SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
Hi All, Anthony Vapes back here with my review of the Aspire Tigon Kit, please see the bottom for disclaimers and links. Note this is not marked as a sample
Introduction:
The Aspire Tigon kit is the latest Vape Stick kit from Aspire. Aspire doesn't need much of an introduction as they have been out seemingly forever, since back in the days when it was mostly kangertech, aspire, and joyetech. They have a pretty long history of making good stuff across the board with beginner kits, mods, and tanks. In 2018 they made some good mods like the puxos and some good pod systems like the breeze 2 and spryte. The Aspire Tigon is a MTL beginner stick style kit to compete with a couple of other good ones i’ve reviewed recently like the Innokin Endura T18 II, Geekvape Flint Kit, and the Vandy Vape Berserker MTL Kit so we’ll see how this one stacks up. There are 2 versions a TPD and standard one, i’ll be focusing on the standard one which is the one i recieved. It features an internal 2600mah battery and is a simple non-adjustable stick. It features a LED light for battery charge. The included tank is the Tigon tank and uses new coils 1 for MTL and another for a low watt DTL vape. It’s available in 4 colors, Black, Blue, Rainbow, and SS. Looking around online elementvape has them for 33.95 USD all colors in stock in the USA, and replacement coils for 12.95 for a 5 pack and the tank seperate for 24.95.
Manufacturer's Specs: Battery
album
Tigon Battery Rundown
The Tigon is a non adjustable simple stick with a fire button and nothing else. There is one LED around the fire button. It tell you the battery level by the color. Pink means 3.8V or more, blue means 3.5V-3.8V and red means 3.5V or less. You can fire to check the battery charge as it’s only active when firing or charging. While charging the light is the color of the charge and when it’s full it’ll flash 20 times then turn off. You can also turn the device on and off with 5 clicks of the fire button. Very good job on the design and functionality of this battery.
The stick itself is really nice. There is not much of a design it’s just a basic stick and nothing fancy, very similar to the cascade one plus or voopoo caliber. The coloring is nice as well mine is like a flat blue and isn’t showing any signs of chipping or wearing. It can handle a 23 mm atomizer flush which is the size of the included tigon tank and makes it have an AIO type look to it. It feels well built and is also really light. The USB port is on the back and they list a charge rate of 2A
The only testing I did on this battery is the charge rate and battery capacity. I know i tested some in the past but based on the type of kit it is and what it’s used for I don’t feel it’s 100% necessary. I tested this using an inline USB meters and ran it 3 times overall. The charge rate held very steady around 1.76a so good rating on their part and it charges full in about 1.5 hours. Very fast charging for the battery size, Not to mention the low watts means it lasts a long time. The battery i tested between 2419 mah and 2430 mah so a little short of their listed 2600mah but not too crazy off. I would have felt a little better with a 2500mah rating personally so i’ll consider it slightly overrated but still a great size for the type of device. It also features passthrough vaping as well.
Introduction:
The Aspire Tigon kit is the latest Vape Stick kit from Aspire. Aspire doesn't need much of an introduction as they have been out seemingly forever, since back in the days when it was mostly kangertech, aspire, and joyetech. They have a pretty long history of making good stuff across the board with beginner kits, mods, and tanks. In 2018 they made some good mods like the puxos and some good pod systems like the breeze 2 and spryte. The Aspire Tigon is a MTL beginner stick style kit to compete with a couple of other good ones i’ve reviewed recently like the Innokin Endura T18 II, Geekvape Flint Kit, and the Vandy Vape Berserker MTL Kit so we’ll see how this one stacks up. There are 2 versions a TPD and standard one, i’ll be focusing on the standard one which is the one i recieved. It features an internal 2600mah battery and is a simple non-adjustable stick. It features a LED light for battery charge. The included tank is the Tigon tank and uses new coils 1 for MTL and another for a low watt DTL vape. It’s available in 4 colors, Black, Blue, Rainbow, and SS. Looking around online elementvape has them for 33.95 USD all colors in stock in the USA, and replacement coils for 12.95 for a 5 pack and the tank seperate for 24.95.
Manufacturer's Specs: Battery
- Dimensions - 142mm by 24.5mm
- Integrated 2600mAh Rechargeable Battery
- Wattage Output Range: 10-28W
- Voltage Output Range: 3.3-4.2V
- Coil Resistance: 0.4ohms & 1.2ohm
- Bypass Mode
- Zinc-Alloy Chassis Construction
- Intuitive Single Firing Button
- LED Battery Indicator Light
- 10s Automatic Cut Off
- Short-Circuit Protection
- Low Voltage Protection
- Overcharge Protection
- Over Heat Protection
- Centered 510 Connection
- Micro USB Port
- Available in Stainless Steel, Blue, Rainbow, and Black
- 24.5mm Diameter
- 3.5mL Tank Capacity
- Quartz Glass Reinforcement
- Superior Stainless Steel Construction
- Child-Safe Top Refill System - Pull Up and Slide Back
- Self-Sealing Top Fill Port
- Aspire Tigon Coil Family
- 0.4ohm DTL Coil - rated for 23-28W
- 1.2ohm MTL Coil - rated for 10-12W
- Push Fit Coil Installation - Threaded Bottom
- Spring-Loaded Self Sealing Tank Wicking Ports for Coil Replacement
- Adjustable Bottom Airflow Control Ring - MTL or DTL Style Vaping
- 5 MTL Airflow Options or 1 Large Open Air Slot
- 810 Wide Bore Stubby Delrin Drip Tip
- 810 Elongated Delrin MTL Drip Tip
- Detachable Structure
- Standard 510 Connection
- Available in Stainless Steel, Blue, Rainbow, and Black
- 1 Aspire Tigon Box Mod
- 1 Aspire Tigon MTL Tank
- 1 Spare Glass Tube
- 1 Extra Drip Tip
- 1 0.4ohm DTL Coil - rated for 23-28W
- 1 1.2ohm MTL Coil - rated for 10-12W
- 10 O-Rings
- 1 Micro USB Cable
- 1 Warranty Card
- 1 User Manual
- 0.4ohm DTL Coil - rated for 23-28W
- 1.2ohm MTL Coil - rated for 10-12W
album
Tigon Battery Rundown
The Tigon is a non adjustable simple stick with a fire button and nothing else. There is one LED around the fire button. It tell you the battery level by the color. Pink means 3.8V or more, blue means 3.5V-3.8V and red means 3.5V or less. You can fire to check the battery charge as it’s only active when firing or charging. While charging the light is the color of the charge and when it’s full it’ll flash 20 times then turn off. You can also turn the device on and off with 5 clicks of the fire button. Very good job on the design and functionality of this battery.
The stick itself is really nice. There is not much of a design it’s just a basic stick and nothing fancy, very similar to the cascade one plus or voopoo caliber. The coloring is nice as well mine is like a flat blue and isn’t showing any signs of chipping or wearing. It can handle a 23 mm atomizer flush which is the size of the included tigon tank and makes it have an AIO type look to it. It feels well built and is also really light. The USB port is on the back and they list a charge rate of 2A
The only testing I did on this battery is the charge rate and battery capacity. I know i tested some in the past but based on the type of kit it is and what it’s used for I don’t feel it’s 100% necessary. I tested this using an inline USB meters and ran it 3 times overall. The charge rate held very steady around 1.76a so good rating on their part and it charges full in about 1.5 hours. Very fast charging for the battery size, Not to mention the low watts means it lasts a long time. The battery i tested between 2419 mah and 2430 mah so a little short of their listed 2600mah but not too crazy off. I would have felt a little better with a 2500mah rating personally so i’ll consider it slightly overrated but still a great size for the type of device. It also features passthrough vaping as well.