale, 1st one for $40 slightly blemished and 2nd on Sale for $60.

Last week I popped in the local one, haggled a bit and got their last two 18350's for $65. It's an outstanding stealth Vape. I've been running a Narda with a 0.5 SS fused Clapton, wonderful!

Look around a bit, I'm not sure if they're producing them anymore. I'm hoping the reason is that they're coming out with a V3. It really is a wonderful tube, I actually like it better than my Kennedy Roundhouse.

Sent from my Nexus 6 using Tapatalk
fully copper right?

Sent from a phone
 

r055co

VU Donator
Platinum Contributor
Member For 4 Years
I loved my oros, I made a deal some time back for an authentic stingray xti; my oros became part of that deal.
sucks in a way, since I wont use the stingray much, at least not when out.

I keep looking at that sage v2 in that blem list though. For 35 bucks its a no brainer. 4
i have a few hybrids though: 4-nine, prax1s and Stingrayxti...
Yeah the Sage isn't bad, I have the Brass one. I just don't like the split tube. Switch is awesome like all their house brands.
fully copper right?

Sent from a phone
Yep

Sent from my Nexus 6 using Tapatalk
 

CashNVape

Gold Contributor
Member For 4 Years
bought box, not fully copper but supposed to be a top notch American made box! stay tuned....

PS. Next on my list is that Aria Oros v2 mech! can't find any for sale anywhere.

Sent from a phone
 

r055co

VU Donator
Platinum Contributor
Member For 4 Years
bought box, not fully copper but supposed to be a top notch American made box! stay tuned....

PS. Next on my list is that Aria Oros v2 mech! can't find any for sale anywhere.

Sent from a phone
What one?

Sent from my Nexus 6 using Tapatalk
 

VU Sponsors

Top