1. THE VAPORJOES NETWORK IS GIVING AWAY A PLAYSTATION 4 PRO
    CLICK HERE FOR INFO

Wire recommendations for 0.2 ohm single coil

Discussion in 'New Builders Corner' started by twalker2k, Nov 12, 2017.

  1. twalker2k

    twalker2k New Member

    Blog Posts:
    0
    Joined:
    Dec 12, 2015
    Messages:
    3
    This is my first post, so I apologize if there is a more appropriate forum for this question.

    I'm a flavor chaser and have recently started using mechanical mods. I find 0.2 ohms to be a good resistance for the vape I enjoy. I'm struggling to find the best wire for a 0.18-0.22 ohm single coil build. I prefer 6-8 wrap fused claptons with 3mm ID. I get great flavor from SS316L and N80. All the wire I've purchased seem to come out above 0.20 ohms for a single coil. For example, I have some 36 SS / 26 SS Fused 2 Core wire that builds out to about 0.27 ohms.

    I'd appreciate a recommendation for a clapton wire that'd build out to a 0.2 ohm coil.
     
  2. r055co

    r055co VU Donator Gold Contributor Member For 1 Year

    Blog Posts:
    0
    Joined:
    Jan 24, 2016
    Messages:
    4,421
  3. twalker2k

    twalker2k New Member

    Blog Posts:
    0
    Joined:
    Dec 12, 2015
    Messages:
    3
    Thanks r055co. Steam engine is great, but a bit cumbersome to configure for exotic wires. It'd be super useful if wire vendors provided links to steam engine with their wire(s) configured. It appears steam engine supports query string parameters to construct a URL for a specific wire type. e.g. 316L wire with 3mm ID.
     
  4. Fudgey Finger

    Fudgey Finger New Member

    Blog Posts:
    0
    Joined:
    Sep 28, 2017
    Messages:
    96
    Ok I just played around in steam engine for you and found a good coil for what you are targeting. 8 wrap 3mm Triple core fused Clapton with one 26g core and 2x28g n80 wrapped with 38g ss316. Dual coil it should ohm out at 0.218

    Depending on your build deck the resistance may change slightly though so make sure you always use an ohm meter to check your build if you are using mech. This part is vital and must not be skipped if you want to keep your face.

    If you can't find a coil like this send me a pm and I can build you a pair.

    Sent from my LGL64VL using Tapatalk
     
  5. CactusFanaticus

    CactusFanaticus Bronze Contributor

    Blog Posts:
    0
    Joined:
    May 28, 2017
    Messages:
    362
    Stainless steel. One of my favorite single coils atm is 3mm 6 wraps SS317L 26x2/38 staged fused clapton, staged with one piece of 26 @ .18-.2.

    Super fast ramp from the staging, flavor and clouds from claptons.
    [​IMG]
     
  6. gbalkam

    gbalkam Silver Contributor Member For 1 Year ECF Refugee

    Blog Posts:
    0
    Joined:
    Jun 10, 2016
    Messages:
    1,084
  7. Fudgey Finger

    Fudgey Finger New Member

    Blog Posts:
    0
    Joined:
    Sep 28, 2017
    Messages:
    96
    Disregard the build I posted. I didn't notice that you said you needed a single coil to ohm at .2

    Sent from my LGL64VL using Tapatalk
     
  8. twalker2k

    twalker2k New Member

    Blog Posts:
    0
    Joined:
    Dec 12, 2015
    Messages:
    3
    Splendid. Thank you for all the suggestions and the link.

    That sounds ideal.
     

Share This Page

Close This Message