Become a Patron!

WOTOFO PROFILE UNITY RTA, NEW REBUILDABLE MESH TANK

WotofoOfficial

VU Vendor
VU Vendor
Bronze Contributor
Member For 3 Years
VU Challenge Sponsor
Hey VU guys,

You shall have hearning or using our Profile RDA, let we introduce our mesh RTA this time.

Profile Unity RTA! :cool:


What innovations did we make this time?

1. Deck-chamber linkage system
The deck follows the chamber always, which makes the deck always follow the chamber when turning the atomizer.
Why the following? Because we found that when a person screws the vaporization chamber onto the deck, he/she might have different feel of tightness, so finally they have different air directions to the mesh. We don’t want any little negative impact in your flavor feast, so it’s best to kill such little possibilities in the beginning, and make the deck and the chamber linked at the best position throughout. With this solution, flavor experience for each individual person becomes much closer to what we designed.
d44nsdU.gif

ybkX0h5.gif



2. It’s The Enemy Of Burnt Taste.

Burnt taste happens mostly when the liquid is poorly got past to the coil.
But look how’s the liquid flow system on the Profile Unity RTA work. It starts from the two long refill slots which are no difference than most top filling tanks on the market. Then the e-liquid, through two smaller-sized slots, gets into the interspace between the vaporization chamber wall and the atomizer wall. That’s where juice gets distributed. Juice will be directed right to the wick on its side top, as well as bottom, thus speeds up the feeding process with non-stop flow by the shortest path.

w1MlVLU.gif



We also make few small changes.
1. Profile Unity RTA's drip tip is still made of resin kept the 810 connection standard,. It is nearly 2 times thicker than our previous drip tip, but the center passage is smaller and has a gradual reduction in diameter downwards. The thickness is for consideration of heat dissipation and comfort, allowing the drip tip to snugly fit between your lips, while the center passage design facilitates flavor delivery.

ljp4DD7.png


2. Equipped with OFRF nexMESH coil. Last year, a brand called OFRF launched their mesh product that can flawlessly fit in our Profile RDA build deck. As the Profile mesh RTA project was settled, we met with the OFRF team and reached the agreement to incorporate their nexMESH into our new product. The nexMESH is also made from Kanthal A1 with resistance of 0.13ohm (performs best at 60 to 70W), adopting triple dense weaving tech to have more contact area with e-liquid.
Oc7rxOX.png



As the slogan said "Phenomenal Flavor Production, All Tastes Locked In!"
b2MEnnw.png




Welcome to share your thoughts or question about Profile Unity RTA here guys.
We may reply a little later considering of different time zone, but we‘re always here. :bliss:

Olsu5Ai.png
 
Last edited:

jwill

The Great King of Nothing
VU Donator
Platinum Contributor
Member For 2 Years
VU Challenge Team
Reddit Exile
VU SWAT
This actually looks really cool. I want one.
 

WotofoOfficial

VU Vendor
VU Vendor
Bronze Contributor
Member For 3 Years
VU Challenge Sponsor
This actually looks really cool. I want one.
Thx!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!Fam!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 

WotofoOfficial

VU Vendor
VU Vendor
Bronze Contributor
Member For 3 Years
VU Challenge Sponsor
This actually looks really cool. I want one.
Thx!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!Fam!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 

f1r3b1rd

https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
Looks awesome!
 

BobsHere

From Wherever
VU Donator
Gold Contributor
Member For 5 Years
@WotofoOfficial
How about some SS316l mesh ?
Competition makes some that could be better:
1 Fit without cutting and have solid strip for clamp.
2 Thicker.
 
Last edited:

Letitia9

Citrus Junkie
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
I'd think a 7ml wouldn’t be unreasonable for a mesh coil. Curious how everyone will like it.
 

Letitia9

Citrus Junkie
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Personally I think an rdta would have been a better direction to take. Hopefully this rta will prove me wrong. Wotofo does produce some great attys.
 

Garemlin

Gold Contributor
Member For 4 Years
ECF Refugee
I'll be more interested in mesh when they come out with a little higher resistance. I love the idea of this and the profile rda. I just don't vape that low.


Tap'd from my iPhone XR
 

BobsHere

From Wherever
VU Donator
Gold Contributor
Member For 5 Years
So I guess any SS mesh that was thicker would ohm too low, guess I don't have to guess, guess I know that....or should have known. Guess that makes me liable...
 

VU Sponsors

Top