Authentic Ambition Mods Luxem MOSFET Semi-Mechanical Tube 18350/18650 Mod 23mm
Features
Short Circuit Protection;
Polarity Protection;
12seconds timeout;
Switch 3 clicks on /off;
Sleep mode on in 2 second without using;
0.25 ohm: Overvoltage Protection and Minimum resistance 0.25 ohm;
Constant Voltage 3.5V,low tension protection 3.3V.
$20.99 ULTON Tripod Style 316SS 22mm RTA Rebuildable Tank Atomizer 2ml (1:1) - Silver
Features
510 threading;
316ss material;
2ml capacity;
Single coil build deck;
The Deck
The deck of the Tripod is targeted for single coil setups with design details aiming to facilitate and improve rebuilding process as much as possible. Focusing on some of them, you can see high precision large pan head phillips post screws, conveniently placed rails to capture wire either between rail and screw head / body or around screw body (depending on wire D), cut – outs on outer deck rim for easier rebuilding, cut – outs on inner deck rim plus cotton wells to help proper cotton placement and juice distribution along cotton body, sufficient liquid intake slots on deck sides ( approx. 4.0mm x 2.0mm). The Tripod deck can literally host any size of single coil build, from classic small sized ones up to larger exotic coils.
The Air Flow
You may tune air flow via four pin options, each one with air hole D=1.0mm/1.2mm/ 1.5mm/1.8mm pinned inside a D=4.0mm nest. You may also regulate more “airy” flow via the AFCS Ring, adjusting from zero to D=4.0mm.
The Drip Tip
Another interesting point is the custom drip tip that comes with the device. This is a two-parts assembly as well, with its two parts sandwiching the Top Cap to ensure extra stability when removing top cap to refill. The drip tip is easily removable to let you use your own 510 drip tip.
Optimised Ergonomics
A thread-less mechanism with twist and pull / push actions in order to design and manufacture high precision parts that make vaping with an RTA so much easier. Instant access to deck can’t get any simpler and quicker. You just twist, align the small triangles that are located on the sides of chimney and deck and then pull in order to access to your deck super quickly, any time, even with a full tank. Same with refilling, as good old screw on threaded cap is no longer here. Simply align triangle on side of the top cap with the dot on the rim right below and pull up to refill through the large liquid slots. Don’t need to worry if you find it hard to spot dots and triangles: If you twist and pull gently you will definitely get it when you reach to the aligned – unlocking point of each mechanism.
$13.9 M4H1 Style 18650/20700 Mechanical Mod
Features
Side fire (no spring/magnet);
No lock (Advanced users ONLY!);
Australian Brass Plates;
Fits up to 30mm RDA;
Easy to disassemble / assemble;
18650 battery adaptor
Powered by 1 x 18650 / 21700;
$21.9 YFTK Ataman V3 Style 22mm 316SS RTA Rebuildable Tank Atomizer
Features
510 threading;
316SS material;
Single coil bulid deck;
Adjustable airflow
Features
Short Circuit Protection;
Polarity Protection;
12seconds timeout;
Switch 3 clicks on /off;
Sleep mode on in 2 second without using;
0.25 ohm: Overvoltage Protection and Minimum resistance 0.25 ohm;
Constant Voltage 3.5V,low tension protection 3.3V.
$20.99 ULTON Tripod Style 316SS 22mm RTA Rebuildable Tank Atomizer 2ml (1:1) - Silver
Features
510 threading;
316ss material;
2ml capacity;
Single coil build deck;
The Deck
The deck of the Tripod is targeted for single coil setups with design details aiming to facilitate and improve rebuilding process as much as possible. Focusing on some of them, you can see high precision large pan head phillips post screws, conveniently placed rails to capture wire either between rail and screw head / body or around screw body (depending on wire D), cut – outs on outer deck rim for easier rebuilding, cut – outs on inner deck rim plus cotton wells to help proper cotton placement and juice distribution along cotton body, sufficient liquid intake slots on deck sides ( approx. 4.0mm x 2.0mm). The Tripod deck can literally host any size of single coil build, from classic small sized ones up to larger exotic coils.
The Air Flow
You may tune air flow via four pin options, each one with air hole D=1.0mm/1.2mm/ 1.5mm/1.8mm pinned inside a D=4.0mm nest. You may also regulate more “airy” flow via the AFCS Ring, adjusting from zero to D=4.0mm.
The Drip Tip
Another interesting point is the custom drip tip that comes with the device. This is a two-parts assembly as well, with its two parts sandwiching the Top Cap to ensure extra stability when removing top cap to refill. The drip tip is easily removable to let you use your own 510 drip tip.
Optimised Ergonomics
A thread-less mechanism with twist and pull / push actions in order to design and manufacture high precision parts that make vaping with an RTA so much easier. Instant access to deck can’t get any simpler and quicker. You just twist, align the small triangles that are located on the sides of chimney and deck and then pull in order to access to your deck super quickly, any time, even with a full tank. Same with refilling, as good old screw on threaded cap is no longer here. Simply align triangle on side of the top cap with the dot on the rim right below and pull up to refill through the large liquid slots. Don’t need to worry if you find it hard to spot dots and triangles: If you twist and pull gently you will definitely get it when you reach to the aligned – unlocking point of each mechanism.
$13.9 M4H1 Style 18650/20700 Mechanical Mod
Features
Side fire (no spring/magnet);
No lock (Advanced users ONLY!);
Australian Brass Plates;
Fits up to 30mm RDA;
Easy to disassemble / assemble;
18650 battery adaptor
Powered by 1 x 18650 / 21700;
$21.9 YFTK Ataman V3 Style 22mm 316SS RTA Rebuildable Tank Atomizer
Features
510 threading;
316SS material;
Single coil bulid deck;
Adjustable airflow