Become a Patron!

Alternate Universe

adk1989

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
I don't know if im allowed to do this or not, but I just found a juice company that I will be frequenting from now on called Clouds of hope. Each just has its own charity that ten percent of the proceeds go to research. Just thought I would pass that along
 

adk1989

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Yes you can do that...LOL


lol good I didn't know if it was allowed to pimp a juice company lol

I am not affiliated with them in anyway, I just think it is a great this for a company to give back like that. Its actually a line made by space jam so it should be pretty damn good!
 

adk1989

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
lol, good. there shop link seems to be broken so therefore im going to have to wait until that is fixed before I can order
 

moecat

Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Just about time to motor ...
Driving.gif
 

kelli

Vapid Vapetress
Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years

kelli

Vapid Vapetress
Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years

Byter

Silver Contributor
Member For 4 Years
Well, I discovered I have a dead tree next to the front walkway. Maybe I post a picture.
 

kelli

Vapid Vapetress
Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Well, I discovered I have a dead tree next to the front walkway. Maybe I post a picture.

good idea...will go with the decor.
 

glassgrl

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
@Byter, could I get the cliff note version of the problem with the insulator? I have a subtank mini here that I haven't had a chance to open yet.
 

Byter

Silver Contributor
Member For 4 Years
@Byter, could I get the cliff note version of the problem with the insulator? I have a subtank mini here that I haven't had a chance to open yet.

Sure. The early mini's came with a silicon gel insulator. I think they were white. And general consensus was that they added monkey ass flavor to the vape. They couldn't handle the heat. Also, tank cracker liquids messed them up. So Kanger changed design and uses peek insulators now that can withstand 500 degree direct contact. They are tan from what I have read. Much better vape. Kanger is offering free peek replacement insulators through their dealers to those stuck with the old insulators. This only applies to RBA attachment.
 

glassgrl

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Sure. The early mini's came with a silicon gel insulator. I think they were white. And general consensus was that they added monkey ass flavor to the vape. They couldn't handle the heat. Also, tank cracker liquids messed them up. So Kanger changed design and uses peek insulators now that can withstand 500 degree direct contact. Much better vape. Kanger is offering free peek replacement insulators through their dealers to those stuck with the old insulators. This only applies to RBA attachment.
OK so I can get one then. That's good. I just need to remember where...lol. Just opened it up and it's the old one. Thank you. :)
 

muth

Gold Contributor
Member For 5 Years
Sure. The early mini's came with a silicon gel insulator. I think they were white. And general consensus was that they added monkey ass flavor to the vape. They couldn't handle the heat. Also, tank cracker liquids messed them up. So Kanger changed design and uses peek insulators now that can withstand 500 degree direct contact. They are tan from what I have read. Much better vape. Kanger is offering free peek replacement insulators through their dealers to those stuck with the old insulators. This only applies to RBA attachment.
NOOOOOOO!!!! They are completely clear, virtually invisible! Please view pBusardo's comparison review. Where are you getting this tan information?
 

glassgrl

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
What does the old one look like muth? Is it...kinda clear white-ish? I don't know what I have now.
 

muth

Gold Contributor
Member For 5 Years
@Byter where are you getting your info on the peek insulators? I have experience with both. Peek is clear, monkey ass is white!
 

muth

Gold Contributor
Member For 5 Years
What does the old one look like muth? Is it...kinda clear white-ish? I don't know what I have now.
Old one is milky white (I guess you could call it). But the new peek, there is no mistaken, is clear and practically invisible!
 

glassgrl

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
I found the pBusardo video. An hour long...brb. lol
 

muth

Gold Contributor
Member For 5 Years
I don't want you guys to get ripped off. I have tasted monkey ass! It is the white insulator.
 

muth

Gold Contributor
Member For 5 Years
I found the pBusardo video. An hour long...brb. lol
I know, they're all like that:(Someone else must have one out there. But I had a great phone conversation with Vapor Beast when I bought my new, good one from them. Want their number?
 

muth

Gold Contributor
Member For 5 Years
I've learned my lesson. It's not worth trying to save a couple of bucks for all the aggravation you might have to put up with.
 

muth

Gold Contributor
Member For 5 Years
Sure. The early mini's came with a silicon gel insulator. I think they were white. And general consensus was that they added monkey ass flavor to the vape. They couldn't handle the heat. Also, tank cracker liquids messed them up. So Kanger changed design and uses peek insulators now that can withstand 500 degree direct contact. They are tan from what I have read. Much better vape. Kanger is offering free peek replacement insulators through their dealers to those stuck with the old insulators. This only applies to RBA attachment.
Please see a reputable reviewer
 

glassgrl

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
I know, they're all like that:(Someone else must have one out there. But I had a great phone conversation with Vapor Beast when I bought my new, good one from them. Want their number?
Thanks muth. I think I have it (#). That's where I got it from, I'll see if they have any left tomorrow. If I need it anyway...20 minutes into this video and he's just started talking about the mini. Nano was first. Byter, I'll update when (and if) I get to the part of peek vs. monkeyass.
 

Byter

Silver Contributor
Member For 4 Years
NOOOOOOO!!!! They are completely clear, virtually invisible! Please view pBusardo's comparison review. Where are you getting this tan information?

@muth @glassgrl The first version of Kanger PEEK was clear. The current version is tan. The tan adds I think 30% glass to make the PEEK even more heat resistant, giving it a tan appearance. I have clear on the full size subtank it works too.

Note from Kanger
http://www.tasteyourjuice.com/wordpress/2015/01/28/kanger-subtank-insulator-clarification/

Images from Google
https://www.google.com/search?q=kanger peek insulator&espv=2&biw=1346&bih=1212&tbm=isch&tbo=u&source=univ&sa=X&ei=8hH5VJKeDom1oQTKqoLwCQ&ved=0CCwQsAQ&dpr=1
 
Last edited:

VU Sponsors

Top