Amps

[Boyd]

I have noticed that the batteries come in different amps, and I am assuming like any electronic is isn't good to under amp your device. I can not find in my Smok XCube mini 75W manual anywher where it talks about how many amps the battery needs to be. I am using a Uuwell Crown tank with a 0.5 dual coil. The cheap batteries that I used with my old Kanger set up are getting hot in this device and are not lasting very long. Does anyone know what the minimum amps are?

 

[lordmage]

best safe CDR should be 20- 30 amps for any device. I suggest LG he2 or Sony Vtc 4 5 6. Stick to LG, Samsung, Sony or Panasonic

 

[martin]

0.5 ohm at 75 w needs minimum 12.25 amp best advise dont purchase a cell bellow 20 amp
also im not aware of panasonic having cells above 10 amp lg is my all rounder choice of cell

 

[nightshard]

Depends what wattage you're using it at.
Up to 60W 20A battery, above 25A battery.
20A: 30Q, VTC6, HG2
25A: HD2, HD2C, HD4, VTC5A (can get by with 20R and VTC4)

 

[Slurp812]

I have noticed that the batteries come in different amps, and I am assuming like any electronic is isn't good to under amp your device. I can not find in my Smok XCube mini 75W manual anywher where it talks about how many amps the battery needs to be. I am using a Uuwell Crown tank with a 0.5 dual coil. The cheap batteries that I used with my old Kanger set up are getting hot in this device and are not lasting very long. Does anyone know what the minimum amps are?

Under amp? You can always use less than ratings. not more.

 

[CrazyChef]

All I use these days is Samsung 25Rs. Liion and IMR are two highly trusted sites for authentics - you would be surprised how many "reliable" websites sell fakes, albeit unknowingly (I hope).
Liionwholesale.com
IMRbatteries.com

 

[Rabbit Slayer]

Charging time: about 3 hours
Output Power: 1W-75W Output Voltage: 0.35V-9V
Standby Current: < 300μA
Resistance Range: 0.06Ω—3.0Ω (Temp Mode)
0.1Ω—3.0Ω (Watt Mode)
Temperature Control Range: 200°F-600°F/ 100°C-315°C
Material: Zinc Alloy and Stainless Steel
Max Discharging Current: it should be less than 30A when the atomizer resistance is 0.1 ohm.



That worries me, shouldn't the people that built the mod know exactly what the max discharge on their device is?