Discussion in 'Mods & PVs' started by timwis, Sep 13, 2018.

  1. timwis

    timwis Gold Contributor Member For 1 Year

    Blog Posts:
    Apr 9, 2017
    Hi Vaping Underground members, In this review i take a look at the RECURVE SQUONK 80W BOX MOD from WOTOFO. The WOTOFO RECURVE SQUONK 80W BOX MOD was supplied for the purpose of this review by Pearl from Cigabuy.




    The Recurve Squonk Mod is a collaboration between Mike Vapes and Wotofo, but what does it bring to the table. It will run off a single 18650, 20650, 20700 or 21700 battery and two adaptors are included to make this possible. It also boasts a great feel and super ergonomics with rubberised finish and pistol grip shape with trigger like fire button. The device is designed to give mechanical style performance being direct output but comes with a chip with all the safety feature's we would get from a regulated device as well as reducing voltage if needed to not allow the device to fire over 80w so lower ohm builds will not put too much stress on the battery. So it's ergonomic, versatile, for the most part takes full voltage from the battery (direct output) but with safety at the forefront and finally well worth a look.

    In the Box



    1 x Recurve Squonk Mod
    1 x USB Charging Cable
    2 x Battery Adaptors
    1 x User Manual


    Aesthetics and Ergonomics

    The Recurve comes in the usual Wotofo Green cardboard packaging with viewing window, and the first thing i noticed was it's the size of a large dual battery device, you do need to allow for the bottle but even so it's the largest single battery squonk device i have used. On picking the device up mimicking using it i also noticed it was heavy but both the size and weight doesn't effect it's super ergonomics due to it's curvy shape that makes it very comfortable in the hand and my fingers were in natural positions for both firing and pressing the bottle. The device has a Black bottle cradle panel and a black curved battery panel which is the spine of the device, the top of the device is also Black, the rest of the device is in the colour of choice. I received the Black version, it's also available in Blue, Gunmetal, Red and White, all colours suit the black sections on the device. The front of the device has a large oval fire button that curves inwards to follow the curved contour of the device, at the bottom of the front we have a large cutout to allow the bottle to be pressed. The base of the device has plenty of branding and safety stamps, the curvy spine which is the battery panel is featureless, on one side of the device near the top we have the micro USB port. The top of the device houses a stainless Steel 510 plate with Gold plated, spring loaded BF 510 to one side, the other side tapers down and has the "RECURVE" logo printed. The build quality of the device is excellent and has a rubberised finish that feels very nice to the touch.


    Recurve Specs and Features:

    Dimensions: 60.5mm x 27.0mm x 90.0mm
    Material: Zinc Alloy + Special Rubber Coating
    Battery Type: Single – 18650, 20650, 20700, 21700 (Battery Not Included)
    Output Voltage: 3.2 – 4.2V
    Squonk Bottle Capacity: 8mL
    Max Charging Current: 2A
    Resistance Range: 0.08 – 3.0 ohms
    Comes With 2 Battery Adapters
    Comes With USB Charging Cable
    Colours Available: Black, Blue, Gunmetal, Red, White


    Fitting the Battery

    The Battery panel is the curved spine of the device that is secured in place with 2 magnets at the top one to each side and a large magnet at the bottom. Once the panel is off i was really pleased to see clear battery orientation marked in White. The device will fit a 20700 or 21700 battery without an adaptor but a 21700 is a tight fit which is something people need to be aware of. 2 adaptors are supplied one allows the fitting of a 18650, the other a 20650 so pretty much all the batteries you have for existing devices will fit.

    [​IMG] [​IMG]

    The Squonk Bottle

    On the bottom of the front of the device we have a removable cradle with large cutout for pressing the bottle like has become quite common on squonk devices. To remove simply pull down and outwards, it is secured via 2 magnets one either side. The 8ml squonk bottle pulls away from the device with ease, it's the type of bottle with the tube feed attached to the lid of the bottle with a small piece of tubing protruding out the lid to fasten on the pipe in the device. This is the simplest and easiest way for a squonk bottle to be fitted but sometimes when this method is used the pipe in the device is very short making it a little fiddly to fit the tube on. The pipe inside the Recurve is just a few mm longer which makes all the difference and the bottle fits into place with incredible ease. To fill the bottle simply unscrew the lid and pull the tubing (which is attached to the lid) out of the bottle, fill, and then lower the tubing back inside the bottle and screw the lid back on. The bottle is tinted Grey but is very translucent so you can clearly see the level of your juice. On the device behind where the bottle is fitted is a translucent strip which allows an LED to shine through, when the bottle is fitted the bottle it'self lights up. For those that don't like LED's the LED is only white and only lights up when a safety protection is activated or when the device is first turned on and off.

    [​IMG] [​IMG] [​IMG]

    Review Continued Below:
  2. timwis

    timwis Gold Contributor Member For 1 Year

    Blog Posts:
    Apr 9, 2017
    Review Continued:

    Using the Recurve

    The device is the usual 5 clicks to turn the device on and 5 clicks to turn off, when the device is turned on or off the squonk bottle lights up for a couple of seconds. There is a translucent strip on the device behind the bottle which allows the light from an LED to shine through. The device is a Direct output device taking the full voltage from the battery straight to the atomizer so you can't adjust the wattage and there is no screen. Although the device gives power straight from the battery as you would get with a mechanical device the Recurve has a chip that intervenes when necessary to keep the device very safe. As well as not allowing the device to output more than 80W it has other safety protections which are short circuit protection ( the bottle flashes 5 times and won't fire), low voltage protection (the bottle flashes 10 times and won't fire) to use again the battery needs recharging. Other protections are auto cutoff protection (the device will cut firing after 10 second continuous vape), Overheating protection (the bottle will light up and stay lit until the device is cooled to a safe level, while lit the device won't fire), Charging indication (while charging the bottle will be lit continuously until fully charged, the light will then go out). The final protections are reverse battery protection and over charging & over discharging protection. When i refer to the squonk bottle flashes etc obviously it's actually the translucent strip behind but the bottle lighting up is what can be seen.

    [​IMG] [​IMG]

    My Experience Using the Recurve

    This device is all about the ergonomics, it feels so comfortable in the hand and the curved fire button feels superb, it's not just the feel of the curved button but its also clicky and very responsive, as you would expect the device fires instantly. Also my fingers are naturally in position to press the bottle and the curved spine follow the contours of the palm of the hand, this is as good as ergonomics get for a squonk device. Being direct output the vape does weaken as the battery lowers in voltage, but it's gradual and the Recurve gave a good vape throughout. I also love having the choice of batteries, it's the first device i have looked at where 4 different battery types can be used. The squonk bottle is just the right tension in my opinion, despite not being proprietary i still think a spare bottle should of been included. It's not a deal breaker because of all the pros for this device but i like to see devices with no screen having good battery status indication, in my opinion it should be a minimum of 3 stages, preferably 4 or 5 so you have a very good idea how much life is left in the battery, the Recurve has none which is a big con. Tanks up to 26mm look good on the device and battery life will depend on which battery option you choose, if your only option is charging your battery inside the device it supports 2A charging.

    [​IMG] [​IMG]


    Very nice build quality
    No rattles whatsoever
    Very ergonomic
    Aesthetically pleasing shape (curvy)
    Very nice feeling rubberised finish
    Squonk bottle perfect position for pressing
    Curved, large, clicky fire button
    Fires instantly
    Up to 26mm atty's look good
    Comes in 5 colours
    coloured Accents (apart from obviously the Black version)
    Squonk bottle fits perfectly and with ease
    Squonk bottle perfect tension (in my opinion)
    8ml capacity
    18650, 20650, 20700 or 21700 battery
    2A charging
    Safety protections


    No battery status indication
    Very heavy for single battery device
    21700 battery, a very tight fit
    Direct output (power will weaken as voltage drops)
    No spare squonk bottle


    I would once again like to thank Pearl from Cigabuy for supplying the Wotofo Recurve Squonk 80W Box Mod for the purpose of this review.

    Last edited: Sep 14, 2018
    Smiley_ and CrazyChef v2.0 like this.
  3. WotofoOfficial

    WotofoOfficial VU Vendor VU Vendor Bronze Contributor Member For 1 Year VU Challenge Sponsor

    Blog Posts:
    Dec 5, 2017
    Thanks for your great review timwis:cheers:
  4. Smiley_

    Smiley_ New Member

    Blog Posts:
    Sep 20, 2018
    Thanks for the review. Interesting squonk mod.
    WotofoOfficial likes this.

Share This Page

Close This Message