SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
Hi All, Anthony Vapes back here with my review of the Benecig Killer 260w Mechanical Mod. Please see bottom for disclaimers and links. Note: This is a retail version
Introduction:
The Benecig Killer 260w Mechanical Mod is the latest mod from little known company Benecig. I’ve never even heard of them but we haven’t seen many VV mods come out in the past year if any so I figured it was worth the review for people looking for a VV mod to see if it’s good or not. Looking at their site looks like they only have 2 mods, this one and a 75 watt one, One tank, and one stick kit so seems like they are pretty new with only 4 products total on the market. Also i hate the fact they call it a mech mod, it’s not a mech mod and I won’t refer to it as such in this review going forward and will ding them for it in the cons. The Killer is a dual 18650 VV (variable Voltage) mod rated at 260 watts you adjust with a pot (potentiometer) on the front. Elementvape has them for 54.95. It’s available in 4 colors Silver, Black, Gunmetal and Rose Gold. All colors have carbon fiber inlays and a black battery door.
Manufacturer's Specs: Mod
album
Initial Impressions and features
When I first got this Mod, I was pretty impressed. It’s been a while since a new VV mod has come out. Early in 2017 we seen quite a few. Their was the dovpo M VV which was excellent. There was also the tesla invader 3, tesla invader ⅔, ijoy zenith, and smoant charon 218 adjustable. Seemed to be a growing trend that has sadly died down as they are nice simple mods. Outside of this one the only other one i can think of for 2018 is a new one coming from ijoy. Back to the mod itself it’s a nice looking mod with a massive fire button i consider to basically be a fire bar with the pot built into it. It’s got a nice design and some carbon fiber inlays for flair as well as 2 LED bars one on each side of the mod that serve a purpose of more than just flair. Outside of that just a simple pot to adjust. Overall i really liked this mod form the start.
Performance (chart and spreadsheet in picture album)
Now let’s get into some data. I ran my normal testing. I used Sony VTC5A batteries for the testing. Testing resistances were done at .11, .14, .2, and .61 ohms. Also please note since it’s a pot and not a digital screen I did my best to line up the 2, 3 and 4 the same every time but could be slight variances. The 1 and 5 settings are easy as it’s all the way in one direction. It’s made to give a basic guide as to what to expect at each setting as well as test the max and minimum output which is important on these mods. With a .11 ohm build I got 232 watts and 46 amps max. Very good max amps as the average for a dual mod is around 40. The top ones i get are around 45-46 so it’s right there with the best of them. It was 5.049 max volts. The minimum I got was 2.314V and 49 watts so very good voltage range. With a .14 build I got max watts of 248 so very close to the 260w listed. The voltage range was 5.891 to 2.735 and the wattage range 53 to 248 so very good. With a .2 ohm build I got max 199 watts and the voltage range was 2.525 to 6.311 and wattage range of 32 to 199 so very good again. With a .61 I got a voltage range of 7.679 to 2.63 and a wattage range of 11 to 97. Very good once again.
They don’t list any max specs other then the watts which was a pretty fair rating as well. Not quite 260 but 248 is very close and good and hard to complain about with a dual battery mod. The amp limit is one of the best and no boost circuit but good volt limit as well. Right in line with most regulated mods max outputs. They do have a chart in the manual (pictured in the album) that tells you approx wattage at different resistances and it’s pretty accurate and right in line with my testing so very well done there and should be helpful to people trying to figure out what setting to use. The main thing to look at with these mods is the minimum voltage and the voltage range. The issue i’ve had with some is the minimum output is as high as 3.4 to 3.6 volts meaning with a .1 the minimum output is 115-129 watts which is quite high. Thankfully not an issue here as with a .11 i was able to go as low as 49 watts. In my testing the minimums depending on resistance (high resistance means lower minimum wattage) between 11 and 49 watts so very good. Minimum voltage is between 2.314 and 2.735 in my testing so I’d say the range is 2.4-7.7 for rounding. Very good range
Overall I felt the performance of this mod was really good. It didn’t really struggle with the .11 ohm build which was surprising I was able to get 232 watts at that resistance. I was able to get 248 watts max overall, so I consider it to be accurately rated at 260 watts. It’s close enough and does over 200 and could have maybe gotten a little more had i tested a .17 ohm build. The 7.679 volt limit shows there is no boost circuit. Their manual does not list a volt or amp limit. The most amps i got was 46 with a .11 ohm coil which is way above average for a dual battery 18650 mod and one of the highest out there i’ve tested. The mod never got warm when stressing it at 150 or less watts however over 150 it does take on a lot of heat from the atomizer. Not unsafe hot but more than i would feel comfortable with using all the time. Still i don’t recommend vaping over 150 watts on a dual battery mod and make sure to always use 20a CDR batteries or higher. For people’s normal vaping habits and the safe limits the mod won’t run hot.
Simplified TLDR Power Performance summary
Mod performance is really good. Nice wide range for a VV mod (roughly 2.4 to 7.7), Accurately rated for watts (248), No boost circuit, way above average amp limit of 46. Included watt guide in manual is very accurate and helpful as well.
Introduction:
The Benecig Killer 260w Mechanical Mod is the latest mod from little known company Benecig. I’ve never even heard of them but we haven’t seen many VV mods come out in the past year if any so I figured it was worth the review for people looking for a VV mod to see if it’s good or not. Looking at their site looks like they only have 2 mods, this one and a 75 watt one, One tank, and one stick kit so seems like they are pretty new with only 4 products total on the market. Also i hate the fact they call it a mech mod, it’s not a mech mod and I won’t refer to it as such in this review going forward and will ding them for it in the cons. The Killer is a dual 18650 VV (variable Voltage) mod rated at 260 watts you adjust with a pot (potentiometer) on the front. Elementvape has them for 54.95. It’s available in 4 colors Silver, Black, Gunmetal and Rose Gold. All colors have carbon fiber inlays and a black battery door.
Manufacturer's Specs: Mod
- Dimensions: 65mm by 55mm by 25mm
- Dual High-Amp 18650 Battery - Not Included
- Maximum Wattage Output: 260W
- Maximum Output Current: 35A
- Voltage Output Range: 1.0-8.0V
- 0.02 Seconds Insta-Firing Speed
- Potentiometer-Controlled Adjustment
- Durable Zinc Alloy Construction
- Beautiful Carbon Fiber Inlays
- Oversized Firing Button
- Screenless Design - Efficient Battery Use
- LED Light Up Functionality
- Bottom-Loaded Hinged Battery Door
- Over Heat Protection
- Short Circuit Protection
- Low Voltage Protection
- Over Heat Protection
- Overcurrent Protection
- Stainless Steel 510 Connection
- Available in Black, Gunmetal, Silver, Rose Gold
- 1 Killer 260W Mechanical Mod
- 1 Instructional Manual
album
Initial Impressions and features
When I first got this Mod, I was pretty impressed. It’s been a while since a new VV mod has come out. Early in 2017 we seen quite a few. Their was the dovpo M VV which was excellent. There was also the tesla invader 3, tesla invader ⅔, ijoy zenith, and smoant charon 218 adjustable. Seemed to be a growing trend that has sadly died down as they are nice simple mods. Outside of this one the only other one i can think of for 2018 is a new one coming from ijoy. Back to the mod itself it’s a nice looking mod with a massive fire button i consider to basically be a fire bar with the pot built into it. It’s got a nice design and some carbon fiber inlays for flair as well as 2 LED bars one on each side of the mod that serve a purpose of more than just flair. Outside of that just a simple pot to adjust. Overall i really liked this mod form the start.
Performance (chart and spreadsheet in picture album)
Now let’s get into some data. I ran my normal testing. I used Sony VTC5A batteries for the testing. Testing resistances were done at .11, .14, .2, and .61 ohms. Also please note since it’s a pot and not a digital screen I did my best to line up the 2, 3 and 4 the same every time but could be slight variances. The 1 and 5 settings are easy as it’s all the way in one direction. It’s made to give a basic guide as to what to expect at each setting as well as test the max and minimum output which is important on these mods. With a .11 ohm build I got 232 watts and 46 amps max. Very good max amps as the average for a dual mod is around 40. The top ones i get are around 45-46 so it’s right there with the best of them. It was 5.049 max volts. The minimum I got was 2.314V and 49 watts so very good voltage range. With a .14 build I got max watts of 248 so very close to the 260w listed. The voltage range was 5.891 to 2.735 and the wattage range 53 to 248 so very good. With a .2 ohm build I got max 199 watts and the voltage range was 2.525 to 6.311 and wattage range of 32 to 199 so very good again. With a .61 I got a voltage range of 7.679 to 2.63 and a wattage range of 11 to 97. Very good once again.
They don’t list any max specs other then the watts which was a pretty fair rating as well. Not quite 260 but 248 is very close and good and hard to complain about with a dual battery mod. The amp limit is one of the best and no boost circuit but good volt limit as well. Right in line with most regulated mods max outputs. They do have a chart in the manual (pictured in the album) that tells you approx wattage at different resistances and it’s pretty accurate and right in line with my testing so very well done there and should be helpful to people trying to figure out what setting to use. The main thing to look at with these mods is the minimum voltage and the voltage range. The issue i’ve had with some is the minimum output is as high as 3.4 to 3.6 volts meaning with a .1 the minimum output is 115-129 watts which is quite high. Thankfully not an issue here as with a .11 i was able to go as low as 49 watts. In my testing the minimums depending on resistance (high resistance means lower minimum wattage) between 11 and 49 watts so very good. Minimum voltage is between 2.314 and 2.735 in my testing so I’d say the range is 2.4-7.7 for rounding. Very good range
Overall I felt the performance of this mod was really good. It didn’t really struggle with the .11 ohm build which was surprising I was able to get 232 watts at that resistance. I was able to get 248 watts max overall, so I consider it to be accurately rated at 260 watts. It’s close enough and does over 200 and could have maybe gotten a little more had i tested a .17 ohm build. The 7.679 volt limit shows there is no boost circuit. Their manual does not list a volt or amp limit. The most amps i got was 46 with a .11 ohm coil which is way above average for a dual battery 18650 mod and one of the highest out there i’ve tested. The mod never got warm when stressing it at 150 or less watts however over 150 it does take on a lot of heat from the atomizer. Not unsafe hot but more than i would feel comfortable with using all the time. Still i don’t recommend vaping over 150 watts on a dual battery mod and make sure to always use 20a CDR batteries or higher. For people’s normal vaping habits and the safe limits the mod won’t run hot.
Simplified TLDR Power Performance summary
Mod performance is really good. Nice wide range for a VV mod (roughly 2.4 to 7.7), Accurately rated for watts (248), No boost circuit, way above average amp limit of 46. Included watt guide in manual is very accurate and helpful as well.