Well i bought a kayfun V4 instead. Love my kayfuns!!
Sent from my SAMSUNG-SGH-I537
I bought won to have shipped with the Cloupor T8 I won from Cigabuy. Figured for $16 with free shipping, it was worth taking a shot.
Been frustrated as hell with the thing. Been leaking most times I fill it and prompts a "check atomizer" message probably 30% of the time.
Took it completely apart and been diagnosing the problem for a while today and here are the tips I have for you:
The positive pin holds the base and the liquid control ring together. If you liquid control ring is even a little tight, loosen the positive pin some.
The deck telescopes out from the base into a sort of rounded square area. Make sure it moves easily into and out of the base. If it doesn't try another o-ring and if that isn't any better, then take the base and the deck and sit down and peruse VU for a bit while you push the deck into and out of the base until the o-ring is broken in/down a bit.
Note that it is important for the liquid ring to move smoothly and with minimal effort so that you can tell that the liquid is actually cut off because it is a simple bit of plate pressing on plate to cut it off so even a small miss makes a mess and you have to do a lot of cleaning because of the way the air flow is designed it floods a surprisingly large air chamber under the deck that the positive "pin" goes through. The positive current is actually transferred through a small spring
I've just learned all of this today and haven't put it all together again yet because I'm a bit sick of it at the moment and think I'd rather leave it in pieces for a bit than risk the chance of failure...
