Anarchist box mod with series to parelle switch

[bjellovape]

Hey so I recently got The anarchist box mod at the shop I work at as soon as I saw it I had to get it, however now that I look for info on it online there is none for the specific one I have! Mine has a switch inside the mod which allows you to go from series into parallel and vice versa, its such a solid mod Attached is a picture to show you the inside and one just to see the beauty of it.
just looking to see anyone who owns one and how low they have built in series mode with two vct4s
or if someone knows where they have detailed specs on this box somewhere in the world wide web

 

[BadLuckAndTrouble]

The only Anarchist box Ive seen is a collaberation with TugLyfe.
Maybe a clone?

Seems like this guys has a series mode too though, so Idk. Everywhere else says if you try to put the batteries in like a series box it will vent immediately.

Link to other box with series mode:
https://m.reddit.com/r/Cloud_Chaser...build_for_my_anarchist_box_in/?ref=readnext_3

ETA:
Looks clean AF inside though. The other picture isnt showing. Ive never seen one with the VM either, maybe its their newest box and thats why there isnt much info?

 

[Robert B]

Play with the Steam engine calculator. It will answer your questions & be your friend for life... I use a series mech and enjoy 0.8ohm, 26g, 3mm dual coils. Using Steamengine battery drain function, you can clearly see it's pushing 10.5amps max, at about 88w, with nice 52% headroom.

Not sure what specs you're looking for. You have a simple nicely built box that runs parallel or series as far as I can see.

 

[bjellovape]

Yes I used this my myself I have a .56 dual Clapton in my double vision right now and she chucks zero ramp up in series mode it's amazing flavor and vapor production and I'm safe at .56 and it's all I need when the switch is in series mode

 

[Robert B]

Yes I used this my myself I have a .56 dual Clapton in my double vision right now and she chucks zero ramp up in series mode it's amazing flavor and vapor production and I'm safe at .56 and it's all I need when the switch is in series mode

Awesome, series is the way to go in my opinion

 

[allbobbersrule]

Ok, I need clarification on unregulated box mods & the builds allowed on parallel versus series....... i have a royal hunter rda, i have ud prebuilt clapton coils in it, dual coil, each coil is .6 ohm, so in a dual coil that is .3 ohms, or what it equals when i put it on something that reads the ohms, .35 ohms is what the build is......also I use an aspire Atlantis 2 tank with .5 ohm coil, but can use .3 ohm coils also, so which would be better for these , series or parallel...when i get my diy kit I can build either way so i want to make sure i build it the best way for what i vape...if it helps, i will be using lg 2500mAh 18650 batteries in it.

 

[BadLuckAndTrouble]

Parallel, because with series you should be building above .5 ohms

 

[Robert B]

Ok, I need clarification on unregulated box mods & the builds allowed on parallel versus series....... i have a royal hunter rda, i have ud prebuilt clapton coils in it, dual coil, each coil is .6 ohm, so in a dual coil that is .3 ohms, or what it equals when i put it on something that reads the ohms, .35 ohms is what the build is......also I use an aspire Atlantis 2 tank with .5 ohm coil, but can use .3 ohm coils also, so which would be better for these , series or parallel...when i get my diy kit I can build either way so i want to make sure i build it the best way for what i vape...if it helps, i will be using lg 2500mAh 18650 batteries in it.

Find out (google research) what the difference is between series and parallel first. Then play around with http://www.steam-engine.org/ It's not so much about what is "allowed", it's more about what you and your batteries can handle.

 

[allbobbersrule]

ok kewl, that was my biggest lack of knowledge, Thank you... so with that in mind, i will be building a parallel box mod, found DIY kits that are 3d printed abs with all you need for 24.95

http://www.3dboxmod.com/ n e one have any thoughts?

 

[Psychedelic Biscuit]

ok kewl, that was my biggest lack of knowledge, Thank you... so with that in mind, i will be building a parallel box mod, found DIY kits that are 3d printed abs with all you need for 24.95

http://www.3dboxmod.com/ n e one have any thoughts?

looks alright but I would get a FDV 510, also some good solder and the use of flux helps a lot, I dont know if you know how to solder stuff, I had almost no experience with soldering and my first box turned out pretty ugly. For the second one I used a better but still super cheap soldering gun and some flux, which helps very much. Have fun !
Edit: Some heat-shrink tubes are nice to hide solderpoints and give it a clean look, they also can prevent shorts from happening. I recommend buying more than one MosFet, they can be fried to death while soldering pretty quick and in that case its awesome to have a spare around.

 

[Aziemba1386]

Hey so I recently got The anarchist box mod at the shop I work at as soon as I saw it I had to get it, however now that I look for info on it online there is none for the specific one I have! Mine has a switch inside the mod which allows you to go from series into parallel and vice versa, its such a solid mod Attached is a picture to show you the inside and one just to see the beauty of it.
just looking to see anyone who owns one and how low they have built in series mode with two vct4s
or if someone knows where they have detailed specs on this box somewhere in the world wide web

I have one too. Which position does the switch need to be in to be paralell